Only show results available in Virginia? Ok

wastewater monitoring technology Applications

  • Premium

    Water monitoring technology for flow & discharge

    Measuring water flow and discharge to determine the amount of water flowing through an open channel is critical for predicting water availability and flood events, allocating watering, and more.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Water monitoring technology for flood warning

    Flood warning systems built into hydrological stations are used to notify local emergency authorities in the case of a flood event.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Water monitoring technology for coastal & estuary

    Measurement of water quality in coastal regions and estuaries is critical in the characterization of hypoxic ‘dead zones’ as a result of nutrient loading and algal blooms in the water bodies. Sediment loading analysis through turbidity measurement is also important for coastal trend identification and modeling. Hydrolab and Sea-bird Coastal offer a variety of multiparameter water quality instrumentation and nutrient sensors for long-term coastal applications.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Water monitoring technology for surface water

    Measuring water quantity and quality in surface water (open channels, rivers, reservoirs, lakes, and estuaries) is one of the foundations of hydrological monitoring and has been a focus of OTT Hydromet since its first  water current meters were designed in 1875.

    By OTT HydroMet based in Kempten, GERMANY.

  • Inspection, Monitoring and Management Technologies for Wastewater Force Main Management

    Managing wastewater force mains has historically been difficult for owners. Traditional inspection methods applied in gravity main assessment are not applicable in force mains. Given the high consequence of a force main failure, the need for an innovative approach to managing these challenging pipeline assets is necessary to minimize environmental impact and comply with regulatory requirements.

    By Pure Technologies - a Xylem brand based in Calgary, ALBERTA (CANADA).

  • Distributed Temperature Sensing Technology for Stream Monitoring

    Temperature is an important factor in streams ecosystems. Heat tracers have been used to characterize contaminant transport, infiltration rates and energy exchange with groundwater, the atmosphere and radiation. The dynamics of these complicated water bodies is also affected by seasonal and diurnal patterns making characterization particularly challenging. Utilizing temperature measurements that capture spatial and temporal variations at stream ecosystem interfaces provides a mechanism for detailed characterizat...

    By Silixa Ltd based in Elstree, UNITED KINGDOM.

  • Inspection, Monitoring and Management Technologies for Water Transmission Main Management

    Water transmission mains are buried underground, and therefore often managed using a buried and forgotten approach. However, they are typically the most valuable group of assets utility owns.

    By Pure Technologies - a Xylem brand based in Calgary, ALBERTA (CANADA).

  • Water Monitoring and Flow Measurement Systems for Hydrology

    In recent years acoustic flow measurement and flow metering has established itself as the standard method for measurement in many hydrological stations but is also used as the basis for various applications, for example for flood protection and flood forecasting. Ultrasonic flow meters are also used in hydro-engineering constructions. With this almost contact free technology data can be recorded continuously and it provides 24/7 monitoring. Such flow monitoring is particularly important in waterways used...

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Water Monitor for Remote, Real-Time Monitoring and Logging of Water Levels

    Based on the wireless radar technology SenZ2 provides a complete solution for remote, real-time monitoring and logging of water levels. For the water sector real-time insights in water levels is key. Accurate level-measurement data can result in improved policy, reduction of risks and direct cost savings. The Wireless Level Radar (WLR05-2G/001) can monitor waste water and overflow, surface water and groundwater in remote places without any power source. With radar as the most reliable and cost-effective level...

    By SenZ2 BV based in NETHERLANDS.

  • Premium

    Online monitoring solutions for the drinking water industries

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards. On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Oxidative solutions for the electrolysed water

    The chemistry underpinning electrolysed water (EW) has been known for centuries, in fact demonstrations were performed in the first decade of the 19th century at the Royal Society by Nicholson, Carlise and Davy.  The first large scale application of electrochemical disinfection occurred a century later when the technology was used on a large scale for disinfecting drinking water. Electrolysed Water is produced by inducing an over-potential in a saline solution. This is similar in principle to the storage...

    By Ozo Innovations based in Kidlington, UNITED KINGDOM.

  • Chemical Oxygen Demand (COD) Analyzer for Industrial & Municipal Wastewater Industry

    MANTECH’s game-changing water quality analysis technology is revolutionizing wastewater treatment at industrial and municipal facilities worldwide. The PeCOD Analyzer provides accurate chemical oxygen demand (COD) results and biochemical oxygen demand (BOD) estimates within minutes rather than the hours or days required for standard COD and BOD testing — without the use of dichromate, mercury, acids and other harmful chemicals.

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Monitoring Sewage Flow

    Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to...

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer...

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Protecting of Drinking Water Infrastructure

    Water abstraction points may be affected by spills from farms or factories, and deliberate contamination. Early warning monitoring systems are required to alert operators to these contaminants and to changes in key water quality parameters. A timely response is necessary to prevent contamination and disruption of the public water supply.

    Chelsea Technologies Group has developed FastGuard to observe the natural trends in water quality parameters and rapidly detect and report anomalies.



    ...

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Dye Tracing

    Monitoring the dilution and movement of a tracer introduced into the water column provides an excellent means of determining the path that may be followed by a discharge and the rate at which dilution is likely to take place. Fluorescent dyes such as Rhodamine, Fluorescein or Agma are the most frequently used tracers for such investigations. Chelsea Technologies has been providing dye tracing systems for over 30 years. Typical applications include sub-sea pipeline leak detection, pollution studies, natural water...

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • QUA - Industrial Water Filtration

    QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your...

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Monitoring of VOCs in Porewater

    Monitoring VOCs in porewater in the unsaturated zone is now possible.

    Sorbisense regularly offers new options for using the patented Sorbicell, which is used to monitor surface water, wastewater and groundwater.

    The latest is almost as “ground-breaking” as the SorbiCell itself. Until now it has been difficult, if not impossible, to directly monitor for volatile substances in pore water in the unsaturated zone. But the environmental consultancy firm Ejlskov A/S in Aarhus combined the use of...

    By Sorbisense A/S based in Tjele, DENMARK.

  • Chemical Oxygen Demand (COD) Analyzer for Cleaner and Safer Drinking Water

    MANTECH’s chemical oxygen demand (COD) analyzer is breaking new ground in the science of monitoring source and treated drinking water. In addition to providing 15-minute COD results and biochemical oxygen demand (BOD) estimates, MANTECH’s PeCOD® Analyzer measures natural organic matter (NOM) in raw and treated drinking water. The NOM Analyzer™  — which is the drinking-water application of MANTECH’s novel PeCOD® COD-testing system — does what no other...

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you