Only show results available in Virginia? Ok

water flow rating Applications

  • Premium

    Water accountability portable monitoring for solving flow rate mystery

    The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Water Monitoring and Flow Measurement Systems for Hydrology

    In recent years acoustic flow measurement and flow metering has established itself as the standard method for measurement in many hydrological stations but is also used as the basis for various applications, for example for flood protection and flood forecasting. Ultrasonic flow meters are also used in hydro-engineering constructions. With this almost contact free technology data can be recorded continuously and it provides 24/7 monitoring. Such flow monitoring is particularly important in waterways used for shipping, transportation, irrigation, drainage and for cooling water extraction of power plants. A further important use of transit-time open channel flow meters is the transportation of water used for the supply of drinking water. Here the focus lies on detecting the flow rate of water loss at an early stage as it is sometimes difficult to detect small leakages.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Area-velocity flowmeter for sewage lagoon discharge flow monitoring

    The Township of South Glengarry installs a new Greyline AVFM 5.0 Area-Velocity Flow Meter to measure continuous discharge from their municipal sewage lagoon. The sealed ultrasonic sensor is mounted in a horizontal 12` PVC pipe. The AVFM replaced a magnetic flowmeter that was unable to measure seasonal low flow rates.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Differential level transmitter for VFD pump control & flow measurement

    An Ontario municipality deploys Portable flowmeters to solve flow rate discrepancies between sewage pump station effluent and lagoon influent flowmeters. Faced with suspension of construction permits due to flow rate uncertainty, the Township of North Glengarry called on Greyline Instruments to help troubleshoot two permanently installed flow meters.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Precision liquid flow sensor measurement technology

    Accurate liquid flow sensor measurement can reduce water bills, determine leakage rates, and increase system efficiency. Solve accurate water and industrial liquid flow measurement requirements with clamp-on or insertion ultrasonic flow liquid flow meters featuring precision sensing elements or our complete line of multivariable mass vortex meters.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Water Contamination Detection

    Security of water assets is becoming an increasingly major issue that demands immediate and robust alarms for potential contamination. In addition to this, natural growth of algae is a common problem for water asset managers, the results of which can increase maintenance costs of water processing plants as well as directly effecting water taste. The CTG FastGuard fast repetition rate fluorometer analyses information on the physiological state of the algae it monitors within an in-line flow system. A number of key parameters are monitored and analysed by the on-board embedded software, which instantly initiates both an audible and visual alarm on detection of a contaminant within the water system. The FastGuard is a robust low maintenance system which avoids false positives often provided by other contamination detection systems.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Customized Solutions for surface water treatment industry

    WesTech offers a holistic approach to surface water treatment for potable use. Depending upon the raw water quality, the flow rate, and operational preferences, WesTech can provide conventional flow, combination treatment units, packaged systems, high-rate processes, or even customized solutions.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Water Treatment Solutions for Iron & Manganese Removal

    For treatment of Iron & Manganese removal, AdEdge Technologies uses our AD26 or ADGS+ media coagulation filtration with ferric chloride as the coagulation agent. This process allows significantly higher flow rates per square feet of media, less backwash water than other conventional approaches, and smaller footprint systems which means lower capital and operating costs. There are no hazardous chemicals or waste involved and the systems may be automated which decreases operator involvement and expense.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Disposal and Cleaning Equipment for Waste Water Industy

    Drinking water is not the only area requiring flow monitoring. The disposal and cleaning of waste water also requires flow meters. Waste water used to be dumped directly into the soil or an open channel. As awareness has increased, most discharges are now treated to assure long term sustainability. Modern water treatment plants are highly complex systems that require the use of flow sensors to monitor flow velocity in open channels for waste water discharge. Likewise facilities for waste water collection and clarification plants need regular data on flow rate. The use of radar non contact flow measurement and ultrasonic doppler flow meters are particularly efficient. HydroVision can complete flow measurements in all of these areas.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Dye Tracing

    Monitoring the dilution and movement of a tracer introduced into the water column provides an excellent means of determining the path that may be followed by a discharge and the rate at which dilution is likely to take place. Fluorescent dyes such as Rhodamine, Fluorescein or Agma are the most frequently used tracers for such investigations. Chelsea Technologies has been providing dye tracing systems for over 30 years. Typical applications include sub-sea pipeline leak detection, pollution studies, natural water flow analysis (rivers, lakes, ocean currents, cave water flows, groundwater filtration etc), sewer and storm water drainage analysis. The Chelsea systems can be configured for a wide variety of tracers, are highly sensitive, robust, and deliver real-time data. They can be moored, profiled, towed or affixed to ROV / AUV platforms.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • EDI Solutions

    QUA’s FEDI® (Fractional EDI) stacks have superior hardness tolerance compared to the other EDI products on the market. With a dual voltage process this allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant's design economics and reliability. FEDI stacks are available in three different models which can be applied either for higher hardness tolerance or high water flow rates. MEGA FEDI stacks are ideal for large capacity, high flow systems normally required in heavy industrial projects such as power, petrochemicals, & electronics for high purity water needs. Each stack can handle treated water flow of up to 75 GPM . MEGA FEDI’s unique stackable design minimizes piping, reduces footprint, and makes it simple and easy to install on skids. FEDI-Rx products are specially designed for applications in pharmaceutical, biomedical and laboratory applications where installations require hot water sanitization to meet

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Landfill leachate wastewater treatment

    Landfill leachate is the runoff water that occurs from operational or closed landfills. This water flows at lower rates on dry days when naturally occurring moisture percolates out and at higher rates on rainy days when the leachate waters are combined with stormwater.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Automated solutions for the wastewater treatment pond / lagoon / plant dredging

    LWT’s dredging systems can be used for wastewater treatment plant, pond, lagoon dredging applications. Complete automated remote controlled dredging systems result in increased plant efficiency, and accommodate increased plant flow. One of the keys to successful automated controls is the ability of the dredge system to feed a constant percentage of solids to the pressing plant, using in-line density and flow meters to allow the operators to dial in the desired rate of solids.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Wastewater treatment for the paper sector

    Paper companies consume large amounts of water in the production process and hence, produce high dumped flow rates. This type of industry also tends to produce the development of filamentous bacteria. The effluent to be treated from wood industries has high loads with elevated solid matter content.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Constant Pressure pump control valves

    For use with water well pumps and booster pumps, the Cycle Stop Valve (CSV) turns any pump into a variable flow, constant pressure system. Working in conjunction with a small pressure tank, the CSV is usually adjusted to the middle of the pressure switch range. IE; 40/60 PSI switch, 50 PSI CSV. The size of the pressure tank determines how much water can be used by the house, before the pressure drops to 40 PSI, and the pressure switch starts the pump. As long as flow rates in and around the house vary from 1 GPM to as much as the pump can produce, the CSV maintains a constant 50 PSI on the system. When there is no more flow required for the house, the CSV allows the little pressure tank to fill to 60 PSI, and the pump is shut off by the pressure switch.

    By Cycle Stop Valves, Inc. based in Lubbock, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you