Only show results available in Virginia? Ok

water measurement solution Applications

  • Premium

    Flow measurement instrumentation for waste water treatment flow solutions

    With its high turndown and direct mass flow, our immersible thermal meters are the instrument of choice for measuring aeration basin air flow and monitoring digester gas. Our vortex meters are used to measure steam in the cogeneration processes, while our ultrasonic flowmeters are used for influent and effluent measurement.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Measurement solution for high NH3 monitoring from wastewater

    Protea was asked to supply a high level ammonia (NH3) measurement system for a waste water treatment plant. The reflux drums at the inlet to two ammonia stripping towers needed to be measured continuously. Protea designed a solution based around our Solus TDLAS analyser platform and a high level dilution system. The Solus analyser was configured for NH3 measurements in the range 0-500ppm. A dilution system incorporating special dilution probe and 19` control panel was installed before the analyser. This gave a dilution level of 600:1, enabling the NH3 analyser to measure in the range 0-30% Volume.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Power-independent flow measurement with GPRS

    In a pit water purification system it was necessary to detect the discharge volumes. The operator wanted a regular and automatic transmission of readings. On the selected measurement place no mains power connection was available. Due to the risk of vandalism, it was not planned to install a switching cabinet. See the NIVUS solution for this measurement task here.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Water Treatment Solutions for Turbidity Removal

    Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change causing a turnover of those levels, bringing sediment, plants, and algae to the top.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Microbial Solutions for Wastewater Treatment

    Whether industrial or municipal, Microbial Discovery Groups proprietary platforms address the variety of challenges associated with wastewater treatment. Too many failures in the bioaugmentation industry stem from focusing on the product, rather than understanding and complementing wastewater systems and operations. MDG will work with you to provide customized system surveys, sampling and testing results, return on investment proposals, and regular monitoring programs specific to your end user customer. We will show you how to measure success and provide sustainable turnkey solutions for your client.

    By Microbial Discovery Group (MDG) based in Franklin, WISCONSIN (USA).

  • Waste water respirometry solutions for toxicity reduction tests

    In industrial manufacturing companies, before a new process comes on-line, it is important to measure the toxicity of the effluent stream. This is especially the case for companies who treat their own waste. From the toxicity value (EC50) obtained, it may be a cost-effective solution to simply discharge the effluent to the treatment works at a slow and defined rate to minimise damage to the activated sludge. Following a period of acclimatisation it is often possible to increase feed rates to the plant and this can again be managed using the Strathtox Respirometer. An alternative approach is to undertake toxicity reduction procedures, such as neutralisation or acid hydrolysis, in pilot-scale laboratory studies. The Respiration or the Nitrification Inhibition Test may be used for this. In the future, toxicity reduction may be stipulated by local authority, water company or publicly-owned treatment works prior to giving discharge consents. Toxicity reduction may be evaluated using toxicity tests on activated sludge provided by the treatment works.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Premium

    Precipitation measurement with GPRS data transmission

    In a water association consisting of several communities it became necessary to investigate the precipitation volumes for billing purposes. Seven measurement spots were required to detect the precipitation volumes. Since data from the four existing measurement spots had to be collected manually so far, the new measurement concept was planned to feature data transmission to a central access point via GPRS. See the NIVUS solution for this measurement task here.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Water measurement systems & sensors for status & condition-based monitoring

    We offer a variety of telemetry based solutions to monitor and control assets:

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Premium

    Wastewater solutions for the industrial effluent pollution management

    Problem: Industrial manufacturers face stringent regulations for discharging wastewater to the environment and municipal sewer systems. Biochemical Oxygen Demand (BOD) is a primary concern for many discharge limits, as wastewaters high in BOD can have adverse impacts on the aquatic environments by leading to oxygen depletion. In some cases, as a means to supplement BOD, it is also desirable to monitor chemical oxygen demand (COD) of industrial effluents. Both of these tests, are time and labour intensive reducing the frequency at which they can be measured for a given effluent.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Wastewater solutions for municipal sewer control

    Problem: A significant portion of the operational costs of a conventional municipal wastewater treatment plant employing an aerobic biological treatment unit comes from electricity costs associated with aeration. In many cases, the aeration rates are kept at the maximum level to ensure that the plant’s effluent is in compliance with the regulations. The critical parameter for regulatory purposes and treatment efficiency, BOD, takes 5 days to measure through standard methods providing almost no value to the plant operators in terms of adjusting aeration rates and chemical dosing.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Solutions for irrigation flow monitoring in submerged culverts

    Greyline DFM 5.0 Doppler Flow Meters with waterproof ultrasonic sensors measure flow in submerged concrete culverts in the Raymond Irrigation District in Alberta, Canada.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Water Data Management Solution for Alpine Monitoring

    KISTERS has developed a specific version of WISKI with unique benefits for those monitoring Alpine Regions. Some of its advanced features include specialized calculations for measuring precipitation, snow, sediment transport and water balances in catchments.

    By KISTERS AG based in Aachen, GERMANY.

  • Analysis of aqueous solutions

    IR-Spectroscopy is not limited to gases, solid materials and pure liquids but also facilitates the measurement of solutes in aqueous media. Though, due to the strong and temperature dependent absorption of water, the usage of conventional IR-transmission and ATR accessories is not very suitable for the analysis in water. The CONFOCHECK is a dedicated FT-IR system for the fast, easy and sensitive analysis of aqueous samples. Using this system, preparing, measuring and evaluating any aqueous sample takes typically about 1 minute.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Water Data Management Solution for Meteorology Sector

    The management of hydro-meteorological data demands the highest process standards. Both recorded and derived data from various observation areas are archived together, edited in graphical and tabular form, analyzed, evaluated and presented. In order that these tasks are carried out efficiently and economically, the support of a specialized software solution is required. Our water data management solutions offer a comprehensive spectrum of functions for integrated collection, processing, quality control, evaluation and publication of data from extensive hydro-meteorological measuring networks.

    By KISTERS AG based in Aachen, GERMANY.

  • Water measurement systems & sensors for flood warning

    Isodaq’s low-cost Isodaq telemetry data logger RTUs integrated with our telemetry data acquisition and alarm-message forwarding systems together provide the ideal solution for early warning of key events such as floods, pollution or CSO overflows.

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Water Data Management Solution for Groundwater Monitoring

    Deployed across all relevant sectors including landfill security, well field monitoring programs, pumping tests, and drinking water supply, KISTERS solutions can be used to measure groundwater data.

    By KISTERS AG based in Aachen, GERMANY.

  • Premium

    Flow meters for the environmental flow solutions

    Our flow measurement technology is ideal for applications ranging from landfill emissions to wastewater treatment and numerous applications in between. We have developed many flow meters and controllers to measure the emissions from landfills and other green house gas producers, in addition to being a long standing leader in the testing of emissions for large engines. Water treatment is also an important driver for the company as we continue to develop innovative solutions for waste water treatment.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Facilities management in line air flow meter solutions

    Sierra’s offers a complete line of precision flow solutions for any gas, liquid or steam measurement to improve energy efficiency in all facilities management applications. Our mass vortex meters are used to allocate steam, our in line thermal mass flow meters track and allocate natural gas and compressed air usage, and our clamp-on and insertion ultrasonic meters provide accurate water and water-based fluid measurement.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Environmental Water Analysis

    Now for the first time you can measure ion levels in drinking / tap water, rivers and lakes using one probe and one set of calibration solutions. We have probes specially tailored for environmental testing. Our Environmental probes measure Chloride, Ammonium and Nitrogen or we have a total nitrogen probe measuring Ammonium and Nitrogen. Each probe can be calibrated in our unique calibration solutions allowing you to calibrate all sensors simultaneously and take measurements in drinking or river water. Probes are also available in our standard four or six ion combinations and can be custom packaged upon request.

    By CleanGrow based in Blackpool, IRELAND.

  • Premium

    Process Analytics - Wastewater Applications

    Control of wastewater is increasingly becoming important to avoid potential environmental and increasing legal consequences. Accurate pH, O2, conductivity and turbidity measurements are critical in modern wastewater treatment. METTLER TOLEDO offers reliable, cost-effective solutions to control industrial effluents.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you