Only show results in Virginia? Ok

water locating Applications

  • Vacuum excavation solutions for locate underground utilities / soft dig / pot holing

    Vacuum excavation is fast becoming a best practice in the field of construction and site excavation. Why? Because it uses jets of air (air excavation) or water (hydro excavation) to loosen soil, instead of a heavy metal claw. After loosening, the soil is pulled out of the ground through an air vacuum hose to a debris tank for later disposal or back-filling. Using non-destructive technology can quickly, safely and economically excavate in areas inaccessible to conventional digging equipment like backhoes and trenchers.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Water Quality in watersheds

    Metro Vancouver serves an area of 282,000 hectares (approximately 1,088 square miles). The drinking water supplied to the 2.3 million residents of this growing community is sourced from three major reservoirs – Capilano, Seymour and Coquitlam. These vast watersheds, located in the mountains north of Vancouver, gather billions of gallons of snowmelt and rainwater. From these reservoirs, the water is treated and filtered to remove turbidity and potentially harmful micro-organisms ensuring quality drinking water is available to homes throughout the Metro Vancouver district.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Premium

    Wastewater Testing for the the Water Treatment Industry

    There is strict regulation surrounding waste water discharge so it’s very important to conduct waste water testing in waste water environments. Aquatic ecosystems are sensitive to even small changes in the chemical make up of the water, temperature, etc. Water parameter testing before discharge allows any pollutants to be detected and prevented from entering the watercourse. Real time testing allows quick action and minimises the risk of any potential fines that might be imposed by regulatory bodies should there be any regulatory violations. The rugged AP-2000 protects the electrodes during deployment and allows all the essential parameters to be tested while it’s portable design means that the device can be easily carried between locations. You can also save money on site visits by using telemetry.

    By AQUAREAD Limited based in Broadstairs, UNITED KINGDOM.

  • Microbial testing for water treatment industry

    Why wait until tomorrow to know today`s water quality? How clean is your water? Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water distribution systems and aids with disinfection and flush cycles. LuminUltra`s QGA test is the ideal tool to help save time & money and reduce risk in water treatment and distribution!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a wastewater treatment plant. An important feature of any FOG program is locating and monitoring high oil and grease producing industries and food service establishments. InfraCal TOG/TPH Analyzers provide a simplified procedure for FOG analysis based on solvent extraction and infrared absorption which can give the regulator or operator an on-site result in less than 10 minutes.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Wireless multiple parameter monitoring

    Monitoring multiple sensing points including fill level, pH, conductivity, and flow—often from varied locations in a large water treatment plant—can be a challenge. With four analogue inputs, a single SureCross Node can easily centralize and transmit critical monitoring information from multiple Sensors or controllers. Banner’s unique power management capability enables a single Node equipped with a FlexPower™ optimized QT50U or T30UX ultrasonic analogue sensor (level detection) to operate for years on a single DX81 battery power supply.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Microbial testing for industrial process water sector

    Real-time Information for Same Shift Problem Solving! Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s QuenchGone21 Industrial (QG21I™) test kit instantly measures the total microbiological content in industrial process waters to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing process water systems and aids with disinfection and cleaning cycles. LuminUltra`s QG21I test is the ideal tool to help save time & money and reduce risk in industrial process water management!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • REPLACING WATER SOFTENER WITH GREEN SCALEWATCHER WATER CONDITIONER

    Roper’s Restaurant, a cowboy themed restaurant in Albuquerque, New Mexico has replaced its water softener with the computerized, electronic, water-conditioner Scalewatcher from Scalewatcher North America. By installing Scalewatcher, the restaurant has avoided paying the $500 quoted for replacement media for its old water softener and also saved hundreds of dollars a year in salt and water thereby providing Roper’s with a short-term payback on the unit. Roper’s Restaurant, part of Outwest Eateries LLC dba, is located in a hard water area. This necessitated Bryce Chant, owner of Roper’s Restaurant using a water softener to prevent scale formation in the kitchen. “When I was given the price to repair our old water softener, I decided to install the Scalewatcher from Advance Plumbing”, said Bryce Chant of Roper’s Restaurant. We have had great success with it. Even though we had a water softener we still had hard water scale and a white ‘film’ in the dishwasher. Now with Scalewatcher that scale and ‘film’ has disappeared.” The average restaurant consumes 5,800 gallons of water daily, with 50% being used in the kitchen. If not properly treated, hard water can drain a restaurant’s bottom line due to the early renewal of capital equipment such as water heaters, boilers, coffee makers, dishwashers, steamers and other water-fed equipment. Hard water contains calcium carbonate that adheres to heating elements and the internal surfaces causing scale buildup that impairs efficiency. The limescale that deposits on the heating element will, if untreated, reduces efficiency, induces corrosion of the element and ultimately lead to appliance failure. In addition in restaurants, hard water also necessitates the use of additional detergents. In fact, for every additional grain of hard water, detergent use increases by between 2% and 4% per 1,000 gallons of water used. Many restaurants, like Roper’s use a water softener to reduce limescale. However, water softeners use copious amounts of both water and salt, which are expensive to buy and salt is also bulky to store. In addition, in many States now, including Southern California, municipalities and water departments are severely limiting, and in some cases prohibiting, the use of salt-regenerating water softeners due to concern regarding the increased levels of salt in ground water. The award-winning Scalewatcher system not only helps restaurants meet these regulations by minimizing salt usage but also saves money on salt purchase and has the additional benefit of removing scale from water-fed equipment. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “We are saving money each month because we do not have to purchase salt for the water softener and we are not dumping salt filled water down the drain because there is no brine process with Scalewatcher”, said Bryce Chant. “Living in New Mexico with our drought situation, I hated knowing all that water was being wasted. Scalewatcher is a truly ‘green’ technology that we are happy we have implemented”. Roper’s Restaurant has been so impressed with the Scalewatcher technology that the managers have bought units for their homes and have recommended it to family and friends. Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Premium

    Odor control for wastewater treatment processes

    Natural odor control for wastewater treatment processes. Industrial and municipal wastewater treatment generates odors that can be strong, persistent, and a nuisance to employees, residents, businesses, and industries located near the wastewater treatment plant.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • ALBUQUERQUE RESTAURANT EXCHANGES WATER SOFTENER FOR GREEN SCALEWATCHER WATER CONDITIONER

    Zorba’s Fine Greek Restaurant in Albuquerque, New Mexico, has saved money on water, maintenance and salt by replacing its water softener with the computerized, electronic, water-conditioner Scalewatcher® from Scalewatcher North America. Three months after installing Scalewatcher, the restaurant was able to remove its bulky water softener but still retain the benefits of soft water. Owned and run by Spiros and Marina Counelis, Zorba’s is not only located in a hard water area but also in a region where water conservation is a major priority for the local water authority. Customers are encouraged to implement water saving strategies which the water authority rewards with rebates. “Abuquerque has hard water, which resulted in our having an awful time keeping our dishes from spotting and having a cloudy appearance after they ran through the dish washer”, said Spiros Counelis. “We decided to install a conventional water softener but our water bill jumped considerably and we had constan

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Gravity Main Sulfide Odor Control with Hydrogen Peroxide

    Gravity main sewer systems include major trunk lines and the tributaries that feed them. Hydrogen sulfide (H2S) odor builds up in the collections system as the flows collect from upstream reaches and become larger, deeper and more septic (oxygen depleted) in the downstream reaches more near to the wastewater treatment plant. In general, most of the more significant hydrogen sulfide odor and corrosion control problems occur in the major trunk systems segments conveying flow to the plant. Therefore, selection of sulfide treatment for gravity systems has several options depending mainly on: Duration of control required Degree of septicity (oxygen depletion) Location of target control points or "hot spots" Location of available dosing points upstream of "hot spots" Availability of civil infrastructure and utilities Sensitivity to hazardous chemicals

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Force Main Systems Sulfide Odor Control with Hydrogen Peroxide

    Force main systems are typically high sulfide odor generators due to septicity conditions related to full pipe flow and a greater anaerobic slime layer (biofilm) thickness. Primary factors that influence sulfide loading generation in a force main include sewage temperature, BOD, retention time, pipe size and flow. Gaseous hydrogen sulfide (H2S) release at the force main discharge is usually the main concern related to odor and corrosion control needs; however, corrosion problems within the pipe can be of a concern (e.g. "crown cutting") at locations where air pockets can lead to concentrated H2S gas build up. Some basic considerations for assessing an appropriate sulfide odor treatment method for force main systems include: Retention time / duration of control Pump station type / cycling (e.g. vfd; start/stop, etc). Force main injection tap points, if any (e.g. air relief valves) Existence of intermediate re-lift stations or in series pump stations Manifold force main systems

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • KRYSTAL KLEEN CAR WASHES REMOVES WATER SOFTENERS AFTER SCALEWATCHER INSTALLATION

    Krystal Kleen Car Washes in Hoover, Alabama has removed the water softeners from its three self-service car washes following the installation of the computerized, electronic, water-conditioner Scalewatcher® from Scalewatcher North America. This has not only saved the company thousands of dollars a year in salt but also provided a short-term payback on the units. Krystal Kleen Car Washes is located in a hard water area, with Total Alkalinity of around 200mg/L. This necessitated Jim LeNoir, owner of Kyrstal Kleen Car Washes, using water softeners at his three premises to prevent scale formation and water spotting on the cars. “I decided to try Scalewatcher at Montevallo since this was the hardest water location of the three”, said Jim LeNoir. “I stored the water softener just in case it was needed. However, after a year the Scalewatcher was working just as efficiently as the water softener and the customers were happy. Next installation was at Calera with the same results and finally at Homewood which has a spot free rinse system.” All car washes, including conveyor or rollover; high-pressure touchless automatics and self-serve bays, use water as the primary means of removing the dirt, road grime, salt, and snow off the surface of the vehicle during the wash process. Water softeners are the mainstay in the wash industry, providing a means of removing the hard mineral deposits that prevent soap from working efficiently. Water softeners are utilized to overcome the calcium carbonate that is the primary component of water hardness. However, in many States now, including Southern California, municipalities and water departments are severely limiting, and in some cases prohibiting, the use of salt-regenerating water softeners due to concern regarding the increased levels of salt in ground water. The award-winning Scalewatcher system not only helps car washes meet these regulations by minimizing salt usage but also saves money on salt purchase and has the additional benefit of removing scale from lines and nozzles. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “All the water softeners have now been removed freeing up much needed space and saving me money. Best of all I no longer have to haul salt pellets”, concluded Jim LeNoir. Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 80 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Premium

    Advanced water purification technologies for power generation sector

    SnowPure has been providing EDI technology to the power plant market since 2002. Power plants around the globe are utilizing our Electropure EDI including locations in the United States, Central America, Europe, the Middle East, and China. With the introduction of our higher-capacity EXL product we are now able to serve a greater share of the power plant market including larger installations.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Premium

    Sea Water Intakes & Outfalls

    Desalinated sea water is a major water source for many countries. These facilities are often built with power generation plant and a major factor for all installations is reliability. This reliability starts with the sea water intake and regardless of the desalination technology (MSF, MED, RO) unplanned plant shut downs due to the ingress of hydrocarbons or a sudden jelly fish attack are absolutely unacceptable. The DESMI Oil Spill Response segment have many years experience in the design, manufacture, installation and commissioning of permanent oil boom and jelly fish net systems for a vast range of sea water intake systems. We have an impressive history of proven oil spill technology at various locations around the world including the harsh Middle East environment.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a role in the determination of odor annoyance are: odor concentration and intensity, frequency, appreciation, duration, synergy and location. CHROMATOTEC® proposes an automatic solution to well identify the origin and the level of odors.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Fast Water, Rivers & Lakes

    Oil spill response operations are notably difficult in rivers with strong current. In addition, when considering response times for river spills in relation to the mobilisation time required for conventional land- or vessel-based boom systems, a timely response is often a logistic impossibility especially in the more remote regions. Therefore, equipment must be readily at hand near the sites of operation and pre-rigged lines, cables and mooring areas are a must. Selection of a good location to deploy the oil containment system is dependent upon prior planning and understanding of the currents. Drift studies, river run off histories, tidal current tables and charts, plus computer modeling are all useful tools to understand the flow patterns and to develop recovery strategies. Reading the currents and flow patterns require practice and understanding of the hydrodynamics involved.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Waste Handling Equipment for the Maritime Industry

    Delitek AS is a market leading manufacturer and supplier of stainless steel waste handling equipment for the maritime industry. Our headquarters is located in Norway and our products are distributed via a global network of highly experienced agents and distributors.

    By Delitek AS based in Alsvaag, NORWAY.

  • Ground Penetrating Radars (GPR) for Pipes and Cables

    GPRs allow you to find a location, measure a depth of underground pipes, and cables, and other infrastructure items. The unique quality of GPR - they can find both metallic and non-metallic items with an equal efficiency.

    By Transient Technologies LLC based in Kyiv, UKRAINE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you