Only show results in Virginia? Ok

water bodies Applications

  • Patented Waste Water Recovery System for Body Shop Waste Capture

    The GEOMAT Waste Water Recovery Systems are designed to be ideal for semi-permanent installations where installing a ground recovery system is not desired or economical. A Body Shop is an ideal application for this system as it can be custom designed and manufactured to specific needs while meeting all EPA regulations.

    By GEOMAT based in Tampa, FLORIDA (USA).

  • WATER PURIFICATION

    Citto Activated Carbon ‘Water Series’ provides total solutions for water purification using cutting edge carbon manufacturing technologies. We offer high quality, standard, specially processed products complying with ISO9001-certified. Our carbons effectively remove organic molecules including Volatile Organic Compounds (VOCs), disinfection by-products (DBPs), chlorinated compounds, chloramines, polycyclic hydrocarbons, heavy metals, colored bodies, toxins and oils among many other contaminants.

    By Citto Corporation based in TORONTO, ONTARIO (CANADA).

  • Premium

    Water monitoring technology for coastal & estuary

    Measurement of water quality in coastal regions and estuaries is critical in the characterization of hypoxic ‘dead zones’ as a result of nutrient loading and algal blooms in the water bodies. Sediment loading analysis through turbidity measurement is also important for coastal trend identification and modeling. Hydrolab and Sea-bird Coastal offer a variety of multiparameter water quality instrumentation and nutrient sensors for long-term coastal applications.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately wetted.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Disinfection solutions for water treatment industry

    Ballast Water Solutions. Ship ballasts often carry aquatic organisms that can cause a significant problem when transported from one body of water to another. In fact, the invasion of non-native species via ballast water has been described by maritime and environmental authorities as `one of the greatest threats to the world`s waterways.`

    By Calgon Carbon Corporation based in Pittsburgh, PENNSYLVANIA (USA).

  • Industrial water Nitrate removal from drinking water

    Since nitrates are very soluble and do not bind to soils, they have a high potential to migrate to groundwater. For the short-term, excessive levels of nitrate in drinking water have caused serious illness and sometimes death. The serious illness in infants is due to the conversion of nitrate to nitrite by the body, which can interfere with the oxygen-carrying capacity of the child’s blood. This can be an acute condition in which health deteriorates rapidly over a period of days. Symptoms include shortness of breath and blueness of the skin.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Water monitoring technology for mining

    Ensuring that pollutants from mining activities do not enter surrounding natural water bodies is a key issue in environmental monitoring and regulatory compliance.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Wastewater treatment management for storm water treatment industry

    Aging treatment and collection systems in developed countries and the lack of appropriate treatment systems in developing countries along with higher precipitation levels occurring over short periods of time are driving government and industry leaders to expand or upgrade stormwater treatment systems to keep surface water bodies clean, while using this collected water for use in non potable applications.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Erosion & sediment control solutions for water remediation

    `Water should never be treated as a nonrenewable resource; it should always be treated with the respect it deserves as the foundation of life on the planet.` Most water on earth is in a continuous cycle between water bodies, land and the atmosphere. An important component of smart water solutions is the cycling of water treatment solutions using processes by which water enters, moves through and exits soil are essential for sustaining plants and soil organisms, transporting nutrients and recharging surface and ground water supplies. Water moving in soil also impacts the behavior and transport of soil solutes and their effect on water quality.

    By Erosion Control Forum based in Bend, OREGON (USA).

  • Data analysis and visualization tools for surface water modelling

    Volumetric modeling of surface water bodies to include mapping of properties data into the volume requires the capabilities only found in EnterVol. When trying to assess the health of a lake, river or stream, volumetric data is essential. Once you apply the capabilities of EnterVol to this task, you’ll discover trends in your data that were previously hidden or suppressed by the limitations of 2D techniques.

    By C Tech Development Corporation based in Las Vegas, NEVADA (USA).

  • Issues related to permitting of Special Water Use

    • Preparation and maintenance support of documentation for obtaining a Special Water Use Permit*, which is issued by the Departments of Ecology and Natural Resources of the regional state administrations of Ukraine; • Calculation of individual current standards (technological, balance sheet standards) of water consumption; • Help in execution of state statistical reporting forms: 7-gr (groundwater) and 2-TP (water industry); • Development of project of standards for maximum permissible discharges (MPD) of pollutants from reverse waters into water bodies.

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • Water treatment for meat processing

    Water is one of the single biggest raw materials used in meat processing, and its quality is of great importance to prevent contamination of food product. The use of contaminated water in the processing plant can spread infection across the whole food batch. This is a cause of serious concern to the food industry, consumers and regulatory bodies, besides that, it causes financial losses and food scare. Chlorine dioxide, a very powerful biocide, has a number of advantages over other products commonly used in the meat processing industry. When properly applied, chlorine dioxide can act as a break in contamination thereby reducing/eliminating cross contamination as well as removing superficial microorganisms before they have an opportunity to become attached and penetrate the carcass.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Premium

    Water monitoring technology for oil & gas

    Monitoring natural water bodies surrounding oil and gas drilling activities like hydraulic fracturing is a key issue in environmental monitoring and regulatory compliance.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Surface water quality testing for the environmental monitoring industry

    Aquaread stock a wide range of testing equipment designed to track a number of parameters and water quality testing measures. These can be used in many different bodies of water, including rivers, lakes, streams and seawater. The advantages of tracking water quality and testing for numerous parameters means that it is easier to notice changes which could cause damage to aquatic ecosystems. Early detection not only helps with monitoring water quality, but also helps to put mitigating measures in place. We have a wide range of parameters, although the most popular of these allow for surface water testing, pH, temperature, electrical conductivity and measuring levels of dissolved oxygen. These are standard measurements included in most standard Aquaprobes, although if you require more specific parameter testing then there are a number of additional parameters which can be added onto to the base Aquaprobe to compensate this.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Determination of Mercury in Water Samples by HG-AFS

    Mercury and its sompounds are highly toxic materials and can be transferred into the human body via water; the concentration of mercury in water generally is very low. With the superior sensitivity of Aurora`s Atomic Fluorescence Spectrometer, the LUMINA 3300, direct measurement of mercury in water sample is possible.

    By Aurora Biomed Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).

  • Premium

    Ultraviolet disinfection systems for the swimming pools industry

    Ultraviolet disinfection is now an established method of water treatment for Swimming Pools, Spas, Hydro Pools, Splash Pads and Water Features, and has become the preferred treatment choice for a number of leading international leisure brands. atg UV`s range of treatment systems are proven to improve the swimming pool environment by improving water quality, air quality and safety, leading to increased customer satisfaction. UV systems not only provide disinfection against the 17 known chlorine resistant micro-organisms, such as Cryptosporidium and Giardia, which have a thick outer membrane making them highly resistant to traditional Chlorine disinfection, UV also destroys chloramines. Chloramines are formed when free chlorine reacts with organics, such as sweat, body fats and urine, brought into the pool environment by bathers.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Distributed Temperature Sensing Technology for Stream Monitoring

    Temperature is an important factor in streams ecosystems. Heat tracers have been used to characterize contaminant transport, infiltration rates and energy exchange with groundwater, the atmosphere and radiation. The dynamics of these complicated water bodies is also affected by seasonal and diurnal patterns making characterization particularly challenging. Utilizing temperature measurements that capture spatial and temporal variations at stream ecosystem interfaces provides a mechanism for detailed characterization.

    By Silixa Ltd based in Elstree, UNITED KINGDOM.

  • Premium

    Industrial wastewater solutions for clearcat crystal-clear distillate from used coolant emulsions

    Metal-working factories generate a lot of oily effluent as a result of manufacturing processes. The coolant emulsions tailored to the individual application contain oils, waxes, greases and preservatives, as well as a cocktail of ingredients to improve product properties. The emulsions used must not be discharged untreated into the drain system or open bodies of water; they must be disposed of at high cost.

    By H2O GmbH based in Steinen, GERMANY.

  • Groundwater Monitoring for Remediation

    Many fresh water sources have been degraded to toxic levels by the inclusion of industrial, agricultural, and human waste products that have been discharged into the closest body of water, accidentally or deliberately for many years.

    By HERON Instruments Inc. based in Dundas, ONTARIO (CANADA).

  • Data analysis and visualization tools for ocean and lake sciences

    Oceanic and lake sciences challenge the abilities of traditional software tools. Virtually everything of interest lies beneath the surface. This is a 3D world with complex issues that affect the life in these water bodies and all life on Earth. EVS, MVS, and EnterVol’s modular toolkits provide the technology to address a myriad of surface and subsurface issues.

    By C Tech Development Corporation based in Las Vegas, NEVADA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you