Only show results available in Virginia? Ok

water innovation Applications

  • Innovative Pump Technology for Water and Wastewater Treatment

    EDUR pumps have been used preferentially in municipal and industrial water supply and water treatment for decades. Traditionally the reasons are the sturdiness and the long service life of our pumps and the special capability of some models for transporting liquid-gas mixtures.

  • Innovative Pump Technology for Ship Industry

    In shipbuilding, high standards of reliability as well as increasingly the energy efficiency of the systems are important prerequisites for the economical-technical overall evaluation in the technical procurement process. Ships as self-sufficient systems are particularly dependent on the reliable functioning of all installed components, including the pumps. They fulfil many tasks on board which are vital for the operation of the vessel: Delivery of ballast water and wastewater, boiler supply, condensate recovery, drive engine cooling and of course the reliable supply of fire fighting systems.

  • Innovative Pump Technology for Cooling and Refrigeration Industry

    Transporting cold liquids in cooling and refrigeration systems places high requirements on the pump used. For reliable, constantly high pump performance the pump has to be designed accordingly, dimensioned specifically for the application and fitted with special equipment for the low temperatures.

  • Innovative Pump Technology for Industrial Engineering Industry

    Reliably delivering liquids in different states for various tasks with high efficiency – technical, economical and energy saving. EDUR have held a leading position in this field over decades.

  • Innovative Pump Technology for Process Engineering Industry

    Modern process engineering in different industries provides a variety of applications for EDUR pump systems. In all cases it becomes evident that the issue of energy efficiency and the required optimum design of the pump system deserve great attention.

  • Mixers, dryers, innovative solutions for starch industry

    Chemically modified starches (from potatoes, corn, tapioca, wheat, peas, and others) are used in papermaking, among other applications, to improve paper strength. The wet process is used most frequently in this case. The starch is slurried in water, then the cationizing agent is added to cause it to react. The starch remains in a suspension throughout the entire process until drying. However the drying method is more economical. In this process, natural starch powder is intensively mixed with the cationizing agent. The etherification reaction then takes place in a reactor. The reactor is connected downstream to a second neutralizing mixer. The starch consistency remains powdery throughout the process.

    By AVA GmbH u. Co. KG based in Herrsching, GERMANY.

  • Water Recycling / Water Reuse

    QUA is a leading-edge developer and manufacturer of advanced membrane products. These are engineered with innovative technologies, which are used to treat challenging waters. QUA is leveraging its deep roots in R&D, the expertise of staff that is highly experienced in water treatment technologies to become a global technology leader in the development of products for water and wastewater treatment applications.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Industrial water softening

    The presence of certain metal ions in water causes a variety of problems. These ions interfere with the action of soaps, lead to build up of limescale, which can foul plumbing, boilers, heating equipment. Water softening is the removal of calcium, magnesium, and certain other metal cations in hard water. The resulting soft water extends the lifetime of plumbing and heating equipment. Softening of low TDS ( Total Dissolved Solids ) water is done commonly with a Strong Acid Cation ( SAC ) exchange resin operating in the sodium form and regenerated with brine. PuriTech`s latest development is a very performant continuous ion exchanger, based on PuriTech`s innovative ION-IX technology which is based on true counter-current ion exchange.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Industrial Water Filtration

    QUA is a leading-edge developer and manufacturer of advanced membrane products, that are engineered with innovative technologies, and are used to treat challenging waters.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Water Recycling / Water Reuse

    QUA is a leading-edge developer and manufacturer of advanced membrane products. These are engineered with innovative technologies, which are used to treat challenging waters. QUA is leveraging its deep roots in the expertise of staff that is highly experienced in water treatment technologies to become a global technology leader in the development of products for water and wastewater treatment applications.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Chemical Water Treatment for boiler water & heating systems

    In nearly all industrial areas steam is needed for different aims e.g. steam for process side, heating purpose or the generation of electricity. To reach the best efficiency of the boiler system an optimal boiler water treatment is essential. Disturbances in boilers caused by deposits, scaling, corrosion, local overheating or carryover into the steam reduce the operating safety and could lead to tremendous economic damages. Kurita delivers innovative technologies to prevent scale and corrosion in the whole boiler system - feed water tank, boiler, steam and condensate system.

    By Kurita based in Tokyo, JAPAN.

  • QUA - Industrial Water Filtration

    QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your plant’s design economics & reliability reduce fouling simplify cleaning lower the total installed cost reduce the footprint of overall wastewater treatment. Committed to ongoing innovation, QUA manages the entire lifecycle & manufacturing chain of its products from the initial concept to manufacturing according to the most rigorous quality standards. QUA products are manufactured in a state-of-the-art membrane manufacturing facility with continuous online monitoring to main

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Continuous Monitoring of Surface Water

    The Sorbisense method is especially suitable for measurements in dynamic environments. For example, in rivers, streams and lakes.

    The method is innovative and allows you to implement continuous and cost effective measurements in both urban and in rural areas. For example, measuring the leaching of nutrients from the cultivation of wetlands and measuring water quality in rainwater and sewage.

    By Sorbisense A/S based in Tjele, DENMARK.

  • Cavity pump for water and wastewater industry

    For more than 75 years, Moyno progressing cavity pumps have been successfully applied and widely used in the industrial and municipal wastewater treatment industry. Over the years Moyno has continually enhanced the design and operational performance of its products to innovate wastewater treatment solutions. Moyno provides an effective combination of products, process solutions and service support programs to keep plant operations running smoothly and efficiently with little downtime and minimal maintenance. Moyno also provides a broad offering and custom product design capabilities for critical application requirements.

    By Moyno, Inc. based in Springfield, OHIO (USA).

  • Advanced Ultrafiltration Modules

    The Q-SEP Ultrafiltration membranes incorporate high-strength, hollow fibers that deliver superior performance without the risk of fiber breaks. They are made from a hydrophilic polyether sulfone material with excellent low fouling characteristics. These hollow fiber membranes operate under a pressurized inside-out flow configuration for superior performance. These hollow fiber UF membranes offer reliable removal of turbidity, microorganisms & viruses. Turbidity can be reduced to less than 0.05 NTU. Typically, a 6-log removal for bacteria, giardia & cryptosporidium, while a 4-log removal for viruses, can be achieved. The Q-SEP modules contain an advanced UF fiber, prepared by an innovative patented cloud point precipitation method. This method ensures a very uniform pore size distribution and high pore density in the membrane. As a result, the product water quality from the modules is significantly better than the quality from conventional UF modules at a very operating pres

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Meliadine mine waste water bioremediation

    We have been approached by the Company H2O Innovation Inc. to supply bugs for the start up of a membrane reactor. Meliadine mine is located in Nunavut in the remote northern part of Canada. Membranes bioreactors are very fragiles during start up. If the bacterial biomass is not properly set. Quick TMP (Trans Membrane Pressures) may arise following the plugging of the membranes pores. When such a project is being conduced in very sensitive and remote locations, there is no room for errors. Costs can pike so fast making the company loose benefits and image. They rely on Probiosphere archaea product to make sure the startup is safe, fast and effective for the benefits of all the actors involved. https://www.agnicoeagle.com/English/operations-and-development-projects/development-projects/meliadine/default.aspx

    By Probiosphere Inc. based in Riviere-Du-Loup, QUEBEC (CANADA).

  • Premium

    Solutions for Stormwater management

    Invisible Structures, Inc. is dedicated to providing a TOTAL STORMWATER MANAGEMENT system for your site. Our products offer economical and innovative solutions to meeting your NPDES Phase II and local requirements. Our product line will not only make post-development stormwater runoff equal to pre-development runoff, we will enhance the quality of stormwater by filtering and removing pollutants.

    By Invisible Structures, Inc. based in Golden, COLORADO (USA).

  • Premium

    Solutions for the wastewater sector

    Conventional wastewater treatment systems are focused on efficient removal of polluting components. This is commonly done through aeration and separation of formed biomass from the cleaned water. After treatment the water would be discharged onto surface waters or subsoil irrigation. Introduction of polishing steps after these treatment systems opened up the possibilities to reuse water for either irrigation or even potable water. DMT Environmental Technology also implements these solutions with its MemBioRex membrane bioreactor. Nowadays novel technologies enable reuse of saline water within industries such as unconventional oil and gas, industry, agriculture, and mining. DMT Water Technology develops and realises innovative products to enable our customers to meet these challenges.

    By DMT Environmental Technology BV based in Joure (NL), NETHERLANDS.

  • Membrane Filtration for Wastewater Treatment

    The essential challenges of today are to ensure cost effective treatment and recycling processes for water and wastewater. Membrane technology solves this task by being an innovative and trendsetting technology. Today membranes are successfully used for the treatment of municipal and industrial wastewater as well as for the production of drinking and process water from surface water. Membrane technology and membrane bioreactors (MBR) are especially important in arid zones for the recovery of clean water for reuse from wastewater. This enables the sustainable management of water resources ensuring availability and effective utilization.

    By MICRODYN-NADIR GmbH based in Wiesbaden, GERMANY.

  • Water filtration with UV purification for at home

    Liquid purity from point of use water systems. The water we and our children drink should be the most perfect on the planet. Liquid purity. Waterlogic POU (point of use) water dispensers give your family the freshest, healthiest, best-tasting water possible. And total peace of mind. Our innovative technology in point of use water cooler systems is now available in the home, with a range of sleek and stylish products offering the option of instant chilled, room temperature or sparkling water. Sitting next to the coffee maker, plumbed into the mains, our machines produce glass after glass of wonderful water. Sound good? It gets better. Banishing bottles saves money and reduces your carbon footprint, too. Start using a Waterlogic point of use water system in your home and office to make your contribution to natural resource conservation.

    By Waterlogic International Ltd based in Basingstoke, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you