Only show results in Virginia? Ok

water cost Applications

  • Premium

    Process water

    Process water is one of the most challenging for analysis instrumentation. Mostly this water is characterized by a certain purity, fluctuating loads, as well as very high salt concentrations. Since any disturbance in water-circuits can lead to an entire plant shutdown, resulting in huge costs, reliable and fast online water analyzers are an essential. Due to the diverse demands of various measurement challenges, application-specific analyzers provide huge advantages against standard analyzers that are used for every application.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Drinking Water

    Ensuring safe drinking water is a complicated and resource intensive process involving stringent state and federal requirements. Failures in the system are not only costly but can pose serious threats to public health. Pumping tests provide needed data to ensure proper flow and aquifer levels. With DriveConnect technology in place it is possible to significantly minimize expensive lift station drawdown testing.

    Drive‑Chat enabled solutions can reduce costs with automated alerts and remote anywhere anytime access.

    With Drive‑Chat you can:

    • Monitor every pump in the system
    • Efficiently control pumps
    • Check well health
    • Receive real-time alerts before major failures occur
    • Customize alerts per specified conditions

    By DriveConnect based in Brandon, FLORIDA (USA).

  • Premium

    Chemical Water Treatment for waste water

    Kurita develops products and solutions for the waste water treatment to improve the water quality and respect the legislation and the environment. Due to increased environmental sensitivity and today’s legislative restrictions, most industrial plants which use water already have wastewater treatment plants. The different Kurita Technologies carefully adapts to the needs of each plant through the optimization and improving the water quality and reducing your operating costs. Improve the water reuse in your facilities and work closely with our customers to reduce the discharges to a minimum level is one of our main targets.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment solutions for utility water treatment

    It makes economic sense to reuse process water. Why would you discharge water just because you`ve used it once? If this water is treated properly, it can be reused with ease, cutting costs in no time.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Water Disinfection for Drinking Water

    Superior Water Quality. Minimal Operating Costs. No Chemical Additives. The water treatment and water distribution up to the delivery point in the house is the responsibility of the water supplier. The owner of the real estate is responsible for sustaining the drinking water quality within the premise. REDO offers in the areas of drinking water supply solutions for the water supplier and solutions for the operators of commercial real estate. The main advantage of water disinfection from REDO: The REDO disinfectant solution in the drinking water is absolutely odourless and tasteless.

    By REDO Water Systems GmbH based in Groß-Zimmern, GERMANY.

  • Water Contamination Detection

    Security of water assets is becoming an increasingly major issue that demands immediate and robust alarms for potential contamination. In addition to this, natural growth of algae is a common problem for water asset managers, the results of which can increase maintenance costs of water processing plants as well as directly effecting water taste. The CTG FastGuard fast repetition rate fluorometer analyses information on the physiological state of the algae it monitors within an in-line flow system. A number of key parameters are monitored and analysed by the on-board embedded software, which instantly initiates both an audible and visual alarm on detection of a contaminant within the water system. The FastGuard is a robust low maintenance system which avoids false positives often provided by other contamination detection systems.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Industrial and commercial water filtration for potable water

    Potable water is water which is deemed safe enough for human consumption.  On a commercial basis potable water is also used for many other purposes than consumption such as vegetable washing or irrigation of landscapes.  Using potable water in this way can result in a large annual water cost to a company.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Ozone Water Treatment for Municipal Water Treatment

    Maintenance free and easy to operate ozone generators supplied by ozone generator manufacturer who knows ozone. Primozone is a modern ozone generator supplier who not only supplies ozone generators but also designs complete ozone water treatment systems. We know ozone and can be your partner in designing a complete and efficiently working ozone generator system for most municipal water treatment issues. The Primozone® technology allows for solutions that are cost effective. Our ozone generators produce a high concentration of ozone using a comparing low amount of energy, which makes the life cycle cost surprisingly low.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Wastewater treatment management for drinking water industry

    Water scarcity, aging infrastructure and increasingly stringent environmental regulations regarding disinfection byproducts and emerging contaminants are challenges facing municipalities around the world. Large cities, small cities, communities and water utility operators globally are seeking advanced, innovative and efficient drinking water treatment solutions. These solutions will assist them to meet the needs of an expanding population in a cost effective and sustainable manner while achieving increasingly tighter regulatory compliance.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Chemical Water Treatment for membrane treatments

    Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to run these plants under environmentally friendly and beneficial economic conditions. Special attention is given to an efficient utilization of energy as well as saving precious water. Kurita develops an efficient and effective treatment concept achieving an optimal economic operation and a maximum operational reliability of a plant.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Electrochemical solutions and water technologies for municipal water & wastewater

    With more than 50 years’ experience across a range of applications and technologies, De Nora Water Technologies delivers reliable, effective and easy to maintain disinfection and filtration solutions. Our renowned brands, such as TETRA, Capital Controls, ADVANCE, ClorTec, UAT, EST and UltraDynamics, combined with our comprehensive aftersales offering, ensure that our customers are set to meet their legal treatment requirements, all while minimising their operating costs. Our solutions for municipal water and wastewater treatment are broadly grouped in to three areas: Disinfection, Filtration and Aftersales

  • Premium

    Water Treatment Solutions for Iron & Manganese Removal

    For treatment of Iron & Manganese removal, AdEdge Technologies uses our AD26 or ADGS+ media coagulation filtration with ferric chloride as the coagulation agent. This process allows significantly higher flow rates per square feet of media, less backwash water than other conventional approaches, and smaller footprint systems which means lower capital and operating costs. There are no hazardous chemicals or waste involved and the systems may be automated which decreases operator involvement and expense.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Water quality monitoring systems for portable water plants

    Low maintenance and reliability are key requirements for analyzers in potable water plants. Cost of ownership is another big issue.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Aluminium coverage for potable water storage tanks

    Aluminum domes are the preferred cover for potable water storage tanks. Whether it is an above ground elevated water storage application, the aluminum dome is the most durable and lowest lifetime cost solution for thousands of water districts throughout the world. No other cover design has the corrosion resistant properties of aluminum domes which makes it ideal for tough outdoor environmental challenges.

    By CST Industries Inc based in Kansas City, MISSOURI (USA).

  • Filtration in waste water treatments. disinfection

    The cost and efficiency of the waste water treatment is directly linked to the amount of suspended solids in the water.
    The addition of an AZUD System allows:

    • Increased efficiency of the treatment equipment.
    • Decreases the quantity of chemicals used.
    • Avoids the “shadowing effect” created by larger particles in UV disinfection systems.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Drinking water analysis for municipalities

    GE Analytical Instruments offers several Sievers TOC Analyzer models designed specifically to simplify monitoring of drinking water treatment plants. Always knowing the TOC levels throughout a water treatment plant, and improving TOC reduction, can help a plant not only control DBPs, but also implement efficient and potentially cost saving treatment processes.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • QUA - Industrial Water Filtration

    QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your plant’s design economics & reliability reduce fouling simplify cleaning lower the total installed cost reduce the footprint of overall wastewater treatment. Committed to ongoing innovation, QUA manages the entire lifecycle & manufacturing chain of its products from the initial concept to manufacturing according to the most rigorous quality standards. QUA products are manufactured in a state-of-the-art membrane manufacturing facility with continuous online monitoring to main

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Wastewater monitoring for water treatment

    All of our systems are ready to use for Water and Wastewater management right out of the box. Backed by 24/7 support and over a decade of development and experience, our solution is generally 50% lower in capital expenses and up to 40% lower in life cycle cost than most offerings on the market. We offer a highly reliable system and a customized experience that will lower your control and monitoring costs.

    By Atookoo inc. based in Sherbrooke, QUEBEC (CANADA).

  • Premium

    Ultraviolet disinfection systems for the produced water treatment

    With environmental regulations becoming more stringent, and the link between re-injected water quality and operational costs becoming clear to operators, investing early in advanced water treatment solutions for produced water for both reinjection applications and environmental discharges is now a top priority for operators worldwide.  atg UV Technology have provided a number of specialist UV packages for the disinfection of Produced Water in order to reduce microorganisms such as SRB’s (Sulphate Reducing Bacteria), Acid Producing Bacteria and Slime Forming Bacteria, that if left untreated, pose a range of negative consequences including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection, Plugging of the well, Damage of equipment and components (e.g. RO membranes, filters).

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Industrial solutions for water reuse optimization

    Problem: With rising water costs, greater water scarcities and increasing environmental compliance regulations, reuse of water is becoming widely practiced in the manufacturing industry. For most industries, some form of treatment is required to ensure water meets standards for reuse.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you