Only show results available in Virginia? Ok

water control valve Applications

  • Constant Pressure pump control valves

    For use with water well pumps and booster pumps, the Cycle Stop Valve (CSV) turns any pump into a variable flow, constant pressure system. Working in conjunction with a small pressure tank, the CSV is usually adjusted to the middle of the pressure switch range. IE; 40/60 PSI switch, 50 PSI CSV. The size of the pressure tank determines how much water can be used by the house, before the pressure drops to 40 PSI, and the pressure switch starts the pump. As long as flow rates in and around the house vary from 1 GPM to as much as the pump can produce, the CSV maintains a constant 50 PSI on the system. When there is no more flow required for the house, the CSV allows the little pressure tank to fill to 60 PSI, and the pump is shut off by the pressure switch.

    By Cycle Stop Valves, Inc. based in Lubbock, TEXAS (USA).

  • Trapped Key Interlocks for Flow Control

    KIRK Eagle Series valve interlock systems can be implemented within many industries in which managing the flow of materials and products is critical.  Valve interlocks can aid in minimizing loss of product, preventing materials from mixing that may cause hazardous results,  and promoting flow control process safety that protects your personnel and equipment. The specific flow control applications below can be designed to meet the unique needs of every customer and can be added to an existing KIRK trapped key interlock system.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Ultrasonic Level Monitoring for Water Bottling Plant Level Control

    Culligan Water installs Greyline SLT32 Level Monitors to control tank levels in their bottling plant in Calgary, Alberta. With non-contacting ultrasonic sensors the SLT32`s control fill and discharge valves in five tanks containing spring water, reverse osmosis water and distilled water.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Measurement and control systems for the Boiler water monitoring

    In ongoing operation, the substances suspended in the boiler water are concentrated. In order to avoid the negative consequences (foaming, deposits) of excessive salt content in the boiler water, specified limit values must not be exceeded. With the aid of a desalination control valve, boiler water with concentrated content is constantly removed and replaced with clean water. If the limit values are exceeded, the conductivity limitation ensures prompt switching off of the burner(s). Foreign substances that have sunk to the bottom of the boiler are removed by briefly opening a drainage valve.

    By IGEMA GmbH based in Münster, GERMANY.

  • Force Main Systems Sulfide Odor Control with Hydrogen Peroxide

    Force main systems are typically high sulfide odor generators due to septicity conditions related to full pipe flow and a greater anaerobic slime layer (biofilm) thickness. Primary factors that influence sulfide loading generation in a force main include sewage temperature, BOD, retention time, pipe size and flow. Gaseous hydrogen sulfide (H2S) release at the force main discharge is usually the main concern related to odor and corrosion control needs; however, corrosion problems within the pipe can be of a concern (e.g. "crown cutting") at locations where air pockets can lead to concentrated H2S gas build up. Some basic considerations for assessing an appropriate sulfide odor treatment method for force main systems include: Retention time / duration of control Pump station type / cycling (e.g. vfd; start/stop, etc). Force main injection tap points, if any (e.g. air relief valves) Existence of intermediate re-lift stations or in series pump stations Manifold force main systems

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Industrial valves solutions for the energy industry

    Quality and reliability are the most important facts when plant engineers have to choose the components for power stations. Not matter if nuclear or fossil-fuelled, or when used in plants for renewable energy – shut-off and control valves by EBRO are first choice when quality and life cycle costing are the selection criteria. Different type series ensure that there is always a fitting solution for every application. If it is boiler feed water, condensate, cooling water or coolants – EBRO offers a reliable valve to fully meet the demands.

    By EBRO Armaturen Gebr. Bröer GmbH based in Hagen, GERMANY.

  • Level indicating transmitter for swimming pool level control

    A Surge Tank is used at the Okatokes Rec Centre Swimming Pool to regulate pool level. By monitoring level in a surge tank the non-contacting Greyline LIT25 Level Indicating Transmitter controls makeup water flow through a solenoid valve.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Water & wastewater piping joints

    Proco Products, Inc. has been supplying water and wastewater treatment plants with cost-effective, durable rubber check valves for decades. Our experience in these industries over the years has allowed us to develop sturdy, high-quality expansion joints and rubber duckbill check valves to assist in the control of back pressures while resisting corrosion and breakage from harsh conditions. Proco operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Premium

    Monitoring of hydroelectric dam sumps

    The Situation

    Hydroelectric dams produce electric power by harnessing the force of the water flowing through the dam. There are numerous sources for oil spillage:

    • The hydroelectric turbines are lubricated by lubrication oils.
    • The very large water control valves are normally hydraulic powered and are lubricated with various greases and oils.
    • Vehicles including fork lifts, trucks, etc., can spill oils and fuels.

    Any accidental spillage of oil or grease or intentional wash down water containing minor amounts of oils, greases, and detergents must be collected and treated before discharge to the river. These fluids along with any water leaks are collected in sumps in the dam and are regularly pumped out. In many cases, the volume of water is substantial.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you