Only show results available in Virginia? Ok

wastewater treatment system design Applications

  • Monitoring engineering systems for wastewater treatment industry

    Sometimes an `off the shelf` water quality monitoring product is just not available and it is necessary to engineer a complete bespoke monitoring solution. System integration demands a diverse range of abilities. PPM is experienced in designing the correct suite of instrumentation combining manufactured, distributed and factored products.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Tertiary Treatment

    DEVISE ENGINEERING designs and constructs autonomous packaged systems for Tertiary Treatment aimed for water recovery and re-use. The systems comprise of pre-engineered and prefabricated units all installed inside an appropriately modified ISO container for easy deployment and quick installation and start-up. DEVISE uses top quality Ultra-Filtration membrane modules and in the package is included all necessary equipment, systems and controls for a complete installation. A wide range of capacities can be...

    By DEVISE ENGINEERING S.A. based in Athens, GREECE.

  • Water and Wastewater Equipment for Water & Wastewater Treatment

    For over 30 years, Water and Wastewater Equipment Company has been providing efficient, cost-effective and compliant solutions to water and wastewater treatment applications, all the way from small batch systems to continuous-flow systems treating 500,000 gallons per day. Our technical analysts and designers are experienced in every phase of wastewater treatment – from fabrication, installation and laboratory testing – to systems management.

    By Water & Wastewater Equipment Company (WWE) based in Cleveland, OHIO (USA).

  • Premium

    Ozone Water Treatment for Municipal Water Treatment

    Maintenance free and easy to operate ozone generators supplied by ozone generator manufacturer who knows ozone. Primozone is a modern ozone generator supplier who not only supplies ozone generators but also designs complete ozone water treatment systems. We know ozone and can be your partner in designing a complete and efficiently working ozone generator system for most municipal water treatment issues. The Primozone® technology allows for solutions that are cost effective. Our ozone generators produce a high...

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Ozone Water Treatment for Industrial Water Treatment

    Industrial waste water treatment is a complex area. With Primozone you get at complete partner who can customize an ozone water treatment solution for you. Our ozone generators and ozone water treatment systems are robust and maintenance free. The modular design allows for stepwise upgrades. As a partner we can provide a complete system design or stand alone ozone generator sales. We have mobile pilot test equipment and are happy to do pilot tests to get the perfect solution. We can adapt our solutions to fit...

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer...

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Biological wastewater processes for municipal treatment plants

    Biowater have knowledge and competence to help in designing and building new systems and upgrade existing infrastructure based on biotechnology as CFIC, MBBR and IFAS solutions.

    The Company offers cost-effective solution that allows municipal plants to both increase their treatment capacity and upgrade the effluent quality with minimal civil works.

    By Biowater Technology AS based in Tonsberg, NORWAY.

  • Water treatment system for rain water and storm water

    Through our SkyHarvester Water Conservation Systems division, Watertronics offers a single-source solution for commercial, industrial and municipal water harvesting systems at new or existing sites. Our design and engineering group will work hand-in-hand with your architect or engineer to provide integrated custom solutions to harvest, store, treat, pump and control the distribution of harvested rain water.

    By Lindsay Corporation based in Omaha, NEBRASKA (USA).

  • Treatment of Municipal Water

    TIGG specializes in providing equipment and services for removal of disinfection byproducts, metals, organics and solids in the municipal water treatment market using activated carbon and other media. In addition to treatment systems for the municipal water market, TIGG can design and fabricate tanks for surge protection and emergency water storage.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • Process Design

    Custom water and wastewater engineering, consulting and process design services to prevent air, land, water and environmental pollution. We rework systems as processes change and troubleshoot where necessary to bring systems into compliance. • High purity and process water • Biological nutrient removal • Solids treatment • Toxicity reduction • Industrial treatment • Advanced oxidation and alternative disinfection • Effluent reclamation and reuse • Land application systems • Natural treatment systems •...

    By Yates Environmental Services based in Spokane, WASHINGTON (USA).

  • Premium

    Ultraviolet Disinfection system for the ATEX hazardous area UV systems

    ATEX Certified UV Systems for Hazardous Zones 1 & 2. As a key water treatment technology, UV systems are increasingly required to be design for use in hazardous areas with explosive atmospheres.  Whilst there are many UV systems available on the market, there are very few that can meet the strict requirements of the ATEX & IECEX directives for installation into explosive atmospheres and classified hazardous zones. atg UV Technology is the worlds` leading supplier of ATEX and IECEX certified UV...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Industrial wastewater treatment systems for oil and gas industry

    Ecolotron, Inc. manufactures the world’s best electrolytic equipment and systems used in a variety of water and wastewater treatment applications. Ecolotron, Inc. applies patented E – FLOC technology to design and build electrolytic wastewater systems for the treatment and beneficial reuse of frac, flow-back and other produced waters associated with oil and gas exploration and production activities. E-FLOC technology uses a low Voltage electric current to destabilize multiple contaminates...

    By Ecolotron, Inc. based in E. Dickinson, TEXAS (USA).

  • EDI Solutions

    QUA’s FEDI® (Fractional EDI) stacks have superior hardness tolerance compared to the other EDI products on the market. With a dual voltage process this allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant's design economics and reliability. FEDI stacks are available in three different models which can be applied either for higher hardness tolerance or high water flow rates. MEGA FEDI stacks are ideal for large capacity, high flow...

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Water Treatment for Municipal Drinking Water

    Municipalities use TIGG’s water treatment equipment all across the United States. Our experts work with consulting firms, engineers and local water authorities to design and manufacture integrated adsorption systems for the removal of drinking water contaminates such as metals, organics and solids through the use of granular activated carbon, sand, multi-media, and resins.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • US Peroxide Rapid Response

    US Peroxide (USP) is uniquely positioned to rapidly respond to your environmental treatment challenges. USP combines experienced applications and equipment field support with a large inventory of storage systems and pumping modules to respond quickly to time sensitive water and wastewater treatment situations. Advantages With considerable inventory of tank and pump systems as well as our partnerships with leading chemical suppliers, USP can mobilize chemicals and equipment quickly to respond to your rapid...

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Water treatment solutions for the mobile units industry

    Nowadays, drinking water is still not available for all the population. The development of mobile units makes possible the supply of drinking water to remote areas. We can design sand filtration systems adapted to specific demands for containerized water treatment plants

    By Poltank S.A.U. based in Sant Jaume de Llierca, SPAIN.

  • Desalination Thermal Multiple Effect Distillation (MED)

    Aquatech’s Multiple Effect Distillation (MED) Desalination technology, using a spray film™ design, has been developed and improved over decades of in- house research and onsite experience of such systems worldwide to provide an environmentally friendly system to meet the global challenges of a reduced carbon footprint. Production capacity up to 10 MIGD (45,500 m3/day) in a single unit: Significantly lowers electrical consumption Design flexibility to use low to medium pressure supply steam Minimum down time...

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Desalination -Membrane Seawater Reverse Osmosis (SWRO)

    Aquatech is committed to being the leader in membrane technology with a focus on breaking barriers related to pretreatment, energy recovery, and overall water recovery. We are progressively making strides in optimizing the lifecycle cost and increasing the reliability of SWRO equipment installations. Our approach is to take complete responsibility of SWRO plant installations to ensure complete design integration….. from intake to outfall, Aquatech can take single point responsibility. • More than a decade of...

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Ultraviolet disinfection systems for the drinking water inspectorate

    With atg UV systems treating in excess of 2500 m3/hr daily, Ultraviolet disinfection is no longer an ‘emerging` technology.  A number of Water Treatment Works across the world are now investing heavily in Ultraviolet technology as the threat of chlorine resistant parasites, such as Cryptosporidium and Giardia, continue to pose a serious risk to water companies and their customers. To this end, in the UK, the DWI have issued their guidelines for UV operation and system selection to the UK water...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you