Only show results available in Virginia? Ok

water management industry Applications

  • Premium

    Water control for water loss management industry

    By Singer Valve Inc. based in Surrey, BRITISH COLUMBIA (CANADA).

  • Thickening and dewatering of sludges for water and wastewater industry

    Both economic and ecological demands make maximum dewatering of sludge a most crucial step in the process flow, especially for the pulp and paper industry with their large quantities of sludge to handle. A highest possible dry content of dewatered sludge minimizes weight and volume, hence achieving the following objectives: reduction of transport and disposal cost. high heating value for incineration without additional fuel. With the sludge dewatering systems including both AKSE S disc thickener and AKUPRESS BX screw press BELLMER KUFFERATH Machinery offers plant and equipment able to dewater structured sludges to maximum dry contents.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Sludge monitoring for water and wastewater industry

    Improved monitoring and automation can deliver more efficient waste treatment and reduced energy consumption and improved effluent quality. The cost of treatment and the quality of effluent discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Wastewater solutions for the industrial effluent pollution management

    Problem: Industrial manufacturers face stringent regulations for discharging wastewater to the environment and municipal sewer systems. Biochemical Oxygen Demand (BOD) is a primary concern for many discharge limits, as wastewaters high in BOD can have adverse impacts on the aquatic environments by leading to oxygen depletion. In some cases, as a means to supplement BOD, it is also desirable to monitor chemical oxygen demand (COD) of industrial effluents. Both of these tests, are time and labour intensive reducing the frequency at which they can be measured for a given effluent.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • municipal and industrial waste water treatment

    glass fused steel tanks are used as various digesters and reactors in municipal and industrial waste water treatment plants. * superior performance in corrosion resistance and against rust *factory fabrication tank . No painting or spray on erection site . * minimal maintenance cost * No need crane or other large equipment during erection * not subjected to severe weather and environment. * can be designed to future expansion, dismantle or re-movement. * free service for technical drawings * turn key service from proposal to tank commissioning .

    By Shijiazhuang Zhengzhong Technology INC. based in Shijiazhuang City, CHINA.

  • Water treatment for muni and industrial

    With our network of Municipal manufacturer`s representatives, we provide integrated water treatment, pumping and water management solutions for municipal and industrial applications. We are systems integrators who offer the expertise and flexibility to provide treatment, pumping, controls, monitoring, service and support. We provide an unbiased evaluation of the best capital and operating cost solution for your municipal and industrial treatment, pumping and water management applications. Through our vast network of vendor/partners we have access to virtually every treatment option and provide the best solution to meet the application requirements and goals.

    By Lindsay Corporation based in Omaha, NEBRASKA (USA).

  • Premium

    Municipal wastewater solutions for thickening industry

    WesTech thickeners are an excellent choice prior to digestion. Although gravity thickening has long been successful, Dissolved Air Flotation (DAF) thickening has several process and sizing advantages, especially for BNR applications.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Produced water management for the oil and gas industry

    A combination of factors in recent years has led to increased attention to water management in the oil and gas industry. Some of these factors include: limited water resources in certain areas, development of water-intensive technologies to better exploit unconventional plays, excessive transportation/disposal costs for water, a changing regulatory environment and a public push for sustainability and conservation relating to water as a resource.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Premium

    Water treatment chemicals for the automotive industry

    Immense global competition has compelled the automobile industry to optimize processes and improve energy efficiency. Continuous and effective production processes are key factors to meeting these challenges. Kurita is your competent partner for all questions concerning water and waste water management as well as paint detackifying. With more than 60 years of experience, we offer the most technically up-to-date water and process treatment solutions. Our highly qualified engineers will gladly advise you on how to increase plant lifecycle and reduce energy costs.

    By Kurita based in Ludwigshafen, GERMANY.

  • KRYSTAL KLEEN CAR WASHES REMOVES WATER SOFTENERS AFTER SCALEWATCHER INSTALLATION

    Krystal Kleen Car Washes in Hoover, Alabama has removed the water softeners from its three self-service car washes following the installation of the computerized, electronic, water-conditioner Scalewatcher® from Scalewatcher North America. This has not only saved the company thousands of dollars a year in salt but also provided a short-term payback on the units. Krystal Kleen Car Washes is located in a hard water area, with Total Alkalinity of around 200mg/L. This necessitated Jim LeNoir, owner of Kyrstal Kleen Car Washes, using water softeners at his three premises to prevent scale formation and water spotting on the cars. “I decided to try Scalewatcher at Montevallo since this was the hardest water location of the three”, said Jim LeNoir. “I stored the water softener just in case it was needed. However, after a year the Scalewatcher was working just as efficiently as the water softener and the customers were happy. Next installation was at Calera with the same results and finally at Homewood which has a spot free rinse system.” All car washes, including conveyor or rollover; high-pressure touchless automatics and self-serve bays, use water as the primary means of removing the dirt, road grime, salt, and snow off the surface of the vehicle during the wash process. Water softeners are the mainstay in the wash industry, providing a means of removing the hard mineral deposits that prevent soap from working efficiently. Water softeners are utilized to overcome the calcium carbonate that is the primary component of water hardness. However, in many States now, including Southern California, municipalities and water departments are severely limiting, and in some cases prohibiting, the use of salt-regenerating water softeners due to concern regarding the increased levels of salt in ground water. The award-winning Scalewatcher system not only helps car washes meet these regulations by minimizing salt usage but also saves money on salt purchase and has the additional benefit of removing scale from lines and nozzles. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “All the water softeners have now been removed freeing up much needed space and saving me money. Best of all I no longer have to haul salt pellets”, concluded Jim LeNoir. Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 80 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Premium

    Water Analyzing for the Mining Industry

    As a primary industry, the mining industry faces the needs for optimizing the management of its resources. Exploration and excavation activities should be as efficient as possible. Companies also aim to maintain water resources while at the same time controlling the environmental impact of their activities. As pioneers in exotic mining analytics, AppliTek can help you with a selection of application-oriented analyzers, from portable XRF systems to on-line analyzers for water and process applications.

    By AppliTek NV based in Nazareth, BELGIUM.

  • GIS software for water resource industry

    GIS is a powerful tool for developing solutions for water resources such as assessing water quality and managing water resources on a local or regional scale. Hydrologists use GIS technology to integrate various data and applications into one, manageable system. The suite of tools contained in Arc Hydro facilitate the creation, manipulation, and display of hydro features and objects within the ArcGIS environment.

    By Esri based in Redlands, CALIFORNIA (USA).

  • Premium

    EH&S Regulatory Compliance Management for Utilities Industry

    Utilities are under tremendous pressure, receiving intense regulatory, legislative and public scrutiny to modernize their infrastructure, update transmission lines and equipment, and reform energy regulations. Beyond regulatory compliance, the utility industry is known for its focus on safety. With many utility companies under significant pressure from forced downsizing due to cost pressure, mergers and acquisitions, and de-regulation, it is becoming more difficult for overburdened EH&S staff, faced with fewer resources and an increase in regulatory requirements, to adequately focus on all of the EH&S functions.

    By 3E Company based in Carlsbad, CALIFORNIA (USA).

  • QUA - Industrial Water Filtration

    QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your plant’s design economics & reliability reduce fouling simplify cleaning lower the total installed cost reduce the footprint of overall wastewater treatment. Committed to ongoing innovation, QUA manages the entire lifecycle & manufacturing chain of its products from the initial concept to manufacturing according to the most rigorous quality standards. QUA products are manufactured in a state-of-the-art membrane manufacturing facility with continuous online monitoring to main

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Environmental Control for the Water Utility Industry

    This section contains applications relevant for compliance, water treatment, drinking water and natural sources.

    Collecting, treating and distributing water to consumers and industry, in compliance with quality standards, means a challenging task to water companies. Both private as public water treatment entities have to manage carefully and sustainably their sources, processes and even distribution networks. AppliTek supports them not only with an extended portfolio of analyzers but also with its experience in the advice, design and construction of complete monitoring systems and stations.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Microbial testing for water treatment industry

    Why wait until tomorrow to know today`s water quality? How clean is your water? Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water distribution systems and aids with disinfection and flush cycles. LuminUltra`s QGA test is the ideal tool to help save time & money and reduce risk in water treatment and distribution!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you