Only show results in Virginia? Ok

wastewater treatment monitor Applications

  • Wastewater monitoring for water treatment

    All of our systems are ready to use for Water and Wastewater management right out of the box. Backed by 24/7 support and over a decade of development and experience, our solution is generally 50% lower in capital expenses and up to 40% lower in life cycle cost than most offerings on the market. We offer a highly reliable system and a customized experience that will lower your control and monitoring costs.

    By Atookoo inc. based in Sherbrooke, QUEBEC (CANADA).

  • Premium

    Monitoring petroleum hydrocarbons in wastewater

    The economic advantage of continuous discharge could only be achieved at this location by meeting strict discharge limits for the level of hydrocarbons present in the discharged water. Local ordinances required continuous monitoring for continuous discharge of the company’s treated wastewater.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Monitoring engineering systems for wastewater treatment industry

    Sometimes an `off the shelf` water quality monitoring product is just not available and it is necessary to engineer a complete bespoke monitoring solution. System integration demands a diverse range of abilities. PPM is experienced in designing the correct suite of instrumentation combining manufactured, distributed and factored products.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Wastewater solutions for ballast water treatment monitoring

    Problem: To operate safely and efficiently, cargo ships take in water to provide stability. This water, referred to as ballast, carries all kinds of bacteria, microbes and micro-algae. The ballast water must inevitably be discharged when the ship takes on cargo, often thousands of kilometers away from the port of origin, transferring pathogens and aquatic organisms that can cause serious environmental, economic and health problems.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Perimeter Monitoring and Area Monitoring

    GasFinder2 can be permanently installed to monitor chemical and petroleum plants for both combustible and toxic gases. GasFinder2 can be used to replace arrays of point sensors for perimeter monitoring. A single light path will replace many point sensors. With GasFinder2 perimeter monitoring, all gas dispersed from a facility is detected and logged.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Monitoring surface water for wastewater treatment industry

    Pollution Risk: Surface water encompasses storm water derived from hard standing areas, river water and reservoirs. All types of surface water are at risk from ingress of pollution and therefore need to be monitored. On-line continuous monitoring can identify and alarm pollution so corrective action can be taken

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Water intake protection monitoring for wastewater treatment industry

    Intake protection systems have been extensively installed to protect water treatment works, from ingress of polluted water and waste-water plants from toxic chemical loads. A suitable system typically comprises a suit of instrumentation, measuring key chemical, physical and indicator parameters dependant upon the identified risks, associated with the individual site activity or discharges from neighbouring industry.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Open Channel flow monitoring for wastewater treatment plant

    After 16 years of service, the Long Sault WWTP replaced two older Greyline Open Channel Flow Monitors with new data logging OCF 5.0 models. This SBR treatment plant`s influent is measured with flow through two 6` Parshall Flumes.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Final effluent monitoring for wastewater treatment industry

    Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Online monitoring solutions for the water treatment industries

    Collecting, treating and distributing water to consumers and industry, in compliance with quality standards, means a challenging task to water companies. Both private as public water treatment entities have to manage carefully and sustainably their sources, processes and even distribution networks. AppliTek supports them not only with an extended portfolio of analyzers but also with its experience in the advice, design and construction of complete monitoring systems and stations.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Clean drinking water monitoring solutions for wastewater treatment industry

    Continuous on-line monitoring can be used to alarm unacceptable deviations from established control points and to ensure quality standards are maintained.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Waste water monitoring solutions for wastewater treatment industry

    Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Water monitoring equipment for Remediation

    Understand your aquifer contamination site before and after treatment with water quality testing solutions designed to withstand even the harshest environments. Improve remediation project outcomes, accelerate site closures, and reduce total project costs with accurate, stable instruments that provide real-time monitoring.

    By In-Situ, Inc. based in Fort Collins, COLORADO (USA).

  • Premium

    Air quality and industrial gas monitoring systems for Water treatment

    Treatment for drinking water production involves the removal of contaminants from raw water to produce water that is pure enough for human consumption without any short term or long term risk of any adverse health effect. Substances that are removed during the process of drinking water treatment include suspended solids, bacteria, algae, viruses, fungi, and minerals such as iron and manganese. Ozone (O3) gas is commonly used in this contaminant removal industrial process as an effective and economical oxidizer....

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Monitoring industrial trade discharge for wastewater treatement industry

    Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Microbial Solutions for Wastewater Treatment

    Whether industrial or municipal, Microbial Discovery Groups proprietary platforms address the variety of challenges associated with wastewater treatment. Too many failures in the bioaugmentation industry stem from focusing on the product, rather than understanding and complementing wastewater systems and operations. MDG will work with you to provide customized system surveys, sampling and testing results, return on investment proposals, and regular monitoring programs specific to your end user customer. We will...

    By Microbial Discovery Group (MDG) based in Franklin, WISCONSIN (USA).

  • Precision moisture analysis instruments for Hydrogen Sulfide (H2S) monitoring for wastewater treatment

    Control nuisance odors with accurate monitoring. In wastewater treatment, nuisance odors can end up being much more than just a nuisance. Complaints about hydrogen sulfide odors can lead to citations, penalties or worse. Don’t wait for your neighbors to let you know that you have an odor problem; keep on top of hydrogen sulfide odors with a Jerome hydrogen sulfide monitoring solution.

    By AMETEK Brookfield based in Chandler, ARIZONA (USA).

  • Turbidity Monitoring

    The monitoring of Turbidity is key requirement of the water industry in both water supply and water recovery systems. Within the water supply process, monitoring of turbidity allows operators to assess the efficiency of filters for particulate removal through the process. Similarly, with water recovery (Waste Water Treatment Works), the measurement of turbidity is a key parameter to track the removal of particulate through the process. CTG can provide turbidity measurements with the UniLux sensor, or provides...

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you