Only show results available in Virginia? Ok

water meter monitoring Applications

  • Electronic Bulk/ Domestic Water Meter

    ■■ EMS, Taiwan ■■ Intelligence Electronic Water Meter: - Class C Electronic Water Meter - Woltmann Electronic Water Meter - Multi-Jet Water Meter - Vortex Flow Meter - Magnetic Flow Meter - Ultrasonic Flow Meter - Gear Free - Magnet - Free - DMA (District Meter Areas) management - NRW (Non-revenue water) - AMR (Automatic Meter Reading) - MNF Log (Minimum night flow) - Monthly Water Consumption Log -Tamper-Proof Device - Water Leaking Detector - Bi-Directional Flow Indicator - ISO 4064:2005 / ISO 4064: 1993 - All Kinds of Transfer Interface (wired/ wireless) - Smart houses, smart building

    By Energy Management System Co., Ltd. based in Tainan City, TAIWAN.

  • Premium

    Water Monitoring and Flow Measurement Systems for Water Supply

    Although there is enough water on earth, its uneven distribution, the rising population and our carelessness drinking water starts to get short. In the future more and more pipelines for drinking water will be built all over the globe. In order to operate huge and complex pipe networks efficiently, water flow measurement and flow monitoring will become necessary. The increasing efficiency of ultrasonic flow meters will make such calculations more and more effective.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Water Monitoring and Flow Measurement Systems for Hydrology

    In recent years acoustic flow measurement and flow metering has established itself as the standard method for measurement in many hydrological stations but is also used as the basis for various applications, for example for flood protection and flood forecasting. Ultrasonic flow meters are also used in hydro-engineering constructions. With this almost contact free technology data can be recorded continuously and it provides 24/7 monitoring. Such flow monitoring is particularly important in waterways used for shipping, transportation, irrigation, drainage and for cooling water extraction of power plants. A further important use of transit-time open channel flow meters is the transportation of water used for the supply of drinking water. Here the focus lies on detecting the flow rate of water loss at an early stage as it is sometimes difficult to detect small leakages.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Flow monitoring for quarry dewatering compliance

    A Greyline AVFM Area-Velocity Flow Meter monitors and data logs water discharged from the Bray Quarry to the South Raisin River. The Quarry is required to measure flow for environmental permit compliance.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Area-velocity flowmeter for sewage lagoon discharge flow monitoring

    The Township of South Glengarry installs a new Greyline AVFM 5.0 Area-Velocity Flow Meter to measure continuous discharge from their municipal sewage lagoon. The sealed ultrasonic sensor is mounted in a horizontal 12` PVC pipe. The AVFM replaced a magnetic flowmeter that was unable to measure seasonal low flow rates.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Water Monitoring and Flow Measurement Systems for Water Power

    Hydro power contributes to supplying approximately 3,5 per cent of electric energy generated worldwide. Its share in power generation from renewable resources lies at 18 per cent and will continue to grow as resources of fossil fuels are depleted. Hydro electric performance depends essentially on the usable altitude difference between upper and lower reservoir, and hence the resulting water flow. In order to use the “fuel” water in an optimal way, the flow velocity has to be monitored without any interruptions. Ultrasonic flow meters, flow sensors and clamp-on flow meters (OR clamp-on technology) are ideal for accurate flow metering and flow monitoring.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Solutions for irrigation flow monitoring in submerged culverts

    Greyline DFM 5.0 Doppler Flow Meters with waterproof ultrasonic sensors measure flow in submerged concrete culverts in the Raymond Irrigation District in Alberta, Canada.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Sewage Treatment Plants and Flow Sensors for Industry Application

    In sewage treatment plants, flow sensors are primarily installed for internal reasons. Ultrasonic flow meters are used to control the flow velocity in partially filled and fulfilled pressurized pipes, specific plant components, for leak detection or to control the use of additives. International regulations such as the EU-Directive for handling municipal waste water require flow metering for a continuous surveillance of waste water flow. Defective flow monitoring in sewage-treatment plants can therefore influence their operation, but there can also be legal or environmental consequences.

     

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Wet gas monitoring for refineries

    Thermal mass flow meters provide excellent measurement capabilities in dry gas flows. They have proven durability, accuracy, and repeatability. However, thermal flow meters are sensitive to liquid droplets in a wet gas stream. For a thermal flow meter to work accurately in a condensing gas environment, the probe must be placed far enough downstream so that the entrained water has condensed onto the pipe wall. In a very wet environment, any condensing liquid (commonly referred to as mist or fog) contacting the sensor probes causes a high reading due to the liquid vaporizing on the heated portion of the sensor. As a result of this deficiency, measurements with conventional thermal meters are largely ignored when moisture levels rise because there is no confidence that the measurements are true.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Disposal and Cleaning Equipment for Waste Water Industy

    Drinking water is not the only area requiring flow monitoring. The disposal and cleaning of waste water also requires flow meters. Waste water used to be dumped directly into the soil or an open channel. As awareness has increased, most discharges are now treated to assure long term sustainability. Modern water treatment plants are highly complex systems that require the use of flow sensors to monitor flow velocity in open channels for waste water discharge. Likewise facilities for waste water collection and clarification plants need regular data on flow rate. The use of radar non contact flow measurement and ultrasonic doppler flow meters are particularly efficient. HydroVision can complete flow measurements in all of these areas.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Precision liquid flow sensor measurement technology

    Accurate liquid flow sensor measurement can reduce water bills, determine leakage rates, and increase system efficiency. Solve accurate water and industrial liquid flow measurement requirements with clamp-on or insertion ultrasonic flow liquid flow meters featuring precision sensing elements or our complete line of multivariable mass vortex meters.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Flow & Energy Management Solutions for plant & machine

    Spire Metering offers several solutions for leakage detection. The flowmeters are used to monitor cooling water in machining process. They are used also in liquid process control and leakage detection applications.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Flow measurement instrumentation for waste water treatment flow solutions

    With its high turndown and direct mass flow, our immersible thermal meters are the instrument of choice for measuring aeration basin air flow and monitoring digester gas. Our vortex meters are used to measure steam in the cogeneration processes, while our ultrasonic flowmeters are used for influent and effluent measurement.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Smoke generator device for large scale external exercises and tunnel testing

    Making smoke in a very open environment or external environment can be a challenging! An oil-based smoke generator, such as a ViCount system, can produce dramatically more artificial smoke than multiple water based systems. This is due to the fact that the smoke ViCounts produce, being oil-based, does not evaporate in the same way and speed that water-based smoke does. The smoke from a ViCount smoke generator will travel for 1000`s of meters, compared to a typical water based smoke machine that may produce a smoke visible for 100 meters. Just one ViCount or Vulcan can replace 10 or more conventional water based smoke systems. ViCount`s have been used world wide for many tunnel smoke simulations, be it for RTA training / evacuation exercises or tunnel ventilation testing.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Premium

    Irrigation water flow measurement for open channels and partially filled pipes

    Greyline AVFM Area-Velocity Flow Meters monitor and totalize irrigation water distributed through a network of canals, channels and pipelines in the United Irrigation District.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Area-velocity flowmeter for measuring sewage and stormwater flow

    Greyline AVFM Area-Velocity Flow Meters are installed thoughout the country by Teletronic Denmark to monitor municipal sewage and stormwater. Application photos and descriptions illustrate flow monitoring in manholes and open channels.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you