Only show results in Virginia? Ok

waste treatment system Applications

  • Biological waste water treatment

    Biological waste water treatment - activated sludge systems - biofilm systems - submerged fixed film system - MBBR-Systems - MBR-Systems - SBR Systems

    By Environmental Engineering Doellerer GmbH based in Seefeld, GERMANY.

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Oxygen Generating Systems for Waste Gas Treatment in the Semiconductor, PV and LED Industries

    Waste gas treatment is an often overlooked but important function of Semiconductor, PV and LED fabrication. Several serious accidents have taken place in factories where no abatement was installed. Even today waste treatment is often seen as a cost rather than a safety issue. There are three main reasons why waste gas treatment is installed in factories: health and safety, environmental factors, and quality control.

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Early warning systems for waste water industry

    Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental impacts.

    By microLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS.

  • MPP water purification systems for industrial waste and process water application

    Removal of total spectrum of non-polar and polar hydrocarbons proven in practice: MPPE removes toxic, non-polar, non biodegradable compounds, aromatics, poly aromatics, halogenated, chlorinated, PCBs, THT (TetraHydroTiophene), Dioxins, CS2 etc. Folowed by biotreatment removing polar biodegradable compounds. Optional: UF and/or activated carbon filtration and RO for reuse as process or boiler feed water.

  • Oxygen Generating Systems for Sewage Treatment

    Using Oxygen to Solve Waste Water Problems Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to: * Reduce nitrogen levels * Meet peak O2 demands * Have a back up to your aeration system * Pre-purify waste water * Control odors * Deter corrosion damage * Meet increased requirements regarding waste water purification

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Waste dewatering for waste management industry

    Separation and dewatering of suspensions are important process stages when treating waste and digester output. BELLMER KUFFERATH machines, within an overall waste management concept, divide waste streams into separate streams in an optimal way in waste treatment plants, for which specific treatment methods make sense. Apart from single machines, BELLMER KUFFERATH also supply complete systems for sortation and dewatering of waste streams.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Premium

    Heat Transfer Equipment for Waste Water Treatment Industry

    For years we are working successfully for environmental protection. Our systems allow to conserve resources through treatment and recovery. For the treatment of wastewater, among other thin film dryers. You can concentrate pastes and sludges, thicken, dry and dehydrate. The good product turnover in the dryer can dry sludge excellent. Process water must often be treated to either be disposed of properly or again recirculate in the process circuit. These combinations of methods are often necessary. In the process of purification solution GIG Karasek thermal processes are the focus. Thin Film Dryer here are the key component.

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a point scoring system to assess operators under the OMA-3 program and this will be used to identify how well a company is managing their processes and possibly identify areas for improvement. The Environmental Permitting Regulations require industry to install instrumentation (MCERTS approved where available) to report water quality. EPR compliance monitoring may include automatic water sampling, flow measurement, pH, turbidity and TOC water analysis. Industry will need to identify point of source emissions, take steps to correct inefficient control and alarm unacceptable process deviations. Although the legislation focuses on environmental improvement, good housing keeping also makes a lot of sense. Optimisation of process control minimises waste, reduces treatment costs and ultimately saves money.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Water treatment systems for chemical industry

    The effluents that accrue in the cleaning process of silo vehicles and containers for transportation of raw materials for the chemical industry, are highly complex and constantly changing in the composition of wastewater. Flocculation as the prior art of treatment for chemical waste water can not remove many of the completely dissolved invisible substances. Thus, the residual stresses are evident despite high claritv of the `Treated effluent` is often well above the levels witch are applicable for wastewater in domestic environments.

    By Weidner Ireland Ltd based in IRELAND.

  • Waste water plant

    Applications of 254nm amalgam UV lamp Municipal Sewage Water Treatment Urban Drinking Water Treatment Swimming Pool and Spa Water Treatment Ventilating duct and air-conditioning system Applications of 185nm amalgam Lamps with Ozone Kitchen Exhaust Cleaning Urban Drinking Water Treatment TOC Reducing Swimming Pool and Spa Water Treatment High Purity Process Water Disinfection

    By CREATOR UV&IR Lighting CO.,Ltd based in Guangzhou, CHINA.

  • Premium

    Ozone Water Treatment for Industrial Water Treatment

    Industrial waste water treatment is a complex area. With Primozone you get at complete partner who can customize an ozone water treatment solution for you. Our ozone generators and ozone water treatment systems are robust and maintenance free. The modular design allows for stepwise upgrades. As a partner we can provide a complete system design or stand alone ozone generator sales. We have mobile pilot test equipment and are happy to do pilot tests to get the perfect solution. We can adapt our solutions to fit yours.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Shredders for Hazardous and Medical Waste

    SA Eng. designs and manufactures single machines and / or complete plants for the treatment of Hazardous Waste. The supply can relate to the single shredder used only for the volume reduction of the material or to imply the use of a Nitrogen Blanketing System of the machine and / or of the complete system with subsequent separation of the product. SA Eng. provides for the study of customized systems in compliance with the specific need/request of each customer.

    By SA Eng. based in San Donà di Piave, ITALY.

  • Premium

    Reliable Shredding Technology for Waste Processing

    Our índustrial waste shredders are well suited for a 1-step or 2-step waste recycling. A mechanical-biological waste recycling is usually performed when processing household or commercial waste similar to household waste. The goal of this treatment is to generate a landfill-suited waste material by separating waste fractions with a high calorific value, valuable resources as well as foreign objects. We understand the tough requirements that the shredding technology of a mechanical-biological waste recycling system faces. With our newly engineered XR series we are able to offer the ideal product that meets these tough requirements for both low operating costs and high availability.

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.

  • Premium

    Waste water treatment plants Personnel Safety & H2S filter management

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. As a result of the confinement of the waste water stations, toxic components such as H2S and Methylmercaptan increased. Safety of employees on such working sites has therefore become of major problem. To fight this hazardous pollution, air filtering systems have been installed. For the station managers, personal safety coupled with the need for constant air quality control and filter change has been a heavy task.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Compressed air, gas and vacuum solutions for water and waste water treatment

    There are many options to apply methods to avoid damaging the environment. In the case of wastewater e.g. the ventilation of the sediment tank or the pressure ventilation of biological wastewater treatment systems. The oxygen introduction is important, for deep wastewater tanks, wastewater treatment systems with standard aeration tanks or natural clarification ponds alike. If the wastewater has already entered the natural cycle, ventilating lakes and rivers prevents additional contamination. When treating drinking water, rinsing the filters with compressed air ensures that perfect water is provided and natural water reserves are not used excessively.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Ultraviolet disinfection systems for the wastewater industry

    UV technology has made tremendous gains in the last 25 years and is now recognised as a primary method of disinfecting waste water. atg UV Technology have researched the wastewater industry and identified the need for a range of compact closed chamber UV systems, which are easy to install into a pipeline, can deal with a wide range of water qualities and offer a high output within a small foot print. The advanced range of atg UV systems have successfully treated a wide range of fluids, in many different industries and have been installed on traditional and specialist wastewater treatment works worldwide.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Odour measurement on industrial sites like waste water treatment plants (WWTP), landfill, compost plant...

    CairNet is a simple and efficient way to monitor processes and plant surroundings via a wireless communicating network and autonomous (solar panel and battery). CairNet surveys fugitive emissions of toxic gases or odourous gases around waste water treatment plants (WWTP), allowing you to react quickly to gas leaks. CairNet allows the wireless survey of hundreds of measurement points within a 200m radius of the wireless receiver for a much efficient installation cost. Cairpol systems can be used for fugitive emissions and odour measurement on industrial sites like waste water treatment plants (WWTP), landfill, compost plant, along a street or motorway, or in any sensitive area. Read more https://www.environmental-expert.com/products/cairpol-cairnet-autonomous-real-time-pollution-monitoring-network-274828

    By Cairpol Environnement S.A based in POISSY Cedex, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you