Only show results available in Virginia? Ok

waste treatment cost Applications

  • Premium

    Chemical Water Treatment for waste water

    Kurita develops products and solutions for the waste water treatment to improve the water quality and respect the legislation and the environment. Due to increased environmental sensitivity and today’s legislative restrictions, most industrial plants which use water already have wastewater treatment plants. The different Kurita Technologies carefully adapts to the needs of each plant through the optimization and improving the water quality and reducing your operating costs. Improve the water reuse in your facilities and work closely with our customers to reduce the discharges to a minimum level is one of our main targets.

    By Kurita based in Ludwigshafen, GERMANY.

  • Wastewater treatment for the municipal waste water

    The treatment of this type of water requires suitable processes since they have lower costs than industrial waste water but, on the other hand, these effluents have a high nitrogen content.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Filtration in waste water treatments. disinfection

    The cost and efficiency of the waste water treatment is directly linked to the amount of suspended solids in the water.
    The addition of an AZUD System allows:

    • Increased efficiency of the treatment equipment.
    • Decreases the quantity of chemicals used.
    • Avoids the “shadowing effect” created by larger particles in UV disinfection systems.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • municipal and industrial waste water treatment

    glass fused steel tanks are used as various digesters and reactors in municipal and industrial waste water treatment plants. * superior performance in corrosion resistance and against rust *factory fabrication tank . No painting or spray on erection site . * minimal maintenance cost * No need crane or other large equipment during erection * not subjected to severe weather and environment. * can be designed to future expansion, dismantle or re-movement. * free service for technical drawings * turn key service from proposal to tank commissioning .

    By Shijiazhuang Zhengzhong Technology INC. based in Shijiazhuang City, CHINA.

  • Premium

    Portable and fixed gas analysers for sewage / waste water treatment AD

    AD of human waste has been common in many countries for years but increasing energy costs now drive efficiency. Sewage processors are large energy users and AD can offset and help manage this.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a point scoring system to assess operators under the OMA-3 program and this will be used to identify how well a company is managing their processes and possibly identify areas for improvement. The Environmental Permitting Regulations require industry to install instrumentation (MCERTS approved where available) to report water quality. EPR compliance monitoring may include automatic water sampling, flow measurement, pH, turbidity and TOC water analysis. Industry will need to identify point of source emissions, take steps to correct inefficient control and alarm unacceptable process deviations. Although the legislation focuses on environmental improvement, good housing keeping also makes a lot of sense. Optimisation of process control minimises waste, reduces treatment costs and ultimately saves money.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Waste recovery for petrochemical wastes

    Traditionally, the Petrochemical Sector has operated with basic technological solutions, with ultimate reliance on High Temperature Incineration (HTI) and landfill in order to deal with their hazardous wastes. However, tightening regulation, increasing landfill costs and social responsibilities are driving companies to look at alternative methods of treatment of very challenging wastes, including the treatment of:

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Reliable Shredding Technology for Waste Processing

    Our shredders are well suited for a 1-step or 2-step waste recycling. A mechanical-biological waste recycling is usually performed when processing household or commercial waste similar to household waste. The goal of this treatment is to generate a landfill-suited waste material by separating waste fractions with a high calorific value, valuable resources as well as foreign objects. We understand the tough requirements that the shredding technology of a mechanical-biological waste recycling system faces. With our newly engineered XR series we are able to offer the ideal product that meets these tough requirements for both low operating costs and high availability.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Evaporators technology for waste & recycling industry

    The leachate produced by the waste in the landfill is an extremely pollutant effluent that requires high effective treatment processes to comply with the very strict limits for discharging operations. EVALED evaporators are a technological solution which allow to exploit the biogas cogeneration for the full or partial power supply of the plant within the limits of the environmental regulations and to reduce the relevant costs for thermal energy and leachate disposal.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Waste management for dangerous wastes

    A wide variety of wastes are too hazardous to be disposed of by traditional means. Hospitals, clinics, laboratories, nursing homes, funeral homes, dental offices and veterinary clinics are just some examples of places that produce potentially dangerous bioactive waste, often referred to as biomedical waste. Proper disposal of biomedical waste is a complex process that must be carefully controlled to avoid serious public health risks. The waste must be placed in special bags, stored separately, transported in refrigerated trucks and carefully disposed of to eliminate potential exposure. In many cases, the waste must be autoclaved before it is land filled. This complex process results in exceedingly high costs for the disposal and treatment of biomedical waste.

    By Terragon Environmental Technologies Inc. based in Montréal, QUEBEC (CANADA).

  • Waste water monitoring solutions for wastewater treatment industry

    Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Oxygen Generating Systems for Waste Gas Treatment in the Semiconductor, PV and LED Industries

    Waste gas treatment is an often overlooked but important function of Semiconductor, PV and LED fabrication. Several serious accidents have taken place in factories where no abatement was installed. Even today waste treatment is often seen as a cost rather than a safety issue. There are three main reasons why waste gas treatment is installed in factories: health and safety, environmental factors, and quality control.

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Wear-resistant elbow for wastewater treatment industry

    The Smart Elbow eliminates elbow wear in waste water treatment applications. In this demanding field, other types of reinforced elbows can crack, fissure and burst in just a couple of months. Downtime and replacement costs can skyrocket. The Smart Elbow is a long lasting solution due to its ingenious design.

    By HammerTek Corporation based in Bethlehem, PENNSYLVANIA (USA).

  • Wastewater treatment solutions for fat, oil & grease

    Proper waste treatment and free-flowing plumbing lines are critically tied to one another. Of the many products marketed which claim to aid plumbing problems, MICROCAT® products are unique. They offer a combination of micro organisms, enzymes (biochemical catalysts) and other ingredients which act together naturally to soften, loosen, remove and break down greases, fats and oils in plumbing lines, sewer systems, pump stations and treatment plants, thus keeping them clean and odour free. Developed through the years, MICROCAT® products, whether dry or liquid are capable of safely and effectively loosening and digesting the troublesome substances, which clog drainage systems and cause odours. When used on a regular basis, MICROCAT® products can result in savings on operational and maintenance costs.

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

  • Premium

    Coating and Laminating

    MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Fat, Oil and Grease treatment

    Industrial and municipal waste contaminated with fat – a frequent problem for companies maintaining wastewater network infrastructure and municipal wastewater treatment facilities. We recommend the use of GREASOLUX fat dissolvent cartridges to avoid the problems of pipeline chocking, equipment damage, offensive odors, formation of filamentous bacteria, poor wastewater treatment results, poor sedimental properties of activated sludge. GREASOLUX – is a cartridge that slowly dissolves in water, enriched with special fat dissolvent microorganisms and enzymes. GREASOLUX – is an especially efficient product for low cost solutions to problems caused by fat: only few strategically placed cartridges will remove or minimize the problems caused by fat.

    By Ecochemicals UAB based in Kaunas, LITHUANIA.

  • Premium

    Water Treatment Solutions for Iron & Manganese Removal

    For treatment of Iron & Manganese removal, AdEdge Technologies uses our AD26 or ADGS+ media coagulation filtration with ferric chloride as the coagulation agent. This process allows significantly higher flow rates per square feet of media, less backwash water than other conventional approaches, and smaller footprint systems which means lower capital and operating costs. There are no hazardous chemicals or waste involved and the systems may be automated which decreases operator involvement and expense.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Municipal & industrial sludge dewatering

    The waste-sludge generated by primary and secondary (biological) treatment of municipal & industrial wastewater needs to be managed at every plant big or small. In the larger sewage treatment facilities waste sludge thickening and dewatering has always been assumed a necessity without the planners and designers thinking twice about the cost requirements.

    By DEVISE ENGINEERING S.A. based in Athens, GREECE.

  • High-calcium lime slurry for environmental reclamation industry

    Lime slurry can be easily applied to rough terrain with a fine spray, minimizing waste and dust migration while providing a much safer, cost effective alternative. Flue gas treatment for industrial facilities and hazardous waste incinerators.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Sludge monitoring for water and wastewater industry

    Improved monitoring and automation can deliver more efficient waste treatment and reduced energy consumption and improved effluent quality. The cost of treatment and the quality of effluent discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you