Only show results available in Virginia? Ok

wastewater mixing Applications

  • Premium

    Aeration and thorough mixing for lagoon optimization

    Lagoon SolutionsWith thousands of installations worldwide, Aeration Industries provides lagoon solutions that are built on the experience and expertise that comes from more than 40 years of experience in wastewater treatment. Whether it’s industrial wastewater treatment requiring thorough mixing and high oxygen transfer efficiency, or a municipal wastewater treatment system requiring efficient and effective treatment; Aeration Industries will design a solution to optimize your current lagoon.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Equalization basins for aeration and mixing

    Whether you have in-line or off-line equalization basins or lagoons with a large surface area or small deep tank; our flexibility can help you create a solution to fit your needs. We can help you minimize flow and/or loading spikes by providing mixing with or without aeration to allow your downstream treatment facility to run smoothly. We have years of experience and can provide you with trusted solutions.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for aerobic digester

    Powered by the Aire-O2Triton® Process Aerator/Mixer. Municipal and industrial aerobic digesters are an ideal application for the Aire-O2 Triton process aerator/mixer. The surface-mounted, minimal maintenance Triton provides superior aeration and mixing in solids of up to 4% and depths to 33 feet. Aeration Industries’ Aerobic Digester solution offers substantial capital and operational savings, as well as improved process flexibility. Multiple mounting options are available to best fit your needs.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for fog removal

    Ideal for industrial applications, our Aire-O2 Microfloat Dispersed Air Flotation (DAF) System is an effective, affordable and reliable physical/chemical pre-treatment technology for removing up to 90% of fats, oil, and grease, 60% of total suspended solids, and 30% of Biochemical Oxygen Demand – all at a much lower cost than traditional DAF systems.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for mining wastewater treatment

    Optimize Mine Production. We understand that you are facing increased regulations and mining operations continuously deal with challenges presented by harsh and dangerous conditions. Wastewater treatment to meet regulatory and social demands only compounds those challenges. Aeration Industries International can limit the time and effort you spend on wastewater treatment, allowing you to focus on what matters most… production.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Regenerative blowers

    Regenerative blowers for waste water aeration. Rotary lobe blowers for waste water aeration.

    By Air Power Products Limited based in Cambridge, ONTARIO (CANADA).

  • Premium

    Agitation and mixing solutions for water and wastewater treatment.

    Municipal water treatment facilities utilize continuous mixing to process drinking water for municipalities.  There are a variety of drinking water sources and therefore different processing steps for the water.  Processes utilize rotating and static mixing to treat the water for human consumption.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Premium

    Aeration and mixing technologies for municipal wastewater treatment

    Municipalities of every size are subject to public and governmental scrutiny of their municipal wastewater treatment efficacy. As effluent water quality regulations become increasingly stringent, Aeration Industries partners with municipalities to develop economical, environmentally friendly, and sustainable wastewater treatment solutions; customized for each unique environment.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Air control for wastewater treatment aeration

    Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity`s sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result, large compressors are used to force air through hundreds of air diffusion filters at the bottom of the aeration basins, providing a constant 24/7 supply of oxygen to the micro-organisms in the water.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Aeration and mixing technologies for oil and gas wastewater treatment

    As more hydraulic fracturing wells come into operation, the stress on surface water and groundwater supply increases. The expanding volume of wastewater created needs to be captured, disposed of, or recycled in an environmentally sustainable manner so the EPA continues to increase regulations.  We will work with you to create a comprehensive solution to treat your wastewater, meet increasingly strict governmental regulations, and support long term water life cycle management.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for activated sludge systems

    The activated sludge process uses a mass of organisms to aerobically treat wastewater and is used to remove biodegradable organics from both municipal and industrial wastewaters.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Acid Eddy Chemical Dilution Trough

    By Global Treat, Inc based in Spring, TEXAS (USA).

  • Electrical Based Tomography Systems for Batch mixing

    Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing). Alternatively, an array of up to 8 circular planes, each with 16 electrodes can be used to provide a more complete picture of the mixing process.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Industrial mixing for the water treatment industry

    The Veenstra Group is a true specialist in manufacturing mixers for the water handling industries.

    By Veenstra Group based in Coevorden, NETHERLANDS.

  • Premium

    Aeration and mixing technologies for food and beverage wastewater treatment

    Eliminate the risk of downtime: We understand how important water is in food and beverage manufacturing. We have been serving the food and beverage industry for many years and know how difficult it is to meet tightening FDA and EPA requirements, while still meeting your production schedule.  We offer customized food and beverage wastewater treatment solutions that support sustainable operations, reduces total cost of ownership, and keeps you in compliance… giving you the assurance you need so you can focus on quality production.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for landfill leachate wastewater treatment

    Flexible equipment and reliable partners for evolving landfill leachate conditions. Aeration Industries understands the unpredictable nature of landfill leachate wastewater treatment due to seasonality and facility aging. We also understand how punishing leachate can be to wastewater equipment. The equipment and solutions we offer will provide the flexibility and reliability to match your operational challenges in landfill leachate wastewater treatment systems.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you