Only show results in Virginia? Ok

water filtration technology Applications

  • Premium

    Chemical Filtration in Water for the Environmental Protection / Waste Water Technology

    In waste water treatment systems our membranes are used with great success for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Industrial Water Filtration

    QUA is a leading-edge developer and manufacturer of advanced membrane products, that are engineered with innovative technologies, and are used to treat challenging waters.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Environmental technology for droplet seperation industry

    As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

    By Körting Hannover AG based in Hannover, GERMANY.

  • Environmental technology for droplet seperation industry

    As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

    By Körting Hannover AG based in Hannover, GERMANY.

  • Membrane Filtration for Wastewater Treatment

    The essential challenges of today are to ensure cost effective treatment and recycling processes for water and wastewater. Membrane technology solves this task by being an innovative and trendsetting technology. Today membranes are successfully used for the treatment of municipal and industrial wastewater as well as for the production of drinking and process water from surface water. Membrane technology and membrane bioreactors (MBR) are especially important in arid zones for the recovery of clean water for reuse from wastewater. This enables the sustainable management of water resources ensuring availability and effective utilization.

    By MICRODYN-NADIR GmbH based in Wiesbaden, GERMANY.

  • Water filtration with UV purification for at home

    Liquid purity from point of use water systems. The water we and our children drink should be the most perfect on the planet. Liquid purity. Waterlogic POU (point of use) water dispensers give your family the freshest, healthiest, best-tasting water possible. And total peace of mind. Our innovative technology in point of use water cooler systems is now available in the home, with a range of sleek and stylish products offering the option of instant chilled, room temperature or sparkling water. Sitting next to the coffee maker, plumbed into the mains, our machines produce glass after glass of wonderful water. Sound good? It gets better. Banishing bottles saves money and reduces your carbon footprint, too. Start using a Waterlogic point of use water system in your home and office to make your contribution to natural resource conservation.

    By Waterlogic International Ltd based in Basingstoke, UNITED KINGDOM.

  • Premium

    Chemical Water Treatment for membrane treatments

    Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to run these plants under environmentally friendly and beneficial economic conditions. Special attention is given to an efficient utilization of energy as well as saving precious water. Kurita develops an efficient and effective treatment concept achieving an optimal economic operation and a maximum operational reliability of a plant.

    By Kurita based in Ludwigshafen, GERMANY.

  • Gas infusion technology solutions for the oxygen purifications

    The two essential building blocks of life are oxygen and water. Without them there would be no life. The principle ingredients of all Oxygen Pür Skin care products are purified water and oxygen. Our oxygen infused skin serums bring life and health to the skin and the underlying dermis. Oxygen Pür is an advanced tissue oxygen serum that provides transcutaneous (through the skin) transfer of oxygen into the dermis.

    By inVentures Technologies Incorporated. based in New Brunswick, NEW BRUNSWICK (CANADA).

  • QUA - Industrial Water Filtration

    QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your plant’s design economics & reliability reduce fouling simplify cleaning lower the total installed cost reduce the footprint of overall wastewater treatment. Committed to ongoing innovation, QUA manages the entire lifecycle & manufacturing chain of its products from the initial concept to manufacturing according to the most rigorous quality standards. QUA products are manufactured in a state-of-the-art membrane manufacturing facility with continuous online monitoring to main

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Industrial Meshes for Distillation

    In the demanding applications in distillation technology, i.e. the separation of high-molecular compounds, SolidWEAVE metal meshes are applied in structured mesh packs. Wire mesh packs with GKD filter meshes make delicate separation processes possible with low temperatures and short residence time – keyfactors for distillation process reliability.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Industrial water Nickel & Cobalt purification

    Cobalt is a brittle, hard transition metal with magnetic properties similar to iron. It is mainly used as an alloy with iron, nickel or other metals to produce corrosion and wear resistant products for high temperature applications (such as jet engines, gas turbines, etc.). Cobalt is normally produced as a by-product of nickel or copper mining. The purity requirements for Cobalt do not allow nickel to exceed a concentration 0.1%. Earlier, the nickel was removed by lime precipitations, but as the market specifications became more stringent, ion exchange technologies have been applied.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Membrane Filtration for Chemical Industry

    Membrane technology has made major progress in recent years and is nowadays the method of choice for many processes in the chemical industry, wherever substances are to be separated efficiently and gently. A prime example of this is dia-filtration, in which solutes and particles with higher molecular weights are retained while solutes with lower molecular weights are "washed" out of the process fluid.

    By MICRODYN-NADIR GmbH based in Wiesbaden, GERMANY.

  • Industrial water TOC and Color removal from water

    All surface waters contain varying amounts of naturally occurring organic acids. The most commonly encountered being tannic and humic. These substances have varying molecular weights and varying amounts of carboxylic functionality. There has been much interest in the removal of these substances from drinking water supplies due to their tendency to form THM`s when chlorinated. They can be removed effectively by use of anion exchange resins operated in the chloride cycle. Because the organics can be removed by regeneration with brine, this technology is far most economical.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Equipment

    Omnitec Design manufactures negative air machines, scrubbers, moisture extractors, heaters, pressure monitors, and water filtration equipment used by abatement and restoration contractors, health care facilities, in industrial and commercial applications and a wide range of environmental cleanup projects. Our equipment combines the best technologies available for HEPA air filtration, control of VOCs, odor and biological contaminants and heaters for structural drying and sanitizing. Our mission is to provide high quality and reliable filtration equipment. Our equipment is used for Abatement, Remediation, Construction and renovations, labs and healthcare facilities, and more. When you purchase our equipment you will receive not only a quality product, built in the USA, but also our customer service which is the best in the industry. By purchasing our filtration, dust collecting, and purifying equipment, to will receive from Omnitec our complete support. Breathe easy.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Water filtration systems for heap leaching in the mining industry

    AZUD solutions to heap leaching in the mining industry. The more than 30 years of experience as manufacturers of emitters and filtration systems have permitted the adaptation of our products to the requirements of the mining sector. We have developed lixiviation projects of materials such as gold, silver, copper, nickel or zinc in Europe and South America. AZUD technology gives value-added in the lixiviation processes, maximizing the extraction of the pile.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Premium

    Electrochemical solutions and water technologies for municipal water & wastewater

    With more than 50 years’ experience across a range of applications and technologies, De Nora Water Technologies delivers reliable, effective and easy to maintain disinfection and filtration solutions. Our renowned brands, such as TETRA, Capital Controls, ADVANCE, ClorTec, UAT, EST and UltraDynamics, combined with our comprehensive aftersales offering, ensure that our customers are set to meet their legal treatment requirements, all while minimising their operating costs. Our solutions for municipal water and wastewater treatment are broadly grouped in to three areas: Disinfection, Filtration and Aftersales

  • Industrial water Zinc recovery from pickling acid solution

    The zinc chloride is to be removed from pickling acid at 6N concentration. Under these conditions, the ZnCl2 will form a stable complex and may be removed by PuriTech`s ION-IX technology using an anion resin. The resin is then eluted with water.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Electrochemical solutions and water technologies for mining

    Winning with electrode design to reduce energy costs in traditional processes and UAT Reverse Osmosis (RO) Membrane Filtration Systems to meet any tap or brackish application need. Nickel and cobalt production,  precious  metal refining (gold, silver), recovery of copper from bleed streams or valuable metals from industrial wastewater, are some of the applications of our titanium DSA® anodes.

  • Filtration systems & solutions for energy sector

    Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience and extensive product range ensures we can supply a fully engineered tailored solution for every application.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Sludge - slurry dewatering solutions & filter press technology

    DIEMME Filtration has the correct solutions for all problems of slurry - sludge dewatering, because every DIEMME FILTRATION filter press, is projected in connection with the chemical physical characteristics of the sludge.

    By Bilfinger Water Technologies GmbH based in Aarbergen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you