Only show results available in Virginia? Ok

wastewater analyzer Applications

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Water-Wastewater Measurements / NO analyzers for measurement of nitrification processes

    NO analyzers for measurement of nitrification processes applied for treating high concentration nitrogen wastewaters by microbial nitric oxide production. Also, the conversion of N-nitrosomines to nitric oxide for the quantification of those compounds in wastewater impacted waters. View Water-Wastewater Measurement Products

    By ECO PHYSICS INC. based in Duernten, SWITZERLAND.

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a wastewater treatment plant. An important feature of any FOG program is locating and monitoring high oil and grease producing industries and food service establishments. InfraCal TOG/TPH Analyzers provide a simplified procedure for FOG analysis based on solvent extraction and infrared absorption which can give the regulator or operator an on-site result in less than 10 minutes.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Water quality monitoring for municipal wastewater industry

    Real Tech’s analyzers can be used in municipal wastewater treatment applications to ensure environmental compliance and to increase process efficiency by continuously monitoring the incoming loads and making process adjustments accordingly to optimize aeration rates, and nutrient and chemical dosing.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Online Monitoring for the Wastewater Treatment Industry

    AppliTek`s large portfolio of on-line analyzers enables you to monitor precisely the complete treatment process, from influent to effluent. Compliance with discharge regulations is another application example and typically expressed as sum parameters, for which AppliTek has unique solutions.

    For more information, please check the detailed section in this website on these topics:

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online Monitoring for the Drinking Water Industry

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards.

    On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Water quality monitoring systems for feedwater, storm & condensate industry

    The most important parameters in Water/Steam Cycles such as Cation conductivity, dissolved oxygen and pH are available as pre-assembled and factory tested units. Dedicated analyzers for sodium, silica, phosphate and hydrazine are also factory tested and calibrated for immediate operation.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Water quality monitoring systems for portable water plants

    Low maintenance and reliability are key requirements for analyzers in potable water plants. Cost of ownership is another big issue.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Drinking water analysis for municipalities

    GE Analytical Instruments offers several Sievers TOC Analyzer models designed specifically to simplify monitoring of drinking water treatment plants. Always knowing the TOC levels throughout a water treatment plant, and improving TOC reduction, can help a plant not only control DBPs, but also implement efficient and potentially cost saving treatment processes.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Premium

    Environmental Control for the Water Utility Industry

    This section contains applications relevant for compliance, water treatment, drinking water and natural sources.

    Collecting, treating and distributing water to consumers and industry, in compliance with quality standards, means a challenging task to water companies. Both private as public water treatment entities have to manage carefully and sustainably their sources, processes and even distribution networks. AppliTek supports them not only with an extended portfolio of analyzers but also with its experience in the advice, design and construction of complete monitoring systems and stations.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Water Data Management Solution for Irrigation Sector

    Monitor and report the flow in your irrigation system. As a manager of an irrigation district, farmer, or city operations manager, a KISTERS solution provides an effective tool for easily managing, analyzing and reporting on irrigation activities. Even use it to calculate pump efficiencies, leak detection, water balances and monitor water supply contracts!

    By KISTERS AG based in Aachen, GERMANY.

  • Water quality monitoring systems for cooling water treatment industry

    A number of treatment products are often added to prevent corrosion, scaling and fouling. Coating of sensors and other effects of these products must be taken into account when selecting analyzers. Discharge monitoring needs special attention because zero measurements must be reliable over time with little maintenance.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Water quality monitoring systems for high water purifier industry

    The monitoring of “Ultra Pure Water” or “High Purity Water” requires the lowest possible detection limits for process analyzers. Resistivity is often around 18 MΩ. Dedicated instruments can detect infinitely small amounts (ppt e.g. parts per trillion) of ions.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Premium

    Waste water treatment plants Screening area: stripping

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. To ensure the safety of operatives in the screening building/area of waste water treatment works an H2S analyzer has been installed in the main building to complement the protection provided by individual monitors. Chromatographic measurements show that other sulfurous compounds including Methylmercaptans are present in the air in addition to H2S.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • TOC Correlation to BOD or COD

    Challenge: Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) are traditional parameters analyzed in the laboratory to determine organic matter in water and wastewater. Wastewater facility operators need to have constant data to monitor their discharges and optimize treatment processes (biological treatment, chemical dosing, etc). The requirements of BOD and COD analysis prevent them from being implemented as control parameters, however. The BOD five-day analysis time requirement does not allow an operator to use the data for process optimization and. although COD requires less time than the BOD, its analysis includes the use of hazardous chemicals and has no constant analysis capability.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you