Only show results in Virginia? Ok

wastewater monitoring Applications

  • Premium

    Wastewater flow monitoring

    By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA).

  • Continuous Monitoring of Wastewater

    The Sorbisense method allows for efficient monitoring of the sewage system and can help reduce costs of operation and environmental impact. The method is particularly well suited for tracking the source of periodic discharges, the identification of faulty pipe connections of the measuring of values in the recipient. The method also allows for measurements in dynamic sources - such as emissions from roads, roofs, parking lots and overflow

    By Sorbisense A/S based in Tjele, DENMARK.

  • Turbidity Monitoring

    The monitoring of Turbidity is key requirement of the water industry in both water supply and water recovery systems. Within the water supply process, monitoring of turbidity allows operators to assess the efficiency of filters for particulate removal through the process. Similarly, with water recovery (Waste Water Treatment Works), the measurement of turbidity is a key parameter to track the removal of particulate through the process. CTG can provide turbidity measurements with the UniLux sensor, or provides...

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Monitoring Oil and Grease in Wastewater

    Real time information speeds processing and saves time in the treatment of water and wastewater. Get a measurement in a few minutes extracting oil from water using S-316 extraction solvent and measuring the oil content using a Model OCMA-550 NDIR analyze

    By HORIBA Europe GmbH based in Leichlingen, GERMANY.

  • Premium

    Monitoring petroleum hydrocarbons in wastewater

    The economic advantage of continuous discharge could only be achieved at this location by meeting strict discharge limits for the level of hydrocarbons present in the discharged water. Local ordinances required continuous monitoring for continuous discharge of the company’s treated wastewater.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Monitoring of phenol in water

    A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Oil in Water Monitoring

    Detection of hydrocarbons within both water sources and effluent intake to Waste Water Treatment Works is an increasing requirement. The UviLux Hydrocarbon fluorometer detects hydrocarbons in water at very low concentrations. This in-situ fluorometer provides a rugged sensor which can be deployed in a wide variety of configurations. The UviLux is part of the Lux range of CTG fluorometers, and can be provided with a number of options with regard to signal protocols, and has available accessories to enable...

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Monitoring of hydrocarbons in bilge water

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Remote monitoring stations

    The Water Survey of Canada, a division of Environment Canada, is a federal government agency responsible for collection, interpretation and dissemination of water source data and information. As a division of Environment Canada, the Water Survey of Canada (WSC) covers a vast range of topographical environs from Arctic Canada to the US border with elevations varying from sea level to over 13,000 feet (4,000 metres). An estimated 7% of the world’s renewable water supplies are found in Canada. Canada’s hydrology is...

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Premium

    Monitoring of fuels in stormwater

    A major pipeline company has large storage tank farms throughout the Western States. The pipeline company transports, stores, blends additives, and distributes gasoline, diesel, and jet fuel to retail service stations and airports. Due to the quantity and movement of fuel at these facilities, there is always the potential for fuel spills.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Water monitoring technology for coastal & estuary

    Measurement of water quality in coastal regions and estuaries is critical in the characterization of hypoxic ‘dead zones’ as a result of nutrient loading and algal blooms in the water bodies. Sediment loading analysis through turbidity measurement is also important for coastal trend identification and modeling. Hydrolab and Sea-bird Coastal offer a variety of multiparameter water quality instrumentation and nutrient sensors for long-term coastal applications.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Water monitoring technology for flood warning

    Flood warning systems built into hydrological stations are used to notify local emergency authorities in the case of a flood event.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Water monitoring technology for surface water

    Measuring water quantity and quality in surface water (open channels, rivers, reservoirs, lakes, and estuaries) is one of the foundations of hydrological monitoring and has been a focus of OTT Hydromet since its first  water current meters were designed in 1875.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Water monitoring technology for flow & discharge

    Measuring water flow and discharge to determine the amount of water flowing through an open channel is critical for predicting water availability and flood events, allocating watering, and more.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Wastewater monitoring for water treatment

    All of our systems are ready to use for Water and Wastewater management right out of the box. Backed by 24/7 support and over a decade of development and experience, our solution is generally 50% lower in capital expenses and up to 40% lower in life cycle cost than most offerings on the market. We offer a highly reliable system and a customized experience that will lower your control and monitoring costs.

    By Atookoo inc. based in Sherbrooke, QUEBEC (CANADA).

  • Water quality monitoring for municipal wastewater industry

    Real Tech’s analyzers can be used in municipal wastewater treatment applications to ensure environmental compliance and to increase process efficiency by continuously monitoring the incoming loads and making process adjustments accordingly to optimize aeration rates, and nutrient and chemical dosing.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Final effluent monitoring for wastewater treatment industry

    Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Mercury monitoring for ocean cruises

    Researchers at Battelle Pacific Northwest Laboratory used a Tekran 2600 on a 2009 ship cruise. Due to the low levels of mercury in water, Tekran provided them with a custom 2600 Event Table to pre-concentrate mercury from multiple samples to push the detection limit lower. When planning an ocean bound cruise, instrument dependability is a paramount concern. At sea, there is no possibility to return instrumentation to the manufacturer for quick repair. The Tekran 2600 has a well deserved reputation for dependabil...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you