Only show results available in Virginia? Ok

wastewater compliance Applications

  • Premium

    Flow monitoring for quarry dewatering compliance

    A Greyline AVFM Area-Velocity Flow Meter monitors and data logs water discharged from the Bray Quarry to the South Raisin River. The Quarry is required to measure flow for environmental permit compliance.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    EH&S Regulatory Compliance Management for Utilities Industry

    Utilities are under tremendous pressure, receiving intense regulatory, legislative and public scrutiny to modernize their infrastructure, update transmission lines and equipment, and reform energy regulations. Beyond regulatory compliance, the utility industry is known for its focus on safety. With many utility companies under significant pressure from forced downsizing due to cost pressure, mergers and acquisitions, and de-regulation, it is becoming more difficult for overburdened EH&S staff, faced with fewer resources and an increase in regulatory requirements, to adequately focus on all of the EH&S functions.

    By 3E Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Online Monitoring for the Wastewater Treatment Industry

    AppliTek`s large portfolio of on-line analyzers enables you to monitor precisely the complete treatment process, from influent to effluent. Compliance with discharge regulations is another application example and typically expressed as sum parameters, for which AppliTek has unique solutions.

    For more information, please check the detailed section in this website on these topics:

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Water quality monitoring for municipal wastewater industry

    Real Tech’s analyzers can be used in municipal wastewater treatment applications to ensure environmental compliance and to increase process efficiency by continuously monitoring the incoming loads and making process adjustments accordingly to optimize aeration rates, and nutrient and chemical dosing.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Wastewater solutions for municipal sewer control

    Problem: A significant portion of the operational costs of a conventional municipal wastewater treatment plant employing an aerobic biological treatment unit comes from electricity costs associated with aeration. In many cases, the aeration rates are kept at the maximum level to ensure that the plant’s effluent is in compliance with the regulations. The critical parameter for regulatory purposes and treatment efficiency, BOD, takes 5 days to measure through standard methods providing almost no value to the plant operators in terms of adjusting aeration rates and chemical dosing.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Industrial solutions for water reuse optimization

    Problem: With rising water costs, greater water scarcities and increasing environmental compliance regulations, reuse of water is becoming widely practiced in the manufacturing industry. For most industries, some form of treatment is required to ensure water meets standards for reuse.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Wastewater Treatment Solutions for Textile Industry

    The Textile industry is a water intensive industry. Rising water costs due to increasing water scarcity and more stringent environmental regulations have lead to textile companies globally to seek advanced, innovative and efficient textile wastewater treatment solutions to assist them to reduce their water footprint, decrease operational cost and maintain regulatory compliance. Therefore, sustainable water quality management and conservation through water reuse strategies are increasingly becoming critical to the entire operations of a textile manufacturer.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Process Design

    Custom water and wastewater engineering, consulting and process design services to prevent air, land, water and environmental pollution. We rework systems as processes change and troubleshoot where necessary to bring systems into compliance. • High purity and process water • Biological nutrient removal • Solids treatment • Toxicity reduction • Industrial treatment • Advanced oxidation and alternative disinfection • Effluent reclamation and reuse • Land application systems • Natural treatment systems • Hydrogen sulfide and odor control • Decentralized treatment systems • Process optimization / operations assistance • Conceptual and strategic water planning

    By Yates Environmental Services based in Spokane, WASHINGTON (USA).

  • Removal of organic compounds & toxity for wastewater treatment industry

    Federal and State regulatory agencies are increasingly requiring additional water quality testing and controls of the toxicity of discharges to receiving streams. Granular Activated Carbon (GAC) helps meet these pollution regulations. If organic chemicals have been identified as contributing to discharge toxicity, Calgon Carbon Corporation can work with facilities, and their engineering firms, to help meet stringent criteria associated with their NPDES permit. GAC can be employed as a cost-effective treatment for removal of organic compounds and toxicity. Even in situations where activated sludge treatment or powdered activated carbon is used for primary wastewater treatment, post treatment with GAC may be necessary to achieve toxicity compliance.

    By Calgon Carbon Corporation based in Pittsburgh, PENNSYLVANIA (USA).

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a point scoring system to assess operators under the OMA-3 program and this will be used to identify how well a company is managing their processes and possibly identify areas for improvement. The Environmental Permitting Regulations require industry to install instrumentation (MCERTS approved where available) to report water quality. EPR compliance monitoring may include automatic water sampling, flow measurement, pH, turbidity and TOC water analysis. Industry will need to identify point of source emissions, take steps to correct inefficient control and alarm unacceptable process deviations. Although the legislation focuses on environmental improvement, good housing keeping also makes a lot of sense. Optimisation of process control minimises waste, reduces treatment costs and ultimately saves money.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Online Monitoring for the Drinking Water Industry

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards.

    On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Water Treatment and Wastewater Treatment Solutions for Food and Beverage Industry

    Food and beverage processing companies have unique challenges requiring advanced food and beverage water treatment and wastewater treatment solutions. These challenges include optimizing water efficiency and exceeding regulation compliance standards. There is typically four main water processes involved in food and beverage processing. These processes are cooling water, process water, boiler feed water and process wastewater. The typical allocation of water used in each process varies by industry, from about 60-65% for processing uses in the meat & poultry industry to about 15-20% for the sugar processing industry.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Environmental Control for the Water Utility Industry

    This section contains applications relevant for compliance, water treatment, drinking water and natural sources.

    Collecting, treating and distributing water to consumers and industry, in compliance with quality standards, means a challenging task to water companies. Both private as public water treatment entities have to manage carefully and sustainably their sources, processes and even distribution networks. AppliTek supports them not only with an extended portfolio of analyzers but also with its experience in the advice, design and construction of complete monitoring systems and stations.

    By AppliTek NV based in Nazareth, BELGIUM.

  • OneRainware™ - Radar rainfall for real-time and analytical applications.

    Accurate estimation of the spatial distribution of rainfall is critical to successfully model hydrologic processes. OneRain has worked with engineering firms and those with responsibilities in Stormwater and Wastewater Management across the U.S. to provide radar rainfall data to help characterize storm events or flow problems in collection systems and as a basis for both real-time and design-oriented modeling. OneRainware products and services offer: *Real-time gauge-adjusted radar rainfall (GARR) data *Real-time area-average rainfall *Real-time forecast rainfall *End-of-month archive quality gauge-adjusted radar rainfall data *Historical and post-event analysis using archived rainfall estimates *Web-delivered calibrated radar-rainfall data *StormProperties™ Analysis. GARR data are used in flood warning, runoff modeling, basin modeling, I/I studies, litigation, real-time control, design storms, and National Pollutant Discharge Elimination System (NPDES) compliance activities.

    By OneRain Incorporated based in Longmont, COLORADO (USA).

  • Water purification solutions for pure & clean drinking water

    Calgon Carbon`s cost-effective technologies ensure tens of millions of people drink clean, safe water every day. Proven Solutions for Safe, Pure Drinking Water. The very quality of our life depends on a reliable supply of clean drinking water. At Calgon Carbon, we are deeply involved in meeting this challenge. Offering a wide variety of options for purification, performance, and regulatory compliance, we are leading the way in helping communities address drinking water concerns. To learn more about solutions for clean drinking water.

    By Calgon Carbon Corporation based in Pittsburgh, PENNSYLVANIA (USA).

  • Water measurement systems & sensors for water quality monitoring

    Effective water quality monitoring is the key to environmental protection of watercourses and for reliable process control and wastewater treatment.  Discharge consents under EPR regulations dictate that water quality monitoring is undertaken to ensure that consented parameters are below the consented concentrations.  Traditionally this has been done using water quality sampling methods but increasingly automatic water quality measurement sensors linked to real-time telemetry is seen as the most reliable and timely means of ensuring that treatment processes are operating efficiently and that EPR compliance is maintained.

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Geosynthetic Lining for Mining Industry

    Geosynthetics are used in construction of various components of modern mining facilities, including process solution ponds, heap leach pads, stormwater containment, wastewater treatment ponds and closures. Harsh environmental conditions provide a challenge to engineers designing the projects. In addition, increasing environmental and cost pressures are requiring lining systems to achieve greater performance levels than ever. GCLs are rapidly becoming a desired component of mining liner systems because of the benefits they provide in cost effective construction, environmental compliance and process solution leak reduction. In weather-sensitive remote or high-altitude locations, GCLs offer far greater installation efficiencies than compacted clay.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you