Only show results in Virginia? Ok

water industry news Applications

  • Premium

    Online Monitoring for the Drinking Water Industry

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards.

    On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Strategic market research solutions for water & wastewater industry

    Water industry professionals worldwide rely on PennWell’s Water Group to provide the latest news, case studies, products, and technology information impacting the water and wastewater industry. Featuring leading industry publications and dynamic ancillary products and services, PennWell’s Water Group blankets the water market with comprehensive coverage of the changes of today and the advances of tomorrow.

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Microbial testing for biological wastewater treatment industry

    Realize a new level of process stability and efficiency! Wastewater operators have traditionally had no choice but to rely on TSS or VSS measurements to quantify biomass in their process. These measurements detect much more than just living biomass and therefore are inaccurate and unresponsive indicators of the living population.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • EHS & sustainability solutions for the shipping & transportation industry

    Market trade and financial intelligence for ships, ports, aircraft, airports, railways and urban transport systems worldwide. For decades, EHS and sustainability professionals at IHS have served all kinds and sizes of organizations, worldwide. We pioneered the development of many sustainability information management solutions and continue to lead the way with new innovations.

    By IHS based in Englewood, COLORADO (USA).

  • GIS software for marine and coast industry

    New geographic information system (GIS) technology tools enable you to better understand and represent the systems at work in the seas and oceans. From the coastal shoreline to the bathymetric bottom, marine GIS has been adapted and implemented to help you achieve your goals in coastal zone management, research, ocean industries, and navigation.

    By Esri based in Redlands, CALIFORNIA (USA).

  • Marine envrionmental solutions for port & harbour industry

    Fugro EMU Limited provides a wide breadth of services to clients working with ports and harbours. Fugro EMU has considerable experience and knowledge in this sector across the UK and overseas and has provided marine consultancy and survey support for: Development of New Facilities, Monitoring of Existing Developments, Operation and Maintenance Projects.

    By Fugro EMU Limited based in Portsmouth, UNITED KINGDOM.

  • Water treatment research for oil and gas industry

    The upstream oil and gas industry is increasingly becoming a water management industry. Globally, three barrels of water is extracted for every one barrel of oil produced. With effective management, this produced water can become a source of value, as disposal options become limited and environmental regulations tighten. New water treatment technologies will allow this water to be reused in waterflooding, enhanced oil recovery and hydraulic fracturing operations, in a market worth $5.2 billion in 2014. Managing the water used and extracted from unconventional resources, such as shale gas, tight oil, coalbed methane, heavy oil, and oil from ultra-deepwater offshore fields, will be a fast growing segment of this market. This section shows you in detail the different opportunities and strategies for these resources.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Premium

    Industrial

    We have a specialist range of skimmers and systems to suit the requirements of the industries, including in-tank skimming. The removal of oil and chemicals from water within the industrial environment is a key requirement – not only due to increased legislation but also because it is considered a dependable and cost effective way to achieve the desired level of water purity. It can also increase the efficiency of existing installations, such as large scale API oil-water or parallel plate separators, without the need for expensive capex expansions or new builds. The DESMI skimmers are typically manufactured from high nickel alloys to resist ‘sour’ applications and can be hydraulic, air or low voltage drive. In applications that require ATEX or equal qualification, we can satisfy this requirement.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Water & Waste Water LIMS Solutions

    Water testing laboratories and laboratories that support water treatment plants have long discovered the benefits of Laboratory Information Management Systems - LIMS. Today many are looking to replace earlier systems with a system that is easier to support, has a proven upgrade path and is highly flexible and configurable. These laboratories as well as new facilities being commissioned will benefit by installing a user specific configuration from the very successful Autoscribe Matrix LIMS software designed specifically for the water and waste water industry.

    By Autoscribe Informatics based in Reading,, UNITED KINGDOM.

  • Water treatment system for rain water and storm water

    Through our SkyHarvester Water Conservation Systems division, Watertronics offers a single-source solution for commercial, industrial and municipal water harvesting systems at new or existing sites. Our design and engineering group will work hand-in-hand with your architect or engineer to provide integrated custom solutions to harvest, store, treat, pump and control the distribution of harvested rain water.

    By Lindsay Corporation based in Omaha, NEBRASKA (USA).

  • Pulsair`s diving bubbler system for swimming pool industry

    The Pulsair SoftWater Landing System is designed to help divers learn new dives faster in a safe environment by providing a soft water landing below springboard and platform dive stations.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Premium

    Sustainable solutions for education industry

    In research and teaching, integral consideration and analysis belong to the important applied methods in various areas. Life cycle analysis and their methodic development, greenhouse gas calculations as well as new upcoming topics like water footprints are types of problems, which are not only in industry-oriented research of great significance.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    Mining & minerals solutions for coal preparation industry

    WesTech designs and manufactures thickeners for the coal prep industry for product concentration, tailings disposal and CCD circuit washing, including HiFlo Thickeners and Deep Bed Paste Thickeners. Paste thickening is a proven technology increasing the profitability of mining operations. In the coal preparation plant there are two applications for paste thickening: concentrating fine coal and producing paste from coal tailings for increased water recovery and elimination of tailings ponding. Paste thickeners recover the maximum water possible from tailings streams. Tailings disposal sites have a longer life and the land can be reclaimed faster and easier. New tailings disposal sites can be smaller and significantly less costly.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Waste water respirometry solutions for toxicity reduction tests

    In industrial manufacturing companies, before a new process comes on-line, it is important to measure the toxicity of the effluent stream. This is especially the case for companies who treat their own waste. From the toxicity value (EC50) obtained, it may be a cost-effective solution to simply discharge the effluent to the treatment works at a slow and defined rate to minimise damage to the activated sludge. Following a period of acclimatisation it is often possible to increase feed rates to the plant and this can again be managed using the Strathtox Respirometer. An alternative approach is to undertake toxicity reduction procedures, such as neutralisation or acid hydrolysis, in pilot-scale laboratory studies. The Respiration or the Nitrification Inhibition Test may be used for this. In the future, toxicity reduction may be stipulated by local authority, water company or publicly-owned treatment works prior to giving discharge consents. Toxicity reduction may be evaluated using toxicity tests on activated sludge provided by the treatment works.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Sewer Piping Systems

    Whether the project calls for a sanitary or industrial sewer relining, sewer cleanout or installing new sewers, ISCO has the solution. Pipe offered by ISCO Industries for sewer applications includes HDPE pipe, PVC pipe, ductile iron pipe and profile pipe. ISCO Industries offers you solutions that are economical, durable, long-lasting and easy to install.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Flaring Solutions for the Landfill Industry - Leachate Evaporation

    Increased concern for the environment has led to new opportunities for landfills to better manage their waste gas. ABUTEC works with the landfill industry to ensure that leachate evaporation is handled in the most efficient way possible. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning landfill waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. When combined with a heat exchanger, the unit can efficiently evaporate the leachate eliminating the need for expensive trucking or disposal.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Waste water respirometry solutions for toxicity testing

    If industrial wastewater entering a treatment works contains toxic components the rate of biodegradation will be inhibited or stop completely. This can result in failed consents and will certainly give rise to operational problems. Visible indications include deflocculation, bulking and the appearance of filamentous bacteria. Sometimes, there are no visible effects. When the sludge bacteria are inhibited, there is the possibility of toxicity carryover in the effluent that is discharged to receiving waters. With new environmental legislation being introduced, worldwide, to protect the natural environment, toxin discharge is now a serious concern for treatment plant managers.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Premium

    Air pollution control for the natural gas processing industry

    The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Water Disinfection for Aircraft

    Drinking Water Treatment and Disinfection for the Transport Industry Even Airbus, the world’s largest aircraft manufacturer implements the REDO technology. Prior to delivering the new aircrafts, all of the drinking water pipelines are disinfected with the REDO Technology. Then the water tanks are filled with disinfected water from a REDO unit. A significant advantage is the enormously reduced service time, in comparison to alternative methods. In addition, one profits from a better work-flow and last but not least, from the guarantee of maximum safety – there are no hazardous potentials with the REDO Technology.

    By REDO Water Systems GmbH based in Groß-Zimmern, GERMANY.

  • Liquid Level Contents Gauges -

    Gauges for the Ship Building & Offshore Industries We have the following Liquid Level Contents Gauges For Ship Building & Offshore use, the G35 and G31 models meet the requirements for SOLAS for use with flammable liquids, they are type approved by Lloyds, DNV and Rina amongst others. G35 Seemag- Magnetic Gauge: Approved for use on flamable Liquids G31 Seeflex - Reflex Gauge : Approved for use on flamable Liquids G21 Marine - Tubular gauge G20 Admiralty - Tubular gauge G22 Quickmount -Tubular gauge G34 Quickflex - Reflex Gauge - We have a new brochure detailing our range of products for the marine & shipbuilding industry. View/Download this brochure: http://www.seetru.com/datasheets/gauges/Seetru_Marine_Gauge_Brochure.pdf

    By Seetru Limited based in Bristol, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you