Only show results in Massachusetts? Ok

wastewater analysis Applications

  • Premium

    Mercury analysis for wastewater

    By Analytik Jena AG based in Jena, GERMANY.

  • Precision moisture analysis instruments for fast, accurate solids analysis for wastewater

    Computrac moisture, solids and ash analyzers are able to quickly and easily determine solids content of cakes, slurries and sludge samples for the wastewater, hazardous waste and landfill industries. Identifying the optimal solids content of these byproducts of the treatment process can provide significant cost savings on chemical additives, haulage and incineration. Computrac analyzers are easy to use and their rugged and reliable design means that you’ll get accurate results whether they’re in the...

    By AMETEK Brookfield based in Chandler, ARIZONA (USA).

  • Premium

    Water analysis for municipal wastewater treatment

    Voltammetric determination of many heavy metals is also possible in municipal or industrial wastewater. On account of the usually high organic load the sample is usually mineralized by means of UV digestion.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Bromate analysis for the drinking water industry

    Bromate forms during the ozonization of drinking water. Several international standards stipulate detection limits and test methods. Conductivity detection with chemical suppression allows the determination of bromate in the lower μg/L range. In the ng/L range, bromate can be detected by IC/MS coupling or post-column derivatization with potassium iodide and subsequent UV detection.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Drinking water analysis for municipalities

    GE Analytical Instruments offers several Sievers TOC Analyzer models designed specifically to simplify monitoring of drinking water treatment plants. Always knowing the TOC levels throughout a water treatment plant, and improving TOC reduction, can help a plant not only control DBPs, but also implement efficient and potentially cost saving treatment processes.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Premium

    Applications of low gas flow measurement in wastewater analysis

    Whether you are a researcher or an operator working with wastewater treatment processes, it is crucial to have access to highly accurate and precise data to get insight into the wastewater treatment processes.

    By Bioprocess Control Sweden AB based in Lund, SWEDEN.

  • Gas analysis & monitoring systems for water - natural sciences

    In nature, the chemical elements can be represented by more isotopes, or atoms of the same element, characterized by a different number of neutrons in the nucleus. When the proton / neutron ratio does not exceed that value likely to upset the balance of the atom, resulting in the phenomenon known as stabilization of radioactive decay, the isotope is called stable. That is, over time, will not tend to emit energy and sub-nuclear particles to gain energy stability, giving rise, at the end of the process, the...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Data analysis and visualization tools for surface water modelling

    Volumetric modeling of surface water bodies to include mapping of properties data into the volume requires the capabilities only found in EnterVol. When trying to assess the health of a lake, river or stream, volumetric data is essential. Once you apply the capabilities of EnterVol to this task, you’ll discover trends in your data that were previously hidden or suppressed by the limitations of 2D techniques.

    By C Tech Development Corporation based in Las Vegas, NEVADA (USA).

  • Precision moisture analysis instruments for Hydrogen Sulfide (H2S) monitoring for wastewater treatment

    Control nuisance odors with accurate monitoring. In wastewater treatment, nuisance odors can end up being much more than just a nuisance. Complaints about hydrogen sulfide odors can lead to citations, penalties or worse. Don’t wait for your neighbors to let you know that you have an odor problem; keep on top of hydrogen sulfide odors with a Jerome hydrogen sulfide monitoring solution.

    By AMETEK Brookfield based in Chandler, ARIZONA (USA).

  • Premium

    RAPID ANALYSIS OF TOTAL MERCURY IN WASTE WATERS AND PROCESS WATERS WITH ELEVATED MERCURY CONTENT USING DIRECT PYROLYSIS TECHNIQUE

    A conventional standard method of total mercury determination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that takes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct determination of mercury in process and waste waters contaminated with mercury without digestion or any other sample preparation stages. The...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Water monitoring technology for coastal & estuary

    Measurement of water quality in coastal regions and estuaries is critical in the characterization of hypoxic ‘dead zones’ as a result of nutrient loading and algal blooms in the water bodies. Sediment loading analysis through turbidity measurement is also important for coastal trend identification and modeling. Hydrolab and Sea-bird Coastal offer a variety of multiparameter water quality instrumentation and nutrient sensors for long-term coastal applications.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Determination of zinc in water by fluorimetric method

    In accordance with WHO’s Guidelines for Drinking Water Quality there is no health-based guideline value of zinc in water concentration. Concentration of zinc in tap water can increase as a result of its dissolution from pipes. Also, elevated levels of zinc may be an indicator of increased concentrations of other toxic metals; thereby zinc in water analysis is an essential analytical task. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of zinc in...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of the chemical oxygen demand (COD) in water

    Introduction Chemical Oxygen Demand (COD) is one of the most common integral indicators of anthropogenic pollution of water bodies. COD is widely used in the analysis of natural water, to control wastewater treatment from organic various substances.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Final effluent monitoring for wastewater treatment industry

    Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Monitoring industrial trade discharge for wastewater treatement industry

    Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you