Only show results available in Virginia? Ok

water measuring instrument Applications

  • Premium

    Analytical and measuring instruments of environmental industry

    The environmental field requires robust, high-sensitivity analysis capable of complying with regulations in order to always meet the stringent target values that have been established to assure the safety of the water supply and protect the environment. Moreover, in laboratories where more than 100 samples are processed per day, increasing the throughput and saving energy are issues of concern.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Premium

    Instruments and analyzers for spectral DNI measurements

    Where the pyrheliometer is most suitable to quantify the total DNI of the solar spectrum. The spectroradiometer gives details about the energy distribution which is important for PV or CPV cell research. The solar spectrum wil change with the angle of incidence and its path through the atmosphere. Photons wil be reflected, scattered or absorbed. Big absorbers of infrared irradiance are water vapor, carbon dioxide, and ozon.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Flow measurement instrumentation for waste water treatment flow solutions

    With its high turndown and direct mass flow, our immersible thermal meters are the instrument of choice for measuring aeration basin air flow and monitoring digester gas. Our multivariable vortex meters are used to measure steam in the cogeneration processes, while our ultrasonic flowmetersare used for influent and effluent measurement.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. The fixed installation products for these purposes are the Gasmet™ CEM II measurement system, and the Gasmet™ FCX Gas Analyzers, both of which utilize the FTIR measurement technique for simultaneous multicomponent analysis of the sample gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Instruments and analyzers for DNI measurements with a pyrheliometer

    Solar Direct Normal Irradiance (DNI) represents the direct solar component and contains about 80% of the total solar energy budget on earth. Outside the atmosphere (AM0) the solar irradiance is considdered as a constant (1367 W/m2) that slightly fluctuates with a 11 year cycle. The DNI at the earth surface is highly variable due to the atmospheric conditions (clouds, aerosols, water vapor and molecules).

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Flow Measurement instrumentation for digital air / gas, steam, water flow meters

    For over 40 years Sierra has advanced our flow technology to offer customers around the globe the most cutting-edge thermal technology on the market. From heavy industrial to research and analytical applications, Sierra has a wide range of digital air flow meters and controllers with digital output protocols for easy network integration. Sierra offers digital gas flow meters and mass flow meters across two core technologies: Capillary Thermal, and Immersible Thermal. Buy a large selection our air flow meter solutions online, ships the next day!

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Water monitoring instruments for surface water monitoring

    Surface water monitoring as an application covers many different environments and can require different equipment depending on the monitoring requirements. Possible environments include lakes, rivers and coastal waters where the monitoring may be focused on water quality or water level measurement. Aquaread offer instruments suitable for each of these environments and have a wide range of possibilities depending on the kind of data you wish to collect.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Premium

    Industrial process measurement & automation solution for water & wastewater

    Increase your efficiency and ensure compliance with an experienced and trusted partner. Legal demands, shrinking budgets and increasing process complexity: the challenges faced by the water & wastewater industry have never been greater. To master these challenges you need a partner who combines extensive industry knowledge and experience with an entire portfolio of measuring instruments, solutions and services.

    By Endress Hauser AG based in Reinach, SWITZERLAND.

  • Premium

    Instruments and analyzers for spectral irradiance portable solutions

    Reflection and transmission measurements on materials, vegetation, water or atmosphere give valuable information about biological, physical and chemical processes. Processes driven by solar radiation, in particular bands of the spectrum through the so called action spectra, can be analysed or quantified with a sensor senitive in the particular spectral band. The MS-720 portable spectroradiometer gives total freedom to be used in different applications and range of the spectrum between 350 - 1050 nm.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Differential level transmitter for VFD pump control & flow measurement

    An Ontario municipality deploys Portable flowmeters to solve flow rate discrepancies between sewage pump station effluent and lagoon influent flowmeters. Faced with suspension of construction permits due to flow rate uncertainty, the Township of North Glengarry called on Greyline Instruments to help troubleshoot two permanently installed flow meters.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Process instrumentation and analytics solutions for environmental monitoring industry

    From monitoring impurities in vents, stacks, air or water to point source or area monitoring, automatic and on-line measurement is an important tool. This type of measurement will detect, quantify and assist in reducing emissions. Siemens analytical products are utilized for many of these measurements.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Premium

    Waste Water

    Waste water, especially industrial waste water, is the most challenging water for instrumentation. Mostly, this water is characterized by highly fluctuating loads, very high salt concentrations as well as a high particle density. Hence, the accurancy and speed of measurements depends on the measurement system itself and the oxidation technique used. Obviously, application-specific analyzers provide huge advantages against standard analyzers that are used for all applications.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Premium

    Process water

    Process water is one of the most challenging for analysis instrumentation. Mostly this water is characterized by a certain purity, fluctuating loads, as well as very high salt concentrations. Since any disturbance in water-circuits can lead to an entire plant shutdown, resulting in huge costs, reliable and fast online water analyzers are an essential. Due to the diverse demands of various measurement challenges, application-specific analyzers provide huge advantages against standard analyzers that are used for every application.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Premium

    Gas monitoring instruments and systems for greenhouse gas emissions from soil

    Measurement of greenhouse gases released from soil and water surface forms an important part of climate change study. Microbial activity in the soil or for instance the melting of permafrost releases greenhouse gases such as Methane and nitrous oxide N2O into the atmosphere. Measurement of the concentration for these gases inside an open-bottom soil chamber placed on the soil over time tells the emission rate (flux) per chamber footprint area.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Water monitoring technology for coastal & estuary

    Measurement of water quality in coastal regions and estuaries is critical in the characterization of hypoxic ‘dead zones’ as a result of nutrient loading and algal blooms in the water bodies. Sediment loading analysis through turbidity measurement is also important for coastal trend identification and modeling. Hydrolab and Sea-bird Coastal offer a variety of multiparameter water quality instrumentation and nutrient sensors for long-term coastal applications.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Monitoring Once Through Cooling Water

    Fluorescence-based oil in water monitors from Turner Designs Hydrocarbon Instruments have been used extensively in industrial water processes for more than 20 years. These low maintenance fluorescence monitors have no significant measurement disturbance from water turbidity or naturally occurring organics in the water. Oil in water monitors can help detect and prevent major oil spills that may cause significant environmental damage and regulatory compliance infractions.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    DETERMINATION OF TOTAL PETROLEUM HYDROCARBONS (TPH) IN WATER BY FLUORIMETRIC METHOD

    Total petroleum hydrocarbons (TPH) is a term used to describe a large family of several hundred chemical compounds that originally come from crude oil; the main and most specific part of these compounds are non-polar and slightly polar hydrocarbons of the aliphatic, aromatic and alicyclic structure. These compounds are harmful to humans and animals if absorbed through the skin, ingested, and inhaled thus claiming the analytical control of THP content in water as a global issue. Quantification of TPH in water is typically done using rather expensive chromatography techniques. Lumex Instruments developed fluorimetric method for cost-effective petroleum hydrocarbons in water determination using FLUORAT-02 analyzer. The method is based on measuring the fluorescence intensity of oil products after their extraction from water phase by hexane.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Water intake protection monitoring for wastewater treatment industry

    Intake protection systems have been extensively installed to protect water treatment works, from ingress of polluted water and waste-water plants from toxic chemical loads. A suitable system typically comprises a suit of instrumentation, measuring key chemical, physical and indicator parameters dependant upon the identified risks, associated with the individual site activity or discharges from neighbouring industry.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you