Only show results available in Virginia? Ok

wastewater treatment plant monitoring Applications

  • Open Channel flow monitoring for wastewater treatment plant

    After 16 years of service, the Long Sault WWTP replaced two older Greyline Open Channel Flow Monitors with new data logging OCF 5.0 models. This SBR treatment plant`s influent is measured with flow through two 6` Parshall Flumes.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Perimeter Monitoring and Area Monitoring

    GasFinder2 can be permanently installed to monitor chemical and petroleum plants for both combustible and toxic gases. GasFinder2 can be used to replace arrays of point sensors for perimeter monitoring. A single light path will replace many point sensors. With GasFinder2 perimeter monitoring, all gas dispersed from a facility is detected and logged.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Water intake protection monitoring for wastewater treatment industry

    Intake protection systems have been extensively installed to protect water treatment works, from ingress of polluted water and waste-water plants from toxic chemical loads. A suitable system typically comprises a suit of instrumentation, measuring key chemical, physical and indicator parameters dependant upon the identified risks, associated with the individual site activity or discharges from neighbouring industry.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Final effluent monitoring for wastewater treatment industry

    Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Sewage Treatment Plants and Flow Sensors for Industry Application

    In sewage treatment plants, flow sensors are primarily installed for internal reasons. Ultrasonic flow meters are used to control the flow velocity in partially filled and fulfilled pressurized pipes, specific plant components, for leak detection or to control the use of additives. International regulations such as the EU-Directive for handling municipal waste water require flow metering for a continuous surveillance of waste water flow. Defective flow monitoring in sewage-treatment plants can therefore...

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Waste water treatment plants Screening area: stripping

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. To ensure the safety of operatives in the screening building/area of waste water treatment...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Waste water treatment plants Personnel Safety & H2S filter management

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. As a result of the confinement of the waste water stations, toxic components such as H2S...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Measurement solution for high NH3 monitoring from wastewater

    Protea was asked to supply a high level ammonia (NH3) measurement system for a waste water treatment plant. The reflux drums at the inlet to two ammonia stripping towers needed to be measured continuously. Protea designed a solution based around our Solus TDLAS analyser platform and a high level dilution system. The Solus analyser was configured for NH3 measurements in the range...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Drinking water analysis for municipalities

    GE Analytical Instruments offers several Sievers TOC Analyzer models designed specifically to simplify monitoring of drinking water treatment plants. Always knowing the TOC levels throughout a water treatment plant, and improving TOC reduction, can help a plant not only control DBPs, but also implement efficient and potentially cost saving treatment processes.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • QUA - Industrial Water Filtration

    QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your...

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Water accountability portable monitoring for solving flow rate mystery

    The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Water quality monitoring for municipal drinking water industry

    Real Tech offers solutions that can provide substantial benefits to drinking water treatment plants. Continuous online monitoring can ensure water quality standards are met without the need for chemical overdosing while maintaining high confidence in the safety of the treated water. Significant cost savings can be achieved by optimizing coagulant dosage, reduced sludge production and reduced energy requirements.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Waste water respirometry solutions for monitoring activated sludge health - sour test

    Respiration rate monitoring of Antwerp treatment works showed periods when the activated sludge was up to 40% inhibited, with resultant sludge washout episodes. Using the Health monitoring test, a pattern of ‘normal’ respiration rates for a plant can be determined. Lower respiration rates will alert the treatment works to a chronic toxicity problem, allowing corrective actions to be taken. Toxicity monitoring can now be carried out on a routine daily basis, at all treatment works receiving potentially toxic...

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Fugitive emissions monitoring on industrial sites

    The real-time monitoring of odorous gases or more classical pollutants emitted by industrial sites (wastewater treatment plants, refineries, landfills, etc.) appears nowadays as a requirement, in order to optimize the site process and operations, or communicate towards the neighborhoods and local public bodies. While emissions can be measured directly at the source (in the stack, exhaust, etc.), ambient air measurement all around the sites provides a better accuracy and anticipate pollution episodes. This is why...

    By ENVEA Cairpol (ex Environnement S.A) based in POISSY Cedex, FRANCE.

  • Premium

    Machine condition monitoring for municipalities

    Overview

    Cities and towns are often responsible for maintaining critical assets such as water and wastewater treatment facilities and power generation plants. Oil analysis on this critical equipment as part of a robust maintenance program is a very cost effective way of failure avoidance. Additionally, greater emphasis on environmental conservation and a focus on delivering critical services while operating under reduced budgets leads municipalities to activate these programs. Spectro oil analysis...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Disposal and Cleaning Equipment for Waste Water Industy

    Drinking water is not the only area requiring flow monitoring. The disposal and cleaning of waste water also requires flow meters. Waste water used to be dumped directly into the soil or an open channel. As awareness has increased, most discharges are now treated to assure long term sustainability. Modern water treatment plants are highly complex systems that require the use of flow sensors to monitor flow velocity in open channels for waste water discharge. Likewise facilities for waste water collection...

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you