Only show results available in Virginia? Ok

wastewater recycling Applications

  • Wastewater Recycling

    TIGG’s activated carbon wastewater systems allow industry to meet environmental effluent requirements and discharge directly to POTWs or permitted surface waters. In some cases TIGG’s systems are used to recycle wastewater for non potable water applications to lessen demand on local water resources.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • Premium

    Recycling of plastic waste

    Recyclable plastics can come from a large range of sources. Shredder residues containing plastics are typically coming from small domestic appliances, electrical and electronic equipment and cars. These materials each have their own difficulties when they have to be processed to recover clean plastics. With the GRS equipment we are able to handle each type of these materials.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    Recycling and processing of WEEE

    Next to processing shredder light and heavy shredder fraction the Ad Rem machinery is also capable of processing waste of electrical and electronic equipment. WEEE can be processed on the same machinery as ASR is processed without any modifications. This makes it possible to get more input into the system and therefore costing less per ton.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Water Recycling / Water Reuse

    QUA is a leading-edge developer and manufacturer of advanced membrane products. These are engineered with innovative technologies, which are used to treat challenging waters. QUA is leveraging its deep roots in R&D, the expertise of staff that is highly experienced in water treatment technologies to become a global technology leader in the development of products for water and wastewater treatment applications.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Biological wastewater processes for pulp and paper industries

    Wastewater treatment processes considered for this industry must address industry specific nuances like slug discharges of pulp, stormwater runoff and air emissions for compounds such as total reduced sulfur (TRS)

    By Biowater Technology based in Cumberland, RHODE ISLAND (USA).

  • Water Recycling / Water Reuse

    QUA is a leading-edge developer and manufacturer of advanced membrane products. These are engineered with innovative technologies, which are used to treat challenging waters. QUA is leveraging its deep roots in the expertise of staff that is highly experienced in water treatment technologies to become a global technology leader in the development of products for water and wastewater treatment applications.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Wastewater Pretreatment Solutions for Hazardous Waste Site Remediation

    Groundwater Remediation, Superfund Sites, Suspended and/or Settleable Solids Removal, Metals Removal and Process Water.

    By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA).

  • Automated solutions for the municipal sludge recycling using dredges

    LWT`s dredging systems can be used for municipal sludge recycling applications. Sludge is mixed with compost and used in nurseries, sod farms, and agricultural applications.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Premium

    Wastewater treatment for the paper industry

    Separation of the paper pulp in the recycling process of the waste water, and recuperation and recirculation of the residual currents.

    By Toro Equipment S.L. based in La Cistérniga, SPAIN.

  • Wastewater treatment for the food industry

    Companies in the food industry need large amounts of water – as an ingredient of their products, but also – in large amounts – for the production process and for the cleaning of raw materials, machines and equipment. Water cleans, washes and is processed. Using this essential resource carefully helps to reduce costs. The biological wastewater treatment process by DAS Environmental Expert enables companies to recycle usage water and therefore lower overall consumption.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Premium

    Aeration and mixing technologies for oil and gas wastewater treatment

    As more hydraulic fracturing wells come into operation, the stress on surface water and groundwater supply increases. The expanding volume of wastewater created needs to be captured, disposed of, or recycled in an environmentally sustainable manner so the EPA continues to increase regulations.  We will work with you to create a comprehensive solution to treat your wastewater, meet increasingly strict governmental regulations, and support long term water life cycle management.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Water treatment chemicals for the steel and coke industry

    The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for waste water remain unchanged, resulting in an increased demand for professional water treatment.

    By Kurita based in Ludwigshafen, GERMANY.

  • Waste water Treatment

    Waste water Treatment, Water Recycling

    By HPI Processes, Inc. based in Telford, PENNSYLVANIA (USA).

  • Premium

    Chemical Filtration in Water for the Environmental Protection / Waste Water Technology

    In waste water treatment systems our membranes are used with great success for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Dewatering applications for screw presses in pulp and paper mills

    Stock Thickening: Between Primary and Secondary Refining Stage. Between Secondary and Tertiary Refining Stage. In Front on High-Density Stock Chest. In Front of Dispersion Systems in Recycle Mills. Pulp Washing for Pine Tar and Chemical Removal.

    By Press Technology & Mfg., Inc. based in Springfield, OHIO (USA).

  • Aquatech Oil Sands-Produced Water Treatment

    For most oil sand recovery is accomplished with in-situ thermal processes like Steam Assisted Gravity Drainage (SAGD) and Cyclic Steam Stimulation (CSS), where steam and chemicals are injected to the liquefy the bitumen. The treatment and recycling of the produced water used in this process has a direct impact on the cost of oil production. Aquatech provides water treatment technologies that includes the recycling of the produced water used the process which has a direct impact on their the cost of oil production.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • CeraQ - Ceramic Membrane Modules

    QUA’s CeraQ ceramic membrane modules are designed for challenging water and wastewater applications. The CeraQ modules consist of 3.5 mm ID ceramic tubular elements potted into bundles for various surface area requirements. The module is capable of removing virus, bacteria, colloidal matter, submicron or micron sized suspended particles, oil and organics from a wide range of fluids, including drinking water and industrial wastewater to economically meet variety of treatment objectives or to recycle and reuse wastewater. One of CeraQ's applications is that drinking water filtration for removal of bacteria/virus. achieves 10-log bacteria and 4-log virus removal.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Filamentous Bulking Control with Hydrogen Peroxide

    Basis of Control with Hydrogen Peroxide Hydrogen peroxide may be used to correct a serious filamentous bulking situation or, preferably, to prevent one from occurring until adjustments can be made to remove the cause. When applied to the return activated sludge, hydrogen peroxide supplies dissolved oxygen which helps restore the microbial activity necessary for effective operation, while selectively oxidizing the filaments which retard settling. The effective dose of hydrogen peroxide is a function of time and concentration, and varies from plant to plant. To correct a serious bulking problem, immediate results may be obtained by adding 100 - 200 mg/L H2O2 to the biosolids recycle line. Once control of bulking is obtained, the dose may be reduced to 25 - 50 mg/L H2O2 to prevent re-occurrence. Practical Considerations Filamentous bulking of municipal activated sludge is not a normal occurrence, and suggests more fundamental problems may be at work (e.g., low dissolved oxygen, high sulfide input, heavy organic loading, nutrient imbalance, improper sludge age, or rapid changes in influent characteristics). Consequently, the use of chemicals such as hydrogen peroxide to control bulking should be pursued in concurrently with more fundamental corrective measures.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Industrial water Copper removal and recovery

    Pure copper is soft and malleable; a freshly exposed surface has a reddish-orange color. It is used as a conductor of heat and electricity, a building material, and a constituent of various metal alloys. Recycling is a major source of copper in the modern world. A combination of economic and regulatory factors are now at work to make metal recycle and water reuse very attractive.

    By PuriTech Ltd based in Herentals, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you