Only show results available in Virginia? Ok

wastewater aeration Applications

  • Air control for wastewater treatment aeration

    Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity`s sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result, large compressors are used to force air through hundreds of air diffusion filters at the bottom of the aeration basins, providing a constant 24/7 supply of oxygen to the micro-organisms in the water.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Regenerative blowers

    Regenerative blowers for waste water aeration. Rotary lobe blowers for waste water aeration.

    By Air Power Products Limited based in Cambridge, ONTARIO (CANADA).

  • Automated solutions for the aeration lagoon / pond dredging

    LWT`s dredging systems are used for aeration lagoon / pond dredging applications. A dredging system for removal and disposal of raw sewage solids, decayed algae and microorganisms, and algae-laden sludge results in a long term solution for treatment plants. Aeration lagoon / pond dredging increases lagoon storage volume, provides improved detention time, and accommodates increased plant flow.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Acid Eddy Chemical Dilution Trough

    By Global Treat, Inc based in Spring, TEXAS (USA).

  • Water quality monitoring systems for wastewater & effluents monitoring industry

    Instruments for monitoring the aeration-process, nitrification and de-nitrification; chlorination and de-chlorination; as well as the final discharge into the environment.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Electrical Based Tomography Systems for Batch mixing

    Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing). Alternatively, an array of up to 8 circular planes, each with 16 electrodes can be used to provide a more complete picture of the mixing process.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Premium

    Solutions for the wastewater sector

    Conventional wastewater treatment systems are focused on efficient removal of polluting components. This is commonly done through aeration and separation of formed biomass from the cleaned water. After treatment the water would be discharged onto surface waters or subsoil irrigation. Introduction of polishing steps after these treatment systems opened up the possibilities to reuse water for either irrigation or even potable water. DMT Environmental Technology also implements these solutions with its MemBioRex membrane bioreactor. Nowadays novel technologies enable reuse of saline water within industries such as unconventional oil and gas, industry, agriculture, and mining. DMT Water Technology develops and realises innovative products to enable our customers to meet these challenges.

    By DMT Global Environmental Solutions BV based in Joure (NL), NETHERLANDS.

  • Premium

    Water Storage for the Wastewater Industry

    Liquid waste discharged by domestic residences, commercial properties, industry, and/or agriculture. Superior Tank Co., Inc. offers a wide range of products such as Open Tops, Aeration and Trickling Filter tanks. Our engineers can create a wastewater bolted or welded steel storage tank system that will best suit your needs. We are able to package and ship our bolted and welded steel storage tanks internationally.

    By Superior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA).

  • Premium

    Water quality monitoring for municipal wastewater industry

    Real Tech’s analyzers can be used in municipal wastewater treatment applications to ensure environmental compliance and to increase process efficiency by continuously monitoring the incoming loads and making process adjustments accordingly to optimize aeration rates, and nutrient and chemical dosing.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Wastewater solutions for municipal sewer control

    Problem: A significant portion of the operational costs of a conventional municipal wastewater treatment plant employing an aerobic biological treatment unit comes from electricity costs associated with aeration. In many cases, the aeration rates are kept at the maximum level to ensure that the plant’s effluent is in compliance with the regulations. The critical parameter for regulatory purposes and treatment efficiency, BOD, takes 5 days to measure through standard methods providing almost no value to the plant operators in terms of adjusting aeration rates and chemical dosing.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Oxygen Generating Systems for Sewage Treatment

    Using Oxygen to Solve Waste Water Problems Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to: * Reduce nitrogen levels * Meet peak O2 demands * Have a back up to your aeration system * Pre-purify waste water * Control odors * Deter corrosion damage * Meet increased requirements regarding waste water purification

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Waste water respirometry solutions for process optimisation

    Respiration rate of activated sludge has been recognised as a key controlling element in the modelling of process control, by the International Water Association Task Group. Actual respiration rate of the sludge in the aeration tanks, as well as the endogenous and maximum respiration rates are variables that indicate the rate of BOD removal and aeration requirements. The maximum respiration rate is also closely linked to the Critical Oxygen Concentration point, that is, the point at which diffusion over the bacterial cell walls ceases and therefore biodegradation is significantly compromised.

    By Strathkelvin Instruments Ltd. based in Motherwell, UNITED KINGDOM.

  • Environmental technology for water treatment industry

    In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification.  Further applications are: Diluting and conveying acids and lye during the process of regenerating ion exchangers.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Premium

    Flow measurement instrumentation for waste water treatment flow solutions

    With its high turndown and direct mass flow, our immersible thermal meters are the instrument of choice for measuring aeration basin air flow and monitoring digester gas. Our vortex meters are used to measure steam in the cogeneration processes, while our ultrasonic flowmeters are used for influent and effluent measurement.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Enhanced Biosolids and Bio Sludge Dewatering with Wilsa EWC

    IMPROVED BIOSOLIDS/ BIO SLUDGE DEWATERING WITH WILSA® CONDITIONING The WILSA ElectroWave™ effect can be used to condition polar fluids to alter their physical properties, improving several chemical and physical processes. - Reducing surface tension to improve the ability of water to repel solids - break physical / chemical emulsions - Increasing the contact angle of water - improve coalescing of solid particulate toaccelerate phase separation - Lowering the viscosity of water - reduce friction of flocculated solids dropping through less viscous water - Lower viscosity, reduced surface tension and increased contact angle of water - improve aeration of wastewater Installation of WILSA® ElectroWave Conditioner upstream of a belt press at a wastewater treatment plant resulted in polymer usage dropping by >50% while achieving much dryer solids.

    By Hudson Industries based in Vienna, OHIO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you