Only show results available in Virginia? Ok

wastewater collection system Applications

  • Premium

    Elimination of mercaptan odor for wastewater lagoons

    Wastewater lagoons are utilized to collect and stabilize wastewater. Approximately one third of all U.S. secondary waste treatment facilities employ some type of pond system. Lagoons can become septic, or contain compounds that product significant odors.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Premium

    Municipal wastewater solutions for combined sewer overflow industry

    WesTech offers combined sewer overflow (CSO) equipment, which greatly helps communities where excessive rain events cause the sewer system to be overwhelmed. WesTech provides multiple solutions that will optimize your collection and retention facilities and reduce the contaminants released during CSO events.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Grease removing in wastewater pipes

    Whether a collection system is handling domestic, commercial, or industrial waste; grease accumulation causes problems in wet wells, lift stations and pipelines. Problems with grease include interference with wet well level controls, reduced wet well capacity, plugging of pipes and pumps, and unsafe working conditions.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Premium

    Municipal wastewater solutions for combined sewer overflow industry

    WesTech offers combined sewer overflow (CSO) equipment, which greatly helps communities where excessive rain events cause the sewer system to be overwhelmed. WesTech provides multiple solutions that will optimize your collection and retention facilities and reduce the contaminants released during CSO events.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Precipitation measurement

    From simple manual rainfall collection devices, electronic tipping bucket rain gauge sensors, through to fully autonomic stand alone data logging systems with telemetry for hydrological network applications.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Water accountability portable monitoring for solving flow rate mystery

    The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Disposal and Cleaning Equipment for Waste Water Industy

    Drinking water is not the only area requiring flow monitoring. The disposal and cleaning of waste water also requires flow meters. Waste water used to be dumped directly into the soil or an open channel. As awareness has increased, most discharges are now treated to assure long term sustainability. Modern water treatment plants are highly complex systems that require the use of flow sensors to monitor flow velocity in open channels for waste water discharge. Likewise facilities for waste water collection and clarification plants need regular data on flow rate. The use of radar non contact flow measurement and ultrasonic doppler flow meters are particularly efficient. HydroVision can complete flow measurements in all of these areas.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • OneRainware™ - Radar rainfall for real-time and analytical applications.

    Accurate estimation of the spatial distribution of rainfall is critical to successfully model hydrologic processes. OneRain has worked with engineering firms and those with responsibilities in Stormwater and Wastewater Management across the U.S. to provide radar rainfall data to help characterize storm events or flow problems in collection systems and as a basis for both real-time and design-oriented modeling. OneRainware products and services offer: *Real-time gauge-adjusted radar rainfall (GARR) data *Real-time area-average rainfall *Real-time forecast rainfall *End-of-month archive quality gauge-adjusted radar rainfall data *Historical and post-event analysis using archived rainfall estimates *Web-delivered calibrated radar-rainfall data *StormProperties™ Analysis. GARR data are used in flood warning, runoff modeling, basin modeling, I/I studies, litigation, real-time control, design storms, and National Pollutant Discharge Elimination System (NPDES) compliance activities.

    By OneRain Incorporated based in Longmont, COLORADO (USA).

  • Microbial formulations for municipal sector

    MICROCAT microbial formulations from Bioscience, Inc., are blends of specialized, naturally occurring microbes and other ingredients that work together to solve the most common, damaging problems inherent to municipal wastewater plants. By augmenting existing microbial populations, MICROCAT products naturally aid in stabilizing municipal sewage treatment and collection systems, enhancing their ability to break down difficult-to-degrade wastes and handle highly variable waste treatment conditions.

    By Bioscience, Inc. based in Allentown, PENNSYLVANIA (USA).

  • Agricultural, Storm and Highway Runoff

    The ability to collect useful data about sediment transport and other pollutants closely coupled to SSC (such as nutrients, e-coli, phosphates and nitrates) is dependent on the timing and frequency of manual grab samples during run-off events. Most sediment and pollutant is transported during a small number of storm events which are infrequent and unpredictable. When they do occur, trained personnel or the proper equipment may not be available to collect grab samples. An automated pump sampler can eliminate the need to sample manually, but for the expense of a rechargeable power system, the autosampler, and possibly a datalogger and a typical turbidity probe, you’re no better off. With an automated pump sampler driven by the DTS-12 digital turbidity sensor and controlled by the Axiom H2 datalogger, you obtain a better understanding of the water’s quality, while taking a minimum number of samples, reducing site visits and saving lab analysis costs.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Circuits Protections; nozzles, Injectors, etc. for filtration.

    The installation of an AZUD System eliminates the risk of clogging of nozzles, injectors, tubes and other small openings by removing the larger particles from the liquid flow.  It also helps in decreasing scale build up in the system and the accumulation of solids settling in the collection sump.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Gravity Main Sulfide Odor Control with Hydrogen Peroxide

    Gravity main sewer systems include major trunk lines and the tributaries that feed them. Hydrogen sulfide (H2S) odor builds up in the collections system as the flows collect from upstream reaches and become larger, deeper and more septic (oxygen depleted) in the downstream reaches more near to the wastewater treatment plant. In general, most of the more significant hydrogen sulfide odor and corrosion control problems occur in the major trunk systems segments conveying flow to the plant. Therefore, selection of sulfide treatment for gravity systems has several options depending mainly on: Duration of control required Degree of septicity (oxygen depletion) Location of target control points or "hot spots" Location of available dosing points upstream of "hot spots" Availability of civil infrastructure and utilities Sensitivity to hazardous chemicals

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you