Only show results available in Virginia? Ok

wastewater process control Applications

  • Premium

    Industrial solutions for process water control

    Problem: Water is fundamental for numerous manufacturing processes. Contaminated or poor quality process water can cause significant operational problems and compromise the quality of the product.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Algae control

    Excessive algae growth can throw even the best water treatment processes out of balance. Algae can clog intake screens, fluctuate pH levels, increase chlorine demand, and negatively affect the taste and smell of water. By blocking sunlight within water treatment tanks, you can stop algae growth, reduce chemical usage, and minimize the formation of disinfectant by-products (DBPs). Temperature is better controlled and maintenance associated with algae cleaning is simplified. The results? Better water treatment and lower operating costs.

    By Geomembrane Technologies Inc. (GTI) based in Fredericton, NEW BRUNSWICK (CANADA).

  • Energy reduction and coagulation process control for wastewater treatment industry

    One of the biggest costs for water-water treatment is energy consumption; the cost of which is likely to escalate with increased demand. Ineffective process control may not only be costly but environmentally impacts though the inefficient use of an un-renewable resource. Furthermore, poor process control in one area may also impinge on neighbouring processes ultimately affecting effluent water quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Process Analytics - Wastewater Applications

    Control of wastewater is increasingly becoming important to avoid potential environmental and increasing legal consequences. Accurate pH, O2, conductivity and turbidity measurements are critical in modern wastewater treatment. METTLER TOLEDO offers reliable, cost-effective solutions to control industrial effluents.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Process Design

    Custom water and wastewater engineering, consulting and process design services to prevent air, land, water and environmental pollution. We rework systems as processes change and troubleshoot where necessary to bring systems into compliance. • High purity and process water • Biological nutrient removal • Solids treatment • Toxicity reduction • Industrial treatment • Advanced oxidation and alternative disinfection • Effluent reclamation and reuse • Land application systems • Natural treatment systems • Hydrogen sulfide and odor control • Decentralized treatment systems • Process optimization / operations assistance • Conceptual and strategic water planning

    By Yates Environmental Services based in Spokane, WASHINGTON (USA).

  • Premium

    Odor Control for Food Processing

    Safely Eliminate Odors Created By Food Processing

    Malodors generated by the food processing industry vary enormously since they can be generated in the production, processing, and wastewater treatment areas of the plant. Regardless of the source, all of these odors may be offensive to the public.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Air control for wastewater treatment aeration

    Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity`s sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result, large compressors are used to force air through hundreds of air diffusion filters at the bottom of the aeration basins, providing a constant 24/7 supply of oxygen to the micro-organisms in the water.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Trapped Key Interlocks for Flow Control

    KIRK Eagle Series valve interlock systems can be implemented within many industries in which managing the flow of materials and products is critical.  Valve interlocks can aid in minimizing loss of product, preventing materials from mixing that may cause hazardous results,  and promoting flow control process safety that protects your personnel and equipment. The specific flow control applications below can be designed to meet the unique needs of every customer and can be added to an existing KIRK trapped key interlock system.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Waste water respirometry solutions for process optimisation

    Respiration rate of activated sludge has been recognised as a key controlling element in the modelling of process control, by the International Water Association Task Group. Actual respiration rate of the sludge in the aeration tanks, as well as the endogenous and maximum respiration rates are variables that indicate the rate of BOD removal and aeration requirements. The maximum respiration rate is also closely linked to the Critical Oxygen Concentration point, that is, the point at which diffusion over the bacterial cell walls ceases and therefore biodegradation is significantly compromised.

    By Strathkelvin Instruments Ltd. based in Motherwell, UNITED KINGDOM.

  • Industrial wastewater treatment

    Your customized wastewater treatment system – based on the VACUDEST Modular-System An integral part of H2O´s philosophy is the development of customized system solutions. Every industrial wastewater is different. The varity of applications requires a customized wastewater treatment system. Thus we don't have the VACUDEST wastewater treatment system "off the shelf". To ensure that a customized solution is affordable for our customers we developed the VACUDEST Modular-System. Continuous innovation for more cost efficiency We continuously improve our high quality VACUDEST wastewater treatment systems. We have made it our obligation to create genuine benefits through innovation: Self-cleaning heat exchangers, low maintenance systems and a reliable machine control system guarantee reliable processes. As a result, you receive a crystal clear distillate which meets the highest standards. The top quality, efficient and environment friendly VACUDEST vacuum distillation systems are the ri

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    algae control in drinking water plants

    By controlling algae, cyanobacteria and fouling LG Sonic can efficiently reduce taste and odor problems in a treatment plant. The performance of a drinking water treatment plant is consistent with the amount ol contamination in the water. Growth of algae and other fouling in and before a treatment plant can cause various problems within the process. In general, these issues are related with taste or odor of the water. Growth of algae, cyanobacteria and bacteria within the basins of the plant itself, increase the demand of chemicals or filtration and in turn creating problems with THM (trihalomethane) formation. Other common issues are growth of toxin and geosmin producing cyanobacteria (blue-green algae) within the intake reservoir or dam. These molecules give the water an unpleasant `earthy ` taste.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Environmental Control for the Water Utility Industry

    This section contains applications relevant for compliance, water treatment, drinking water and natural sources.

    Collecting, treating and distributing water to consumers and industry, in compliance with quality standards, means a challenging task to water companies. Both private as public water treatment entities have to manage carefully and sustainably their sources, processes and even distribution networks. AppliTek supports them not only with an extended portfolio of analyzers but also with its experience in the advice, design and construction of complete monitoring systems and stations.

    By AppliTek NV - Environmental Analysis Division based in Nazareth, BELGIUM.

  • Erosion & sediment control solutions for water remediation

    `Water should never be treated as a nonrenewable resource; it should always be treated with the respect it deserves as the foundation of life on the planet.` Most water on earth is in a continuous cycle between water bodies, land and the atmosphere. An important component of smart water solutions is the cycling of water treatment solutions using processes by which water enters, moves through and exits soil are essential for sustaining plants and soil organisms, transporting nutrients and recharging surface and ground water supplies. Water moving in soil also impacts the behavior and transport of soil solutes and their effect on water quality.

    By Erosion Control Forum based in Bend, OREGON (USA).

  • Air pollution control for the liquid waste treatment industry

    Companies requiring treatment of any waste-water emitted by a manufacturing process – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Real-time Control System for Wastewater Treatment Plants

    Wastewater treatment plants (WWTP) are subject to large variation in flow and load, not to speak of uncertainties on the composition of the incoming wastewater. On top of that, the activated sludge treatment process, as used by the vast majority of treatment plants, is difficult to control due to the complex behaviour of the biological process. Nevertheless WWTPs are run 24/7, with operators and management challenged to meet ever tightening environmental regulations.

    In order to meet the operational demands of modern-day plants, a new control system was developed. Proprietary control algorithms were introduced based on a large set of data from nutrient measurements in various WWTPs. The customer`s benefits are twofold: (1) achieving optimum effuent quality and, at th same time, (2) lowering energy needs and dosing of commidity chemicals.

    By AppliTek NV - Environmental Analysis Division based in Nazareth, BELGIUM.

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a point scoring system to assess operators under the OMA-3 program and this will be used to identify how well a company is managing their processes and possibly identify areas for improvement. The Environmental Permitting Regulations require industry to install instrumentation (MCERTS approved where available) to report water quality. EPR compliance monitoring may include automatic water sampling, flow measurement, pH, turbidity and TOC water analysis. Industry will need to identify point of source emissions, take steps to correct inefficient control and alarm unacceptable process deviations. Although the legislation focuses on environmental improvement, good housing keeping also makes a lot of sense. Optimisation of process control minimises waste, reduces treatment costs and ultimately saves money.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Ozone/UV systems for Industrial, municipal, and residential wastewater treatment

    In 2004-2005 LIFETECH`s laboratory worked out an advanced oxidation process (AOP) for removal of dioxins and furans (PCDD/F), chlorophenols and other contaminants from the BCD process wastewater. Consequently, our technology was installed and from April 2006 successfully used in the `Spolana-Dioxins` Project at SPOLANA a.s. in Neratovice, Czech Republic, as a part of Special Wastewater Treatment Plant. Our supply consisted of an ozone generator with the output of 5 kg O3/h at 10% w/w ozone concentration, two reaction tanks with mixing systems, a vent ozone destructor, and a control system. The world largest project for removal of PCDD/F was managed by BCD CZ a.s., a subsidiary of Thermal and Chemical Soil Remediation Ltd.

    By Lifetech based in Brno, CZECH REPUBLIC.

  • Premium

    Online Monitoring for the Demi-Water Production Industry

    Demineralization is the process of removing mineral salts as well as organic impurities from water by means of ion-exchange and can be found in various industries such as the chemical, food & beverage, irrigation and filtration industries. The consuming side of the industry relies on ever increasing quality and availability of demi-water while the manufacturers have to balance cost/output. AppliTek provides high quality analytical tools to increase process efficiency and quality control. Continuous measurements with high accuracy are carried out on the critical QC/QA parameters of the deionizing process:

    • Silica
    • Low sodium
    • Total Organic Carbon

    By AppliTek NV - Environmental Analysis Division based in Nazareth, BELGIUM.

  • Drinking water analysis for municipalities

    GE Analytical Instruments offers several Sievers TOC Analyzer models designed specifically to simplify monitoring of drinking water treatment plants. Always knowing the TOC levels throughout a water treatment plant, and improving TOC reduction, can help a plant not only control DBPs, but also implement efficient and potentially cost saving treatment processes.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you