Natural odor control for wastewater treatment processes. Industrial and municipal wastewater treatment generates odors that can be strong, persistent, and a nuisance to employees, residents, businesses, and industries located near the wastewater treatment plant.
Control of wastewater is increasingly becoming important to avoid potential environmental and increasing legal consequences. Accurate pH, O2, conductivity and turbidity measurements are critical in modern wastewater treatment. METTLER TOLEDO offers reliable, cost-effective solutions to control industrial effluents.
Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.
Biowater have knowledge and competence to help in designing and building new systems and upgrade existing infrastructure based on biotechnology as CFIC, MBBR and IFAS solutions.
The Company offers cost-effective solution that allows municipal plants to both increase their treatment capacity and upgrade the effluent quality with minimal civil works.
Water is used for a wide variety of purposes in industrial production. Water has to be treated, so that sufficient amounts are available in the quality required for production. Process water must generally be re-treated after it has been used, so that it can either be discharged according to regulations or returned to the water cycle.
One of the biggest costs for water-water treatment is energy consumption; the cost of which is likely to escalate with increased demand. Ineffective process control may not only be costly but environmentally impacts though the inefficient use of an un-renewable resource. Furthermore, poor process control in one area may also impinge on neighbouring processes ultimately affecting effluent water quality.
TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries. In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%. The dewatering containers can be custom-sized to the application, placed in available space between other structures...
Printing and Photo Processing Wastewater Treatment and Disposal. The printing industry and photographic processing produce a tremendous amount of waste water, from washing prints, cleaning between color changes, cleaning ink shipping containers and cleaning ink delivery systems. The wastewater produced is often contaminated with heavy metals and other highly toxic materials.
Among the various industrial treatment options available for heavy metal reduction, few are simple, proven, affordable, and reliable as the selective adsorption treatment technology offered by AdEdge Technologies. AdEdge provides a line of pre-engineered, packaged industrial wastewater treatment systems designed for removal of heavy metals from groundwater and industrial wastewater using a variety of adsorption media technologies.
An optimal heat transfer is the most important point in every water cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops for cooling and process water systems customized solutions, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and biocides.
Waste water is any water that has been adversely affected in quality by anthropogenic influence. Municipal wastewater is usually conveyed in a combined sewer or sanitary sewer, and treated at a wastewater treatment plant or septic. Treated wastewater is discharged into receiving water via an effluent sewer.
Ozone breaks up filaments and improves settling characteristics of the sludge...
Filamentous sludge is a common problem at activated sludge plants. With ozonation of the return sludge flow it is possible to reduced the amount of filamentous bacteria in the sludge and significantly increased the settling properties of the sludge.This in turn means better performance of the activated sludge process.
When a bioreactor is connected to the sludge line the removal of the damaging filamentous bacteria means higher...
Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process.
MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for...
30 years of experience in the design, construction, and operation of waste-to-energy plants for a wide range of industrial and municipal clients. Our proprietary anaerobic treatment technologies process wastewater and sludge to produce biogas, which can b
Compressor condensate wastewater is generated during hot and humid weather as part of the process of condensing shop air to provide compressed air for machine tools. Typically, these waste streams are transparent with a slight floating layer of oil. Compressor Condensate wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater. This however,...
THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.
The waste water from the transformation process in wineries has a high organic material content, as well as large pH variations that can be harmful to the environment. This water treatment must be carried out by using the appropriate processes.