Only show results in Virginia? Ok

water analyzer Applications

  • Oxygen Permeation Analyzers & Water Vapor Permeation Analyzers for Packaging Industry

    Systech Illinois` comprehensive permeation range includes the recently acquired Lyssy and PermMate product lines which offer precision oxygen and water vapor analysis of packaging film barriers.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Water Vapor Permeation Analyzers for Packaging Industry

    For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Chemical Oxygen Demand (COD) Analyzer for Cleaner and Safer Drinking Water

    MANTECH’s chemical oxygen demand (COD) analyzer is breaking new ground in the science of monitoring source and treated drinking water. In addition to providing 15-minute COD results and biochemical oxygen demand (BOD) estimates, MANTECH’s PeCOD® Analyzer measures natural organic matter (NOM) in raw and treated drinking water. The NOM Analyzer™  — which is the drinking-water application of MANTECH’s novel PeCOD® COD-testing system — does what no other technology has done before. It quickly and safely measures oxygen demand and the associated oxidative changes in organic matter in raw and treated drinking water, at low concentrations and without the use of hazardous chemicals.

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Water-Wastewater Measurements / NO analyzers for measurement of nitrification processes

    NO analyzers for measurement of nitrification processes applied for treating high concentration nitrogen wastewaters by microbial nitric oxide production. Also, the conversion of N-nitrosomines to nitric oxide for the quantification of those compounds in wastewater impacted waters. View Water-Wastewater Measurement Products

    By Eco Physics Inc. based in Ann Arbor, MICHIGAN (USA).

  • Chemical Oxygen Demand (COD) Analyzer for Craft Brewers

    MANTECH’s innovative PeCOD Analyzer is helping Ontario’s craft brewers manage their wastewater more effectively. PeCOD is an integral part of the Brü Clean System, a specialized wastewater treatment process developed by Econse Water Purification Systems for the craft brewing industry. Together they helped reduce the amount of wastewater for treatment by 75 per cent. “We can accomplish in a few minutes what other companies take weeks or months to do and this lets us move straight to effective treatment solutions for our clients.” — Derek Davey, Econse Water Purification Systems.

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Chemical Oxygen Demand (COD) Analyzer for Industrial & Municipal Wastewater Industry

    MANTECH’s game-changing water quality analysis technology is revolutionizing wastewater treatment at industrial and municipal facilities worldwide. The PeCOD Analyzer provides accurate chemical oxygen demand (COD) results and biochemical oxygen demand (BOD) estimates within minutes rather than the hours or days required for standard COD and BOD testing — without the use of dichromate, mercury, acids and other harmful chemicals.

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Premium

    Validation of Salt Water Disposal Well Treatment Plants with Handheld Oil in Water Sample Analyzer

    Ideally, a continuous online monitor would be used for collecting data to determine upset frequencies, duration and normal conditions. Many of the SWD facilities and demonstration plants do not have a budget that allows for continuous monitoring. However, high frequency sample analysis can be performed on site, using a portable analyzer. Easy to use, low cost field analyzers, such as the TD-500D, are essential for optimizing the effectiveness of treatment systems during pilot studies and meeting a budget that includes frequent measurements.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Process water

    Process water is one of the most challenging for analysis instrumentation. Mostly this water is characterized by a certain purity, fluctuating loads, as well as very high salt concentrations. Since any disturbance in water-circuits can lead to an entire plant shutdown, resulting in huge costs, reliable and fast online water analyzers are an essential. Due to the diverse demands of various measurement challenges, application-specific analyzers provide huge advantages against standard analyzers that are used for every application.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Premium

    Instruments and analyzers for spectral DNI measurements

    Where the pyrheliometer is most suitable to quantify the total DNI of the solar spectrum. The spectroradiometer gives details about the energy distribution which is important for PV or CPV cell research. The solar spectrum wil change with the angle of incidence and its path through the atmosphere. Photons wil be reflected, scattered or absorbed. Big absorbers of infrared irradiance are water vapor, carbon dioxide, and ozon.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Waste Water

    Waste water, especially industrial waste water, is the most challenging water for instrumentation. Mostly, this water is characterized by highly fluctuating loads, very high salt concentrations as well as a high particle density. Hence, the accurancy and speed of measurements depends on the measurement system itself and the oxidation technique used. Obviously, application-specific analyzers provide huge advantages against standard analyzers that are used for all applications.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Oxygen Permeation Analyzers for Packaging Industry

    Systech Illinois` comprehensive permeation range includes the Lyssy product lines which offer precision oxygen and water vapor analysis of packaging film barriers.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Instruments and analyzers for DNI measurements with a pyrheliometer

    Solar Direct Normal Irradiance (DNI) represents the direct solar component and contains about 80% of the total solar energy budget on earth. Outside the atmosphere (AM0) the solar irradiance is considdered as a constant (1367 W/m2) that slightly fluctuates with a 11 year cycle. The DNI at the earth surface is highly variable due to the atmospheric conditions (clouds, aerosols, water vapor and molecules).

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Instruments and analyzers for spectral irradiance portable solutions

    Reflection and transmission measurements on materials, vegetation, water or atmosphere give valuable information about biological, physical and chemical processes. Processes driven by solar radiation, in particular bands of the spectrum through the so called action spectra, can be analysed or quantified with a sensor senitive in the particular spectral band. The MS-720 portable spectroradiometer gives total freedom to be used in different applications and range of the spectrum between 350 - 1050 nm.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Chemical Oxygen Demand (COD) Analyzer for Food & Beverage Industry

    Real Time Chemical Oxygen Demand Improves Wastewater Management. MANTECH’s PeCOD Analyzer water quality analysis technology provides food and beverage processors with accurate, real time data that enables them to make timely decisions and effectively manage their water and wastewater. The PeCOD Analyzer is a fast, green, accurate alternative to traditional chemical oxygen demand (COD) and biological oxygen demand (BOD) testing for measuring organics in wastewater. Rapid, reliable and economical testing helps companies remain in compliance with their permits and respond quickly when they are not.

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Premium

    Determination of nitrites in water by fluorimetric method

    Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of nitrites in water samples using the FLUORAT-02 analyzer.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Water quality monitoring systems for portable water plants

    Low maintenance and reliability are key requirements for analyzers in potable water plants. Cost of ownership is another big issue.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Premium

    Online monitoring solutions for the drinking water industries

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards. On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Determination of zinc in water by fluorimetric method

    In accordance with WHO’s Guidelines for Drinking Water Quality there is no health-based guideline value of zinc in water concentration. Concentration of zinc in tap water can increase as a result of its dissolution from pipes. Also, elevated levels of zinc may be an indicator of increased concentrations of other toxic metals; thereby zinc in water analysis is an essential analytical task. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of zinc in water samples using the FLUORAT-02 analyzer.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you