Only show results available in Virginia? Ok

waste truck Applications

  • Premium

    Odor control for liquid waste

    Vaporize Odors Associated With Liquid Waste Processing: Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable byproducts.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Waste management for dangerous wastes

    A wide variety of wastes are too hazardous to be disposed of by traditional means. Hospitals, clinics, laboratories, nursing homes, funeral homes, dental offices and veterinary clinics are just some examples of places that produce potentially dangerous bioactive waste, often referred to as biomedical waste. Proper disposal of biomedical waste is a complex process that must be carefully controlled to avoid serious public health risks. The waste must be placed in special bags, stored separately, transported in refrigerated trucks and carefully disposed of to eliminate potential exposure. In many cases, the waste must be autoclaved before it is land filled. This complex process results in exceedingly high costs for the disposal and treatment of biomedical waste.

    By Terragon Environmental Technologies Inc. based in Montréal, QUEBEC (CANADA).

  • Bulky Waste Removal

    JLM Equipment Inc. provides quality grapple truck equipment to aid in the clearing and removal of bulky waste for the Forestry - Agriculture industry. This equipment improves the safety and cost efficiency of removal of debris.

    By JLM Equipment based in Lake Wales, FLORIDA (USA).

  • Continuous process waste tyre to oil recycling

    Solution: Continuous pyrolysis plant Function: Recycling waste tire to fuel oil Applicable raw material: Car tire, Truck tires, OTR tries, etc Output: 45-52% crude oil, 30% carbon black,12-15%steel wire, 8% waste gas Heating fuel: Coal / wood / fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/Q345 Boiler plate

  • Solid Waste Collection

    We provide equipment for municipal solid waste collection. Including but not limited to commercial front loaders, automated side loaders, rear loaders, recycling trucks, grapple trucks, Dump Loc body supports, and X1R lubricators for the solid waste industry, recycling and bulky waste collection.

    By JLM Equipment based in Lake Wales, FLORIDA (USA).

  • Premium

    Tire shredding

    SSI offers a wide variety of solutions for people who want to process tires for cars, trucks, aircraft, agricultural and OTR/Mining tires. Our focus has been to develop reliable, robust and easy-to-work-on equipment that will reduce whole tires down to chunks ranging in size from long “strips” to 1` or 2` (25-50mm) chips. We have systems that can process tires at rates ranging from 2 tons (200 car tires) to over 30 tons (3,000 car tires) per hour. Tires do not need to be debeaded in order to be shredded in our equipment.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Flaring Solutions for the Landfill Industry - Leachate Evaporation

    Increased concern for the environment has led to new opportunities for landfills to better manage their waste gas. ABUTEC works with the landfill industry to ensure that leachate evaporation is handled in the most efficient way possible. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning landfill waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. When combined with a heat exchanger, the unit can efficiently evaporate the leachate eliminating the need for expensive trucking or disposal.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Oil & Gas Produced Water

    Because of the huge increase in U.S. natural gas production, there is elevated concern over the production of water that occurs in natural gas and oil fields. These concerns have led to additional state and federal regulations for low emission combustion technology and how companies will deal with produced water. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO2 and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. Additionally, when combined with a heat exchanger, the unit can evaporate the excess produced water eliminating the need for expensive trucking or disposal.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you