Only show results in Virginia? Ok

wastewater discharge Applications

  • Zero Liquid Discharge wastewater solution

    Zero Liquid Discharge (ZLD) describes a process that completely eliminates liquid discharge from a system. The goal of any well-designed ZLD system is to minimize the volume of wastewater that requires treatment, process wastewater in an economically feasible manner, while also producing a clean stream suitable for reuse elsewhere in the facility. Interest in ZLD technology has grown in the industrial manufacturing sector over the past decade. Companies may begin to explore ZLD because of ever tightening wastewater disposal regulations, company mandated green initiatives, public perception of industrial impact on the environment, or concern over the quality and quantity of the water supply.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Monitoring industrial trade discharge for wastewater treatement industry

    Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform continuous water analysis for key consent parameters.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Wastewater Recycling

    TIGG’s activated carbon wastewater systems allow industry to meet environmental effluent requirements and discharge directly to POTWs or permitted surface waters. In some cases TIGG’s systems are used to recycle wastewater for non potable water applications to lessen demand on local water resources.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • Premium

    Area-velocity flowmeter for sewage lagoon discharge flow monitoring

    The Township of South Glengarry installs a new Greyline AVFM 5.0 Area-Velocity Flow Meter to measure continuous discharge from their municipal sewage lagoon. The sealed ultrasonic sensor is mounted in a horizontal 12` PVC pipe. The AVFM replaced a magnetic flowmeter that was unable to measure seasonal low flow rates.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Solutions for the wastewater sector

    Conventional wastewater treatment systems are focused on efficient removal of polluting components. This is commonly done through aeration and separation of formed biomass from the cleaned water. After treatment the water would be discharged onto surface waters or subsoil irrigation. Introduction of polishing steps after these treatment systems opened up the possibilities to reuse water for either irrigation or even potable water. DMT Environmental Technology also implements these solutions with its MemBioRex membrane bioreactor. Nowadays novel technologies enable reuse of saline water within industries such as unconventional oil and gas, industry, agriculture, and mining. DMT Water Technology develops and realises innovative products to enable our customers to meet these challenges.

    By DMT Global Environmental Solutions BV based in Joure (NL), NETHERLANDS.

  • Continuous Monitoring of Wastewater

    The Sorbisense method allows for efficient monitoring of the sewage system and can help reduce costs of operation and environmental impact. The method is particularly well suited for tracking the source of periodic discharges, the identification of faulty pipe connections of the measuring of values in the recipient. The method also allows for measurements in dynamic sources - such as emissions from roads, roofs, parking lots and overflow

    By SORBISENSE based in Tjele, DENMARK.

  • Premium

    Wastewater solutions for wastewater UV disinfection performance

    Problem: Prior to environmental discharge, wastewater is disinfected to ensure pathogens present in the water are inactivated. Ultraviolet (UV) disinfection is becoming a widely accepted treatment technology for wastewater disinfection due to the deleterious effects of chlorine on aquatic life. The ability for the UV light to penetrate the water is directly related to the concentration of suspended particles and organic matter in water that absorb or scatter the light.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Wastewater treatment for wineries

    During the winemaking process, it is generated a big volume of wastewater that must be adequately treated to meet the discharge requirements of public sewers of channel, or reuse as irrigation water mainly.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Towns wastewater treatment

    Towns wastewater, including water generated by domestic use, by shops, public cleaning and storm runoff, must be adequately treated to meet the discharge requirements of public channel, or reuse as irrigation water mainly.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Premium

    Water Storage for the Wastewater Industry

    Liquid waste discharged by domestic residences, commercial properties, industry, and/or agriculture. Superior Tank Co., Inc. offers a wide range of products such as Open Tops, Aeration and Trickling Filter tanks. Our engineers can create a wastewater bolted or welded steel storage tank system that will best suit your needs. We are able to package and ship our bolted and welded steel storage tanks internationally.

    By Superior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA).

  • Industrial wastewater treatment for industries

    MIOX is the lowest cost supplier of chlorine for disinfection and oxidation of wastewater prior to discharge. Mixed Oxidant Solution (MOS) chemistry is more effective at biofilm control, Biochemical and Chemical oxygen demand removal (BOD/COD), breakpoint chlorination of ammonia and hydrogen sulfide (H2S) removal.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Premium

    Utility Water Treatment

    It makes economic sense to reuse process water. Why would you discharge water just because you've used it once? If this water is treated properly, it can be reused with ease, cutting costs in no time.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Online Monitoring for the Wastewater Treatment Industry

    AppliTek`s large portfolio of on-line analyzers enables you to monitor precisely the complete treatment process, from influent to effluent. Compliance with discharge regulations is another application example and typically expressed as sum parameters, for which AppliTek has unique solutions.

    For more information, please check the detailed section in this website on these topics:

    By AppliTek NV - Environmental Analysis Division based in Nazareth, BELGIUM.

  • Premium

    Wastewater solutions for ballast water treatment monitoring

    Problem: To operate safely and efficiently, cargo ships take in water to provide stability. This water, referred to as ballast, carries all kinds of bacteria, microbes and micro-algae. The ballast water must inevitably be discharged when the ship takes on cargo, often thousands of kilometers away from the port of origin, transferring pathogens and aquatic organisms that can cause serious environmental, economic and health problems.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Wastewater solutions for the industrial effluent pollution management

    Problem: Industrial manufacturers face stringent regulations for discharging wastewater to the environment and municipal sewer systems. Biochemical Oxygen Demand (BOD) is a primary concern for many discharge limits, as wastewaters high in BOD can have adverse impacts on the aquatic environments by leading to oxygen depletion. In some cases, as a means to supplement BOD, it is also desirable to monitor chemical oxygen demand (COD) of industrial effluents. Both of these tests, are time and labour intensive reducing the frequency at which they can be measured for a given effluent.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Wastewater Testing for the the Water Treatment Industry

    There is strict regulation surrounding waste water discharge so it’s very important to conduct waste water testing in waste water environments. Aquatic ecosystems are sensitive to even small changes in the chemical make up of the water, temperature, etc. Water parameter testing before discharge allows any pollutants to be detected and prevented from entering the watercourse. Real time testing allows quick action and minimises the risk of any potential fines that might be imposed by regulatory bodies should there be any regulatory violations. The rugged AP-2000 protects the electrodes during deployment and allows all the essential parameters to be tested while it’s portable design means that the device can be easily carried between locations. You can also save money on site visits by using telemetry.

    By AQUAREAD Limited based in Broadstairs, UNITED KINGDOM.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you