Only show results in Virginia? Ok

water mixing Applications

  • Regenerative blowers

    Regenerative blowers for waste water aeration. Rotary lobe blowers for waste water aeration.

    By Air Power Products Limited based in Cambridge, ONTARIO (CANADA).

  • Industrial mixing for the water treatment industry

    The Veenstra Group is a true specialist in manufacturing mixers for the water handling industries.

    By Veenstra Group based in Coevorden, NETHERLANDS.

  • Premium

    Agitation and mixing solutions for water and wastewater treatment.

    Municipal water treatment facilities utilize continuous mixing to process drinking water for municipalities.  There are a variety of drinking water sources and therefore different processing steps for the water.  Processes utilize rotating and static mixing to treat the water for human consumption.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Electrical Based Tomography Systems for Batch mixing

    Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing). Alternatively, an array of up to 8 circular planes, each with 16 electrodes can be used to provide a more complete picture of the mixing process.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Acid Eddy Chemical Dilution Trough

    By Global Treat, Inc based in Spring, TEXAS (USA).

  • Air control for wastewater treatment aeration

    Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity`s sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result, large compressors are used to force air through hundreds of air diffusion filters at the bottom of the aeration basins, providing a constant 24/7 supply of oxygen to the micro-organisms in the water.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Water quality monitoring systems for wastewater & effluents monitoring industry

    Instruments for monitoring the aeration-process, nitrification and de-nitrification; chlorination and de-chlorination; as well as the final discharge into the environment.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Premium

    Agitation and mixing solutions for mineral processing

    Mineral Processing includes recovery operations at a mine site and the associated processing plant.  The processing operations involve the extraction of metal ores and minerals from the mined rock.  Mines use mixers in Backfill or Water Treatment operation. Major applications involving mixers and agitators are found in the processing plant.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Pulsair`s industrial mixers for liquid mixing - water & wastewater industry

    Pulsair Systems offers the most effective and low energy cost solution for liquid mixing. Our proven mixing process is up to 70-90% more energy efficient than traditional mixing methods and addresses all the major challenges associated with mixing most any type of liquid regardless of its viscosity.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Automated solutions for the aeration lagoon / pond dredging

    LWT`s dredging systems are used for aeration lagoon / pond dredging applications. A dredging system for removal and disposal of raw sewage solids, decayed algae and microorganisms, and algae-laden sludge results in a long term solution for treatment plants. Aeration lagoon / pond dredging increases lagoon storage volume, provides improved detention time, and accommodates increased plant flow.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Water Disinfection for Industrial Water Treatment

    MIOX’s patented Mixed Oxidant Solution (MOS) or Hypochlorite (HYPO)chemistries for cooling tower and cooling loop water disinfection improves safety, lowers general corrosion rates, increases performance, and saves money. The unique qualities of MOS lowers corrosion rates by 80% in copper and 50% in steel, resulting in a reduction of downtime, maintenance, and expense. Additionally, MIOX generators improve workplace safety by eliminating the handling and storage of hazardous chemicals while maintaining steady disinfection residuals.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Waste water respirometry solutions for toxicity tracking

    If toxicity is identified in a mixed sewage entering a treatment works, the problem for the plant manager is to track and identify the source of the toxicity. This can be done by sampling the effluent stream at various points in its length. By working in a logical sequence back up the sewer network the number of samples can be minimised. This type of testing should be rigorously enforced for new product introduction by a waste producer, as well as sampling the effluents directly at source. The samples would be tested against the activated sludge of the receiving works, using the Respiration Inhibition Test or the Nitrification Inhibition Test.

    By Strathkelvin Instruments Ltd. based in Motherwell, UNITED KINGDOM.

  • Solutions for the aerobic bioremediation

    BioSolve Pinkwater is used to accelerate natural bioremediation of contaminated soil either on site through surface application or on land farms through application to biopiles. When Pinkwater solution is sprayed onto and aggressively mixed into contaminated soil, hydrocarbons come in contact with the strongly “lipophilic” (oil loving) surfactant. Mimicking the process by which bacteria make hydrocarbons digestible, the surfactants “solubilize” contaminates, pulling them into an aqueous phase. This greatly enhances “bioavailability” for naturally occurring hydrocarbon degrader bacteria. Bacteria are able to more rapidly consume the contaminating oil/fuel, thereby dramatically accelerating the biodegradation process.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Wastewater treatment systems for reservoirs and impoundments

    For reservoirs and impoundments, GURNEY ENVIRONMENTAL offers highly efficient methods to mix, destratify and reaerate large areas.

    By Gurney Environmental Ltd. based in Kings Lynn, UNITED KINGDOM.

  • Trapped Key Interlocks for Flow Control

    KIRK Eagle Series valve interlock systems can be implemented within many industries in which managing the flow of materials and products is critical.  Valve interlocks can aid in minimizing loss of product, preventing materials from mixing that may cause hazardous results,  and promoting flow control process safety that protects your personnel and equipment. The specific flow control applications below can be designed to meet the unique needs of every customer and can be added to an existing KIRK trapped key interlock system.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you