Only show results available in Virginia? Ok

waste stream Applications

  • Recycling Equipment for Single Stream Waste

    Optimising output in terms of economic value and against the lowest possible costs per tonne. This is the short-term goal for every Single Stream installation that we provide in cooperation with Bollegraaf. The long-term goal is to ensure permanently low operating costs. The result: fast Return on Investment.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Premium

    Waste sorting solutions for the single stream recycling

    Single stream recycling, otherwise known as dry commingled waste, comprises primarily of paper and cardboard, plastic packaging waste, textiles, cans and, in some cases, glass. The demand for these secondary resources continues to rise compared with that of primary resources.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Several waste gas streams: Highly contaminated oxygen-free waste gas,|and medium waste gas stream

    Explosive oxygen-free waste gases are disposed of and contribute to the oxidation process of the contaminants.

  • Using evaporation to dewater Reverse Osmosis reject waste streams

    Reverse Osmosis (RO) technology has been used for years in various industries to separate dissolved solids from water by forcing the water through a semi-permeable membrane. RO is also commonly used to purify drinking water and desalinate seawater to yield potable water. The water and other molecules with lower molecular weight (specific weight of molecules allowed to pass through is dependent on the selected membrane) pass through the micropores in the membrane, yielding a purified water stream called the permeate. Larger molecules are retained by the membrane as well as a portion of the water that does not pass through the membrane. This concentrated stream is called the concentrate or RO reject.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Waste dewatering for waste management industry

    Separation and dewatering of suspensions are important process stages when treating waste and digester output. BELLMER KUFFERATH machines, within an overall waste management concept, divide waste streams into separate streams in an optimal way in waste treatment plants, for which specific treatment methods make sense. Apart from single machines, BELLMER KUFFERATH also supply complete systems for sortation and dewatering of waste streams.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Premium

    Wastewater treatment solutions for waste sector

    IDRAFLOT flotation units are technological solutions which allow the separation of the suspended solids from wastewater coming from gas scrubber blow down (high concentration of SS) but also for the separation of low density compounds (oil and fats) which can be present in the streams collected by collectors. IDRAFLOT units can be easily installed also within small footprint collection centres.

    By IDRAFLOT based in Zoppola, ITALY.

  • Waste Tyre Recycling Machine

    Waste Tyre Recycling Machine,RESEM provides Pyrolysis Oil Plant systems that convert petroleum based waste streams such as plastics, tires, into quality fuels, carbons.

  • Bespoke Waste Solutions

    At Inciner8 we have many years experience of auditing and profiling waste streams. Over the last few years we have seen an increase in enquiries form the mining sector. The waste challenges cover 2 distinct areas. These are typical camp waste - which will be a mixture of domestics waste, plastics, paper, food wastes etc). The second area is a less clear – Most mining processes involve large by-products whether that be contaminated soils, contaminated water, consumables or other general plant waste from the day to day mining operations. We would work closely with your organisation to ensure the best solution is implemented for your particular waste needs.

    By Inciner8 Limited based in Southport, UNITED KINGDOM.

  • SRF

    SRF Manufacture is an alternative fuel produced by shredding and dehydrating solid waste, typically consisting of combustible components of solid waste, including paper, card, wood, textiles and plastic. It can be produced to a range of specifications to meet customer requirements. Solid Recovered Fuel Manufacture The materials used to produce Solid Recovered Fuel pass through a series of shredders, screens, air classifiers/density separators and magnets. Inert materials, recyclable plastics and metals are extracted from the shredded material, leaving a mix of mainly non-recyclable paper, card, wood, textiles and plastic. Although a small proportion of these materials can be recycled the quality of these materials is compromised once they enter the residual waste stream and recovering energy from these materials is currently the best environmental option. For More information: https://the-mkgroup.com/portfolio/srf-manufacture/

    By MK Group based in Galbally, IRELAND.

  • Premium

    Waste sorting solutions for the refuse derived fuel

    One way in which valuables within waste can be utilized is by using it as fuel. Refuse derived fuel (RDF) is a term that applies to materials with a high calorific value (typically around 18 Mega joule per kilogram) that are removed from waste streams. Beneficiaries of this material are cement kilns to power plants.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Shredding systems for solid & bulky waste

    SSI offers a variety of low-speed, high-torque shredders for size reduction and recycling of solid, bulky waste of nearly all sizes and materials. SSI reducers and shredders are widely used to downsize commingled bulky waste as well as commercial and residential waste streams for volume reduction, to liberate and reclaim recyclables, for composting applications, and to create alternative fuel sources for industry.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Waste recovery for glass manufacturing

    Tetronics` twin torch system has been used continuously for the commercial production of high quality silica glass for optical applications since 1992. Tetronics’ unique twin torch technology allows a plasma arc to be created in space, which enables a falling stream of high quality silica powder to be melted at the junction of the two arcs to form an ingot of high optical quality silica glass. By using plasma as a clean and controllable heat source, the product has a high degree of integrity, because the absence of a natural gas flame means the resulting product is free from bubbles, contamination and other defects.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Separation and dewatering of digester output for waste management industry

    Separation and dewatering of suspensions are important process stages in treating waste and digester output. BELLMER KUFFERATH machines, within an overall waste management concept, divide waste streams into separate streams in waste treatment plants, for which specific treatment methods make sense. Apart from single machines, BELLMER KUFFERATH also supply complete systems for sorting and dewatering of waste streams.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you