Only show results available in Virginia? Ok

water loss application Applications

  • Premium

    Water treatment solutions for cooling water treatment

    Efficiency is everything in the cooling water circuit. Everything at ProMinent revolves around the perfect cooling water circuit, which needs to experience few losses over its long life. The precise metering of inhibitors and biocides and suitable filters make this possible.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Chemical Water Treatment for cleaning

    Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or impurities.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water Treatment Solutions for Turbidity Removal

    Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change...

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Ultraviolet disinfection systems for the produced water treatment

    With environmental regulations becoming more stringent, and the link between re-injected water quality and operational costs becoming clear to operators, investing early in advanced water treatment solutions for produced water for both reinjection applications and environmental discharges is now a top priority for operators worldwide.  atg UV Technology have provided a number of specialist UV packages for the disinfection of Produced Water in order to reduce microorganisms such as SRB’s (Sulphate...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Assessing underground infrastructure for water industry

    America’s growth and development is dependent on reliable water provisions. Currently 3.9 trillion gallons of water are consumed in the United States per month, & the average American uses 176 gallons of water per day. Sources for drinking water are becoming less reliable as time passes. While nearly 70 percent of the world is covered by water, only 2.5 percent of it is fresh with the rest being saline and ocean-based. Water is a precious resource, therefore needs to be conserved and used...

    By EnTech Engineering Company based in Saint Louis, MISSOURI (USA).

  • Premium

    Ultraviolet disinfection systems for the well injection water & SRB reduction

    Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry.  Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes,...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Industrial solutions for cooling water contamination

    Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water changes.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water Monitoring and Flow Measurement Systems for Hydrology

    In recent years acoustic flow measurement and flow metering has established itself as the standard method for measurement in many hydrological stations but is also used as the basis for various applications, for example for flood protection and flood forecasting. Ultrasonic flow meters are also used in hydro-engineering constructions. With this almost contact free technology data can be recorded continuously and it provides 24/7 monitoring. Such flow monitoring is particularly important in waterways used...

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Industrial and commercial water filtration for reverse osmosis plants

    Reverse Osmosis or RO is a system used to produce an ultra-high quality of water with use of membrane. Reverse Osmosis plants are required in many production processes.  Damage to these high quality membranes can easily be caused if no pre-filtration is in place to protect the system from high loading, this can result in extremely high costs of repairs, ranging from tens of thousands to millions, not to mention the loss of production to a company if as a result of plant failure production has to be...

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Visual inspection solutions for the sewer and wastewater industries

    Inspection Cameras for Water, Wastewater and Stormwater Systems. Water and wastewater pipelines require ongoing maintenance and quick, professional emergency response to avoid costly repairs, major financial losses, frustration on the side of the clients and al lot of other problems. Whether it is a simple sewer clog in a residential building or a pipeline problem at a water treatment plant, they need to be dealt with immediately. Whoever provides the quickest and the most efficient solution will get the job...

    By Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Trapped Key Interlocks for Flow Control

    KIRK Eagle Series valve interlock systems can be implemented within many industries in which managing the flow of materials and products is critical.  Valve interlocks can aid in minimizing loss of product, preventing materials from mixing that may cause hazardous results,  and promoting flow control process safety that protects your personnel and equipment. The specific flow control applications below can be designed to meet the unique needs of every customer and can be added to an existing KIRK...

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Water quality monitoring for brewery industry

    Monitoring process streams and waste streams continuously in a brew house can provide many benefits to operations. Monitoring product in process for color or concentration provides consistency and quality measures. Product loss can be quantified by monitoring waste streams. Processes can be improved to increase efficiency and minimize effluent waste. Effluent waste streams can also be monitored for organic loading with BOD and COD correlations to ensure compliance for discharge.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Erosion & sediment control solutions for costal/beach region

    Coastal erosion is the wearing away of land or the removal of beach or dune sediments by wave action, tidal currents, wave currents, or drainage. Removing sand and other materials from beaches and dunes due to tidal storm surges and construction purposes causes massive beach erosion damages and land loss of seashores, thus destroying the natural heritage of the coast and reducing the vibrancy of the tourism industry. Uprooting vegetation from coastal areas destabilises beaches and clearing sites inland results...

    By Erosion Control Forum based in Bend, OREGON (USA).

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Data loggers and data acquisition monitoring solutions for the server room sector

    Large selection of high-accuracy data loggers suited for server room temperature monitoring. Monitor and record ambient temperature and RH%. LCD display, USB and WiFi communication options.Each server rack is vital to a data center’s operations, so server room temperature monitoring for this invaluable equipment isn’t optional; it’s necessary. Without environmental monitoring, businesses often suffer data loss or permanent damage to their server storage room equipment due to high temperatures,...

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Premium

    Erosion and dust control products for heavy haul road stabilizer

    Used on heavy haul roads, Envirotac prevents dust, wear, and erosion. Further, it helps saving water, preventing equipment damage due to dust, preventing loss of tire tread due to road wear and reducing emissions from equipment that would normally be used to maintain the road.

  • Erosion Control & Sediment Control

    Nilex’s engineered erosion control and sediment control products reduce the damaging effects of rainfall, wind and wave action on soil structures while replacing or reducing the dependency on scarce natural resources.

    Erosion Control 

    Geosynthetic erosion control products are designed to reduce damaging effects of rainfall, run-off, and wave and wind action on soil structures by redirecting water flow or acting as a barrier...

    By Nilex based in Edmonton, ALBERTA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you