Only show results available in Virginia? Ok

water monitoring tool Applications

  • Laser detection solutions for water-quality monitoring

    The technology of Spectral Fluorescence Signatures (SFS) is a very sensitive and selective tool to monitor many industrial processes on site and in real-time. The SFS analyzer series – SFS-Scanner and Instant Screener spectrofluorometers - are capable of detecting target substances even in complex mixtures without any pre-treatment of the samples.

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • Water Data Management Solution for Hydrometric Network Monitoring

    Centralize your hydrometric network monitoring efforts with KISTERS solutions. They provide a complete range of tools to monitor surface water, groundwater, meteorological, and water quality data.

    By KISTERS AG based in Aachen, GERMANY.

  • Dust monitoring and Sand Storm Monitoring

    The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and activities. They reduce visibility, layer on skin and cloths, infiltrate buildings and find their way into food and drinking water leaving a permanent sandy feeling in your mouth. Traditional dust monitoring instruments whether they be purely filter based gravimetric samplers or continuous monitors utilising Tapered Element Oscillating Microbalance (TEOM) or Beta Attenuation (BAM) simply are unable to cope with the high dust loads created by these storms. The filters on these instruments are quickly clogged and no further measurements are possible until a service technician visits to replace filters and filter tapes. In dust storm events this is impossible. Therefore, over the past few years a need for alternate technology which are non filter based, can cope with extremely high dust loads, require minimal maintenance and can operate off solar power has been employed in regions such as the Gobi Desert of China for the continuous monitoring of dust storm events. These instruments have demonstrated that an instrument can measure dust storm events with maintenance performed only once every 12 months. That it is possible to communicate remotely and that these systems can not only provide an early warning for dust events but have the accuracy and sensitivity to be an extremely useful tool in gauging hourly changes of visibility. Infact such instruments have been utilised by a number of EPAs around the world, including all Australian EPAs for the purpose of measuring ambient visibility as well as providing an accurate indication of rising dust events.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Online Monitoring for the Demi-Water Production Industry

    Demineralization is the process of removing mineral salts as well as organic impurities from water by means of ion-exchange and can be found in various industries such as the chemical, food & beverage, irrigation and filtration industries. The consuming side of the industry relies on ever increasing quality and availability of demi-water while the manufacturers have to balance cost/output. AppliTek provides high quality analytical tools to increase process efficiency and quality control. Continuous measurements with high accuracy are carried out on the critical QC/QA parameters of the deionizing process:

    • Silica
    • Low sodium
    • Total Organic Carbon

    By AppliTek NV based in Nazareth, BELGIUM.

  • Laser detection solutions for environmental monitoring

    LDI laser remote sensing technology provides users with the tools to conduct broad and accurate environmental surveys of both water and ground in stressed environmental zones, which makes our products especially suitable for oil spill response operations. The technology is based on the Laser Induced Fluorescence (LIF) and realized by the Fluorescent Lidar Systems – FLS (LiDAR – Light Detection And Ranging).

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • Monitoring Sewage Flow

    Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Premium

    Process instrumentation and analytics solutions for environmental monitoring industry

    From monitoring impurities in vents, stacks, air or water to point source or area monitoring, automatic and on-line measurement is an important tool. This type of measurement will detect, quantify and assist in reducing emissions. Siemens analytical products are utilized for many of these measurements.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Early warning systems for waste water industry

    Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental impacts.

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Electrical Based Tomography Systems for Batch mixing

    Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing). Alternatively, an array of up to 8 circular planes, each with 16 electrodes can be used to provide a more complete picture of the mixing process.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Indoor air quality measurement

    CairTub allows the easy deployment of autonomous measurement points virtually anywhere. The system can be used in harsh weather conditions. It is also the ideal tool for low cost studies for the optimisation and setting-up of fixed air quality monitoring stations. Cairpol systems can be used for fugitive emissions and odour measurement on industrial sites like waste water treatment plants (WWTP), landfill, compost plant, along a street or motorway, or in any sensitive area. Cairpol monitoring systems also offer the possibility to measure continuously pollutant levels in workshop atmospheres, houses and public buildings.

    By Cairpol Environnement S.A based in POISSY Cedex, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you