Only show results available in Virginia? Ok

wastewater collection Applications

  • Cover and Liner Systems for Rainwater Collection

    Rainwater collection is a huge expense, particulary in the southeast and lower midwest where rainwater becomes a mayor operational expense.   The rainwater can be pumped off-site or collected in a separate pond or lagoon.

    By Industrial & Environmental Concepts, Inc. (IEC) based in Lakeville, MINNESOTA (USA).

  • Spent coolant wastewater solution

    Waste coolant or spent coolant wastewater is one of the more common applications for ENCON Wastewater Evaporators. The most common type of coolant is made up of water-soluble oils, but water-soluble synthetics or semi- synthetics are also used. The coolants are used to cool the tool and part to minimize overheating during machining and grinding applications. The coolant is collected in sumps and continuously recirculated. In time, the coolants break down and become less effective. The coolants, now spent, must be disposed of.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Premium

    Elimination of mercaptan odor for wastewater lagoons

    Wastewater lagoons are utilized to collect and stabilize wastewater. Approximately one third of all U.S. secondary waste treatment facilities employ some type of pond system. Lagoons can become septic, or contain compounds that product significant odors.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Premium

    Municipal wastewater solutions for combined sewer overflow industry

    WesTech offers combined sewer overflow (CSO) equipment, which greatly helps communities where excessive rain events cause the sewer system to be overwhelmed. WesTech provides multiple solutions that will optimize your collection and retention facilities and reduce the contaminants released during CSO events.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Grease removing in wastewater pipes

    Whether a collection system is handling domestic, commercial, or industrial waste; grease accumulation causes problems in wet wells, lift stations and pipelines. Problems with grease include interference with wet well level controls, reduced wet well capacity, plugging of pipes and pumps, and unsafe working conditions.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Premium

    Municipal wastewater solutions for combined sewer overflow industry

    WesTech offers combined sewer overflow (CSO) equipment, which greatly helps communities where excessive rain events cause the sewer system to be overwhelmed. WesTech provides multiple solutions that will optimize your collection and retention facilities and reduce the contaminants released during CSO events.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Wastewater treatment management for storm water treatment industry

    Aging treatment and collection systems in developed countries and the lack of appropriate treatment systems in developing countries along with higher precipitation levels occurring over short periods of time are driving government and industry leaders to expand or upgrade stormwater treatment systems to keep surface water bodies clean, while using this collected water for use in non potable applications.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Remote monitoring stations

    The Water Survey of Canada, a division of Environment Canada, is a federal government agency responsible for collection, interpretation and dissemination of water source data and information. As a division of Environment Canada, the Water Survey of Canada (WSC) covers a vast range of topographical environs from Arctic Canada to the US border with elevations varying from sea level to over 13,000 feet (4,000 metres). An estimated 7% of the world’s renewable water supplies are found in Canada. Canada’s hydrology is incredibly diverse thanks to a wide range of bio-physical ecozones. WSC operates in partnership with all of the Canadian provinces, territories and other agencies, operating over 2,500 active hydrometric gauges across the country. The hydrologic and socioeconomic diversity found in Canada makes water resource management incredibly challenging.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Premium

    Software Solutions for Sanitary Sewers Modeling

    Wastewater systems are vital to the continued environmentally safe and sound performance and growth of communities throughout the world. Wastewater engineers promote stewardship in the operation, maintenance and management of various types of sanitary or foul water collection systems.

    By XP Solutions based in Portland, OREGON (USA).

  • Premium

    Monitoring of hydrocarbons in bilge water

    The Situation

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Precipitation measurement

    From simple manual rainfall collection devices, electronic tipping bucket rain gauge sensors, through to fully autonomic stand alone data logging systems with telemetry for hydrological network applications.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Wastewater treatment solutions for waste sector

    IDRAFLOT flotation units are technological solutions which allow the separation of the suspended solids from wastewater coming from gas scrubber blow down (high concentration of SS) but also for the separation of low density compounds (oil and fats) which can be present in the streams collected by collectors. IDRAFLOT units can be easily installed also within small footprint collection centres.

    By IDRAFLOT based in Zoppola, ITALY.

  • Premium

    Water accountability portable monitoring for solving flow rate mystery

    The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • OneRainware™ - Radar rainfall for real-time and analytical applications.

    Accurate estimation of the spatial distribution of rainfall is critical to successfully model hydrologic processes. OneRain has worked with engineering firms and those with responsibilities in Stormwater and Wastewater Management across the U.S. to provide radar rainfall data to help characterize storm events or flow problems in collection systems and as a basis for both real-time and design-oriented modeling. OneRainware products and services offer: *Real-time gauge-adjusted radar rainfall (GARR) data *Real-time area-average rainfall *Real-time forecast rainfall *End-of-month archive quality gauge-adjusted radar rainfall data *Historical and post-event analysis using archived rainfall estimates *Web-delivered calibrated radar-rainfall data *StormProperties™ Analysis. GARR data are used in flood warning, runoff modeling, basin modeling, I/I studies, litigation, real-time control, design storms, and National Pollutant Discharge Elimination System (NPDES) compliance activities.

    By OneRain Incorporated based in Longmont, COLORADO (USA).

  • Water Data Management Solution for Water Quality

    Monitor any water quality parameter you collect, no matter where it has been collected from. Store quality data from manually or automatically collected spot samples, and even continuously collected samples such as those from auto-samplers and sondes.

    By KISTERS AG based in Aachen, GERMANY.

  • Vacuum excavation solutions for resetting of headstones in cemetery

    Using a Vac-Tron vacuum excavator to soft-dig the hole for the Placement of Headstones. They are usually 3’ long x 2’wide and 3’ deep. You can drive through the grave yard on the roads and run your hose out and dig your foundation hole using vacuum. When you’re done all the dirt is collected in the debris tank. No one will ever know you were there. This is a very clean and respectful way to place Head Stones.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Microbial formulations for municipal sector

    MICROCAT microbial formulations from Bioscience, Inc., are blends of specialized, naturally occurring microbes and other ingredients that work together to solve the most common, damaging problems inherent to municipal wastewater plants. By augmenting existing microbial populations, MICROCAT products naturally aid in stabilizing municipal sewage treatment and collection systems, enhancing their ability to break down difficult-to-degrade wastes and handle highly variable waste treatment conditions.

    By Bioscience, Inc. based in Allentown, PENNSYLVANIA (USA).

  • Fibre Optic Distributed Temperature Sensing for Borehole Flow Monitoring

    Subsurface environments are critical not only as water resources but also for energy use including geothermal, CO2 sequestration and oil & gas operations. These sensitive environments are directly affected by anthropogenic activities, hence monitoring is essential. Temperature offers insight into a variety of physical properties and can be used for flow monitoring and flux quantification in the subsurface. Traditionally, point sensors have been used to collect temperature data; however, significant limitations exist.

    By Silixa Ltd based in Elstree, UNITED KINGDOM.

  • Disposal and Cleaning Equipment for Waste Water Industy

    Drinking water is not the only area requiring flow monitoring. The disposal and cleaning of waste water also requires flow meters. Waste water used to be dumped directly into the soil or an open channel. As awareness has increased, most discharges are now treated to assure long term sustainability. Modern water treatment plants are highly complex systems that require the use of flow sensors to monitor flow velocity in open channels for waste water discharge. Likewise facilities for waste water collection and clarification plants need regular data on flow rate. The use of radar non contact flow measurement and ultrasonic doppler flow meters are particularly efficient. HydroVision can complete flow measurements in all of these areas.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you