Only show results available in Virginia? Ok

wastewater reuse Applications

  • Water Recycling / Water Reuse

    QUA is a leading-edge developer and manufacturer of advanced membrane products. These are engineered with innovative technologies, which are used to treat challenging waters. QUA is leveraging its deep roots in R&D, the expertise of staff that is highly experienced in water treatment technologies to become a global technology leader in the development of products for water and wastewater treatment applications.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Industrial solutions for water reuse optimization

    Problem: With rising water costs, greater water scarcities and increasing environmental compliance regulations, reuse of water is becoming widely practiced in the manufacturing industry. For most industries, some form of treatment is required to ensure water meets standards for reuse.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water Recycling / Water Reuse

    QUA is a leading-edge developer and manufacturer of advanced membrane products. These are engineered with innovative technologies, which are used to treat challenging waters. QUA is leveraging its deep roots in the expertise of staff that is highly experienced in water treatment technologies to become a global technology leader in the development of products for water and wastewater treatment applications.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Water reuse for the food industry

    Especially in the food industry large volumes of water are consumed. This process water is often discharged directly or discharged after passing a wastewater treatment station. Due to the increasing costs of (process)water companies try to reduce the water consumption mainly through reuse. An important aspect of this development is to comply with the high water quality standards.

    By Colsen International b.v. based in HULST, NETHERLANDS.

  • Premium

    Solutions for the wastewater sector

    Conventional wastewater treatment systems are focused on efficient removal of polluting components. This is commonly done through aeration and separation of formed biomass from the cleaned water. After treatment the water would be discharged onto surface waters or subsoil irrigation. Introduction of polishing steps after these treatment systems opened up the possibilities to reuse water for either irrigation or even potable water. DMT Environmental Technology also implements these solutions with its MemBioRex membrane bioreactor. Nowadays novel technologies enable reuse of saline water within industries such as unconventional oil and gas, industry, agriculture, and mining. DMT Water Technology develops and realises innovative products to enable our customers to meet these challenges.

    By DMT Global Environmental Solutions BV based in Joure (NL), NETHERLANDS.

  • Zero Liquid Discharge wastewater solution

    Zero Liquid Discharge (ZLD) describes a process that completely eliminates liquid discharge from a system. The goal of any well-designed ZLD system is to minimize the volume of wastewater that requires treatment, process wastewater in an economically feasible manner, while also producing a clean stream suitable for reuse elsewhere in the facility. Interest in ZLD technology has grown in the industrial manufacturing sector over the past decade. Companies may begin to explore ZLD because of ever tightening wastewater disposal regulations, company mandated green initiatives, public perception of industrial impact on the environment, or concern over the quality and quantity of the water supply.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Towns wastewater treatment

    Towns wastewater, including water generated by domestic use, by shops, public cleaning and storm runoff, must be adequately treated to meet the discharge requirements of public channel, or reuse as irrigation water mainly.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Premium

    Utility Water Treatment

    It makes economic sense to reuse process water. Why would you discharge water just because you've used it once? If this water is treated properly, it can be reused with ease, cutting costs in no time.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Residential Areas and Hostelries wastewater treatment

    Residential Areas and Hostelries wastewater, including water generated by domestic use, by shops, restaurants and laundries, must be adequately treated to meet the discharge requirements of public sewers or channel, or reuse as irrigation water mainly.

    This wastewater has the following characteristics:

    • Variations in flow depending on the time of day and season (mainly in tourist areas).
    • High suspended solids content.
    • Presence of oils, fats and detergents.
    • High concentration of easily biodegradable organic matter.
    • Adequate concentration of nutrients.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Municipal Wastewater treatment for drinking water

    As one of the world`s most precious natural resources, the reuse of water is becoming increasingly important. MIOX is both the most cost-effective solution and the preferred technology for disinfection and oxidation of wastewater for reuse or reintroduction into the environment. MIOX`s hypochlorite generators offer a safer, technologically superior solution to wastewater treatment, virtually eliminating many of the negative problems associated with traditional chlorine disinfection. Safer, economical and significantly more effective, MIOX is revolutionizing the process of making water safe again.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Odor control solutions for wastewater industry

    Municipal wastewater treatment plants (wwtp) provide an essential community service that is vital for the protection of public health and the environment in which we live. Without affordable wastewater services, the quality of life within a community or municipality can be drastically diminished. Most cities, towns and communities in the US and Cananda provide wastewater treatment services, unfortunately these services and plants come with many undesirable off gasses and odors. There are a number of challenges that currently face the wastewater treatment industry including, global urban population growth, more stringent discharge regulations for industries, and demand for water conservation through wastewater reuse.

    By Ecolo Odor Control Technologies based in Toronto, ONTARIO (CANADA).

  • Biological wastewater processes for mining

    The mining industry has the potential to use large amounts of wastewater in its operations. Often times these waste streams contain contaminants that require treatment before the water can be re-used or discharged. Biowater has successfully installed highly efficient biofilm treatment processes including our complete mix fixed film (CMFF®) system to remove BOD/COD, and nitrogen from mining waste streams. Biowater’s technologies, such as our CFIC® process, can produce effluent water quality that is acceptable for re-use, reducing the stress on ecosystems in water stressed areas.

    By Biowater Technology based in Cumberland, RHODE ISLAND (USA).

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Chemical Water Treatment for waste water

    Kurita develops products and solutions for the waste water treatment to improve the water quality and respect the legislation and the environment. Due to increased environmental sensitivity and today’s legislative restrictions, most industrial plants which use water already have wastewater treatment plants. The different Kurita Technologies carefully adapts to the needs of each plant through the optimization and improving the water quality and reducing your operating costs. Improve the water reuse in your facilities and work closely with our customers to reduce the discharges to a minimum level is one of our main targets.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Actuators for the water & sewage industry

    Water treatment and distribution offers significant opportunities for Rotork. With climate change affecting the availability of water in many areas of the world, there is an increasing need for processes which will maximise existing resources such as desalination plants and water re-use projects.

    By Rotork based in Bath, UNITED KINGDOM.

  • Premium

    Wastewater Treatment Solutions for Textile Industry

    The Textile industry is a water intensive industry. Rising water costs due to increasing water scarcity and more stringent environmental regulations have lead to textile companies globally to seek advanced, innovative and efficient textile wastewater treatment solutions to assist them to reduce their water footprint, decrease operational cost and maintain regulatory compliance. Therefore, sustainable water quality management and conservation through water reuse strategies are increasingly becoming critical to the entire operations of a textile manufacturer.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Food & beverage wastewater treatment

    Food Industry wastewater (Meat, Milk, Canned fruits and vegetables, Beverages, etc) must be adequately treated to meet the discharge requirements of public sewers or channel, or reuse as irrigation water mainly. These industries wastewater has the following characteristics:

    • Large variations in flow and pollutant load during harvesting.
    • High suspended solids content.
    • High concentration of easily biodegradable organic matter.
    • Absence of toxics elements.
    • Adequate concentration of nutrients.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Process Design

    Custom water and wastewater engineering, consulting and process design services to prevent air, land, water and environmental pollution. We rework systems as processes change and troubleshoot where necessary to bring systems into compliance. • High purity and process water • Biological nutrient removal • Solids treatment • Toxicity reduction • Industrial treatment • Advanced oxidation and alternative disinfection • Effluent reclamation and reuse • Land application systems • Natural treatment systems • Hydrogen sulfide and odor control • Decentralized treatment systems • Process optimization / operations assistance • Conceptual and strategic water planning

    By Yates Environmental Services based in Spokane, WASHINGTON (USA).

  • Premium

    Wastewater Treatment Management for Pharmaceutical Industry

    Pharmaceutical companies today are operating in a challenging environment. Pharmaceutical wastewater treatment management is increasingly becoming critical to the entire operations of a pharmaceutical manufacturer. These companies are facing challenges of water scarcity requiring them to look more closely at employing pharmaceutical wastewater reuse strategies for cost management. In addition, companies in this industry are faced with tighter regulatory water discharge limits.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Ultraviolet Disinfection for Waste Water

    UV has made tremendous gains in the last 25 years, and is now recognised as a primary method of disinfecting waste water. atg UV Technology have researched the waste water industry and identified a need for a range of compact closed chamber UV systems which are easy to install into a pipeline, can deal with a wide range of water qualities and offer a high output within a small foot print. Our leading compact, closed system design means municipal waste water does not need to be disinfected using open channel UV systems. Our solutions include: - 800 Watt Amalgam UV Solutions 325 Watt Amalgam UV Solutions High Output Medium Pressure Solutions Advanced Oxidation Solutions - ADVOX Waste Water Re-use (NWRI Validated) solutions

    By atg UV Technology based in Wigan, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you