Only show results in Virginia? Ok

water conditioning industry Applications

  • Wilsa ElectroWaveTM Conditioning - Non-chemical water conditioning, break emulsions, enhance recovery

    Hudson Industries (a licensed partner) is now offering the patented Wilsa ElectroWaveTM Conditioner (EWC) for non-chemical water conditioning that provides enhanced oil recovery up to 99.999% with the power to break difficult emulsions. The Wilsa Effect is targeted at polar fluids, such as water. The Wilsa EWC directly targets the surface and interfacial tension of water molecules which breaks emulsions and forces the water to reject foreign matter such as oil and suspended solids. Furthermore viscosity is greatly reduced which allows the now coalesced oil to exit the water column with less friction, thus Stokes Law is fundamentally enhanced and retention time is greatly reduced. Combine the Wilsa EWC with your existing separation equipment or pair it with Hudson Coalescing Separator for maximum oil recovery/ removal. Contact us today for more information about Hudson Separators and Wilsa ElectroWaveTM Conditioning.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Industrial water boiler feed water

    Ion exchange is an effective, versatile means of conditioning boiler feedwater. The term “ion exchange` describes the process : as water flows through a bed of ion exchange material, undesirable ions are removed and replaced with less objectionable ones. For example, in softening processes, calcium and magnesium ions(hardness) are exchanged for sodium ions. In dealkalization, the ions contributing to alkalinity(carbonate, bicarbonate, etc.) are removed and replaced with chloride ions.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Industrial water Nitrate removal from drinking water

    Since nitrates are very soluble and do not bind to soils, they have a high potential to migrate to groundwater. For the short-term, excessive levels of nitrate in drinking water have caused serious illness and sometimes death. The serious illness in infants is due to the conversion of nitrate to nitrite by the body, which can interfere with the oxygen-carrying capacity of the child’s blood. This can be an acute condition in which health deteriorates rapidly over a period of days. Symptoms include shortness of breath and blueness of the skin.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Industrial water Zinc recovery from pickling acid solution

    The zinc chloride is to be removed from pickling acid at 6N concentration. Under these conditions, the ZnCl2 will form a stable complex and may be removed by PuriTech`s ION-IX technology using an anion resin. The resin is then eluted with water.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Traveling Water Screens for Nuclear Power Industry

    Our nuclear plant services includes custom traveling water screen design and installation. We are one of the leading traveling water screen suppliers worldwide. Our screen solutions solve debris removal plant inflow sources to deal with solid contaminating material. Varied screen mesh sizes allow for use in varying conditions and applications.

    By International Water Screens based in Bakersfield, CALIFORNIA (USA).

  • Industrial Meshes for Polymer Filtration

    The filtration of extruded polymers is a separate application area for SolidWEAVE filter media. The particular requirements of the process_ conditions require customized and continuously optimized manufacturing methods and production processes for the wire mesh filters.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Premium

    Traveling Water Screens for Geothermal Industry

    Our geothermal plant services includes custom traveling water screen design and installation. We are one of the leading traveling water screen suppliers worldwide. Our screen solutions solve debris removal plant inflow sources to deal with solid contaminating material. Varied screen mesh sizes allow for use in varying conditions and applications.

    By International Water Screens based in Bakersfield, CALIFORNIA (USA).

  • Premium

    Traveling Water Screens for Hydroelectric Industry

    Our hydroelectric services includes custom traveling water screen design and installation. We are one of the leading traveling water screen suppliers worldwide. Our screen solutions solve debris removal plant inflow sources to deal with solid contaminating material. Varied screen mesh sizes allow for use in varying conditions and applications.

    By International Water Screens based in Bakersfield, CALIFORNIA (USA).

  • Belt filter press

    Belt Filter Press is often applied in wastewater treatment plant sludge dewatering process and it is one of the most cost effective options regardless of the type of sludge feed into the systems. There are several combined processes added into one unit and it involves different applications such as chemical conditioning, gravity drainage and mechanical shearing and compression effect to remove water and dry up the sludge. Today, belt filter presses are widely used and it has become a standard for general wastewater sludge application and thus, learning how to optimize and use it to your advantage is very important.

    By Henan Jincheng Filter Equipment Co., Ltd based in Yuzhou city Henan province, CHINA.

  • Premium

    EDI Solutions

    QUA’s FEDI® (Fractional EDI) stacks have superior hardness tolerance compared to the other EDI products on the market. With a dual voltage process this allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant's design economics and reliability. FEDI stacks are available in three different models which can be applied either for higher hardness tolerance or high water flow rates. MEGA FEDI stacks are ideal for large capacity, high flow systems normally required in heavy industrial projects such as power, petrochemicals, & electronics for high purity water needs. Each stack can handle treated water flow of up to 75 GPM . MEGA FEDI’s unique stackable design minimizes piping, reduces footprint, and makes it simple and easy to install on skids. FEDI-Rx products are specially designed for applications in pharmaceutical, biomedical and laboratory applications where installations require hot water sanitization to meet

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Water Treatment in Mining

    The Mining Sector is one of the core industrial sectors being served by AdEdge Technologies. It is quickly becoming the fastest growing segment of our company. We offer customer driven water treatment solutions by understanding the needs of our customers and the demands of achieving ever changing and challenging water treatment discharge standards. From exploration to site closure and post closure, AdEdge can assist you in meeting your water treatment needs. With today’s emphasis on sustainability, AdEdge’s solutions are long-term focused and environmentally sensitive. We understand that the solutions employed must be able to satisfy regulatory agency requirements and improve the bottom-line. Ad-Edge understands that our solutions must be compatible with our customers’ operating environment that includes widely fluctuating market conditions, commodity markets, and thin operating margins.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Sulfide Oxidation with Hydrogen Peroxide (H2O2)

    Sulfide Odor Control Sulfide is found throughout the environment as a result of both natural and industrial processes. Most sulfide found in nature was produced biologically (under anaerobic conditions) and occurs as free hydrogen sulfide (H2S) - characterized by its rotten egg odor. We are most likely to encounter biogenic H2S in sour groundwaters, swamps and marshes, natural gas deposits, and sewage collection/treatment systems. Manmade sources of H2S typically occur as a result of natural materials containing sulfur (e.g., coal, gas and oil) being refined into industrial products. For a variety of reasons - aesthetics (odor control), health (toxicity), ecological (oxygen depletion in receiving waters), and economic (corrosion of equipment and infrastructure) - sulfide laden wastewaters must be handled carefully and remediated before they can be released to the environment. Typical discharge limits for sulfide are < 1 mg/L. Sulfide Treatment Alternatives There are dozens of alternatives for treating sulfide laden waters, ranging from simple air stripping (for the low levels present in groundwaters) to elaborate sulfur recovery plants (used to treat several tons per day at refineries and coal burning power plants). There are processes based on biology (using compost filters, scrubbing media, or inhibition/disinfection), chemistry (oxidation, precipitation, absorption, and combination), and physics (adsorption, volatilization, and incineration). Each process occupies a niche which is often defined by the scale and continuity of treatment, whether the sulfide is in solution or is a gas, the concentration of sulfide involved, and the disposition of the sulfide containing medium. However, for reasons relating to convenience and flexibility, chemical oxidation (using hydrogen peroxide) continues to grow in its scope of application. Treatment with Hydrogen Peroxide While other peroxygens such as permonosulfuric (Caro’s) acid, peracetic acid, and persulfates will oxidize sulfide, their use for this application is overkill. Hydrogen peroxide (H2O2) is considerably simpler and more cost-effective. H2O2 may control sulfides in two ways, depending on the application: Prevention - by providing dissolved oxygen which inhibits the septic conditions which lead to biological sulfide formation; and Destruction - by oxidizing sulfide to elemental sulfur or sulfate ion.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Diverse Surface Treatment Technologies for Military Industry

    We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and ballistic equipment to prepare for and return from missions.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Filtration systems & solutions for energy sector

    Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience and extensive product range ensures we can supply a fully engineered tailored solution for every application.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.


    Docupak LLC, a full service marketing company headquartered in Alabaster, Alabama, has reduced chemical usage by a third and removed all scale from its cooling tower at its plant after installing the patented, award-winning Scalewatcher computerized, electronic water-conditioner from Scalewatcher North America. In addition there are no longer signs of algae growth on the cooling tower louvres. Founded in 1998, Docupak, the operating name of Document and Packaging Brokers Inc., develops and distributes materials for businesses nationwide. In addition to its headquarters in Alabaster, Alabama, the company also operates a further plant in Alexandria, VA and has sales offices in Atlanta, Chicago, Cincinnati, Dallas, Los Angeles, Tampa and Washington, D.C. Aware that health agencies continually draw attention to the risks of limescale and algae in cooling towers and wanting to reduce the use of chemicals in the cooling tower, Plant Manager, Anthony Kinstley decided to install the Scalewatcher electornic water-conditioner through local dealer, Al Chatham of Water Processing and Well Supply in Harpersville, Alabama. An industrial Scalewatcher was installed on to the water-feed line to the building and then a further unit was specifically fitted on to the recirculation line of the cooling tower. “Since using the system the scaling on our cooling tower has been eliminated and we currently use only a third of the original chemicals intended for the water treatment within our system”, said Anthony Kinstley. Many air conditioning and refrigeration plant systems are water-cooled. The heat generated by cooling coils is removed by water, which is passed through a water-cooling tower. These are recirculating systems, which operate at temperatures ideal for bacterial and algae growth, and have plentiful supplies of nutrients. In cooling towers, temperature, water hardness, pH, scale and corrosion are all factors, which increase the chance of biofilms, algae and Legionella colonization. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “Scalewatcher has proven itself to be highly effective. I would highly recommend this product and service without limitation,” concluded Antony Kinstley. Scalewatcher models are based on continuous research and over 25 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and are shipped throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you