Only show results available in Virginia? Ok

water piping system Applications

  • Sewer Piping Systems

    Whether the project calls for a sanitary or industrial sewer relining, sewer cleanout or installing new sewers, ISCO has the solution. Pipe offered by ISCO Industries for sewer applications includes HDPE pipe, PVC pipe, ductile iron pipe and profile pipe. ISCO Industries offers you solutions that are economical, durable, long-lasting and easy to install.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Stormwater Piping Systems / Stormwater Drainage

    A high-quality drainage system is imperative for a strong infrastructure.  The integrity of roads, thoroughfares, parking lots and other paved surfaces depend on a reliable drainage system underneath to keep them intact.  ISCO has been helping solve customer`s drainage issues for years.  From the initial engineering planning phase to the finished product, ISCO is able to help.  ISCO offers all the pipe and fittings for any of your drainage projects. Selecting the longest-lasting, durable and cost-effective piping products is a key step in storm water management. To help you choose the best option for your project, ISCO Industries supplies HDPE, PVC pipe as well as perforated and HDPE corrugated tubing drain tile for storm water management applications.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Premium

    Grease removing in wastewater pipes

    Whether a collection system is handling domestic, commercial, or industrial waste; grease accumulation causes problems in wet wells, lift stations and pipelines. Problems with grease include interference with wet well level controls, reduced wet well capacity, plugging of pipes and pumps, and unsafe working conditions.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Premium

    Pipes and Storage Systems for Water Treatment Industries

    GCER has know-how and a large experience in the water business. We offer a range of industrial pipes and boiler of high quality combining good mechanical strength, lightness employment and a long service life. GCER present for any project of treatment of waste water and the desalination of seawater.

    By GCER based in Ksibet, TUNISIA.

  • Premium

    Piping & ducting solutions for the industrial industry

    All of the products manufactured by PROCO are designed to withstand even the most demanding industrial applications. We design our expansion joints and check valves to fit many different industrial applications, including paper and pulp systems, marine services, oil and gas, and many more. Whatever your industry may be, PROCO can help you find a solution for even your toughest industrial application. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Water Monitoring and Flow Measurement Systems for Water Supply

    Although there is enough water on earth, its uneven distribution, the rising population and our carelessness drinking water starts to get short. In the future more and more pipelines for drinking water will be built all over the globe. In order to operate huge and complex pipe networks efficiently, water flow measurement and flow monitoring will become necessary. The increasing efficiency of ultrasonic flow meters will make such calculations more and more effective.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Oxygen Generating Systems for Sewage Treatment

    Using Oxygen to Solve Waste Water Problems Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to: * Reduce nitrogen levels * Meet peak O2 demands * Have a back up to your aeration system * Pre-purify waste water * Control odors * Deter corrosion damage * Meet increased requirements regarding waste water purification

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Microbial testing in cooling water system industry

    Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire`s disease to reduced operating efficiency and eventually to equipment failure via microbiologically influenced corrosion (MIC).

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Force Main Systems Sulfide Odor Control with Hydrogen Peroxide

    Force main systems are typically high sulfide odor generators due to septicity conditions related to full pipe flow and a greater anaerobic slime layer (biofilm) thickness. Primary factors that influence sulfide loading generation in a force main include sewage temperature, BOD, retention time, pipe size and flow. Gaseous hydrogen sulfide (H2S) release at the force main discharge is usually the main concern related to odor and corrosion control needs; however, corrosion problems within the pipe can be of a concern (e.g. "crown cutting") at locations where air pockets can lead to concentrated H2S gas build up. Some basic considerations for assessing an appropriate sulfide odor treatment method for force main systems include: Retention time / duration of control Pump station type / cycling (e.g. vfd; start/stop, etc). Force main injection tap points, if any (e.g. air relief valves) Existence of intermediate re-lift stations or in series pump stations Manifold force main systems

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • EDI Solutions

    QUA’s FEDI® (Fractional EDI) stacks have superior hardness tolerance compared to the other EDI products on the market. With a dual voltage process this allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant's design economics and reliability. FEDI stacks are available in three different models which can be applied either for higher hardness tolerance or high water flow rates. MEGA FEDI stacks are ideal for large capacity, high flow systems normally required in heavy industrial projects such as power, petrochemicals, & electronics for high purity water needs. Each stack can handle treated water flow of up to 75 GPM . MEGA FEDI’s unique stackable design minimizes piping, reduces footprint, and makes it simple and easy to install on skids. FEDI-Rx products are specially designed for applications in pharmaceutical, biomedical and laboratory applications where installations require hot water sanitization to meet

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Continuous Monitoring of Wastewater

    The Sorbisense method allows for efficient monitoring of the sewage system and can help reduce costs of operation and environmental impact. The method is particularly well suited for tracking the source of periodic discharges, the identification of faulty pipe connections of the measuring of values in the recipient. The method also allows for measurements in dynamic sources - such as emissions from roads, roofs, parking lots and overflow

    By Sorbisense A/S based in Tjele, DENMARK.

  • REPLACING WATER SOFTENER WITH GREEN SCALEWATCHER WATER CONDITIONER

    Roper’s Restaurant, a cowboy themed restaurant in Albuquerque, New Mexico has replaced its water softener with the computerized, electronic, water-conditioner Scalewatcher from Scalewatcher North America. By installing Scalewatcher, the restaurant has avoided paying the $500 quoted for replacement media for its old water softener and also saved hundreds of dollars a year in salt and water thereby providing Roper’s with a short-term payback on the unit. Roper’s Restaurant, part of Outwest Eateries LLC dba, is located in a hard water area. This necessitated Bryce Chant, owner of Roper’s Restaurant using a water softener to prevent scale formation in the kitchen. “When I was given the price to repair our old water softener, I decided to install the Scalewatcher from Advance Plumbing”, said Bryce Chant of Roper’s Restaurant. We have had great success with it. Even though we had a water softener we still had hard water scale and a white ‘film’ in the dishwasher. Now with Scalewatcher that scale and ‘film’ has disappeared.” The average restaurant consumes 5,800 gallons of water daily, with 50% being used in the kitchen. If not properly treated, hard water can drain a restaurant’s bottom line due to the early renewal of capital equipment such as water heaters, boilers, coffee makers, dishwashers, steamers and other water-fed equipment. Hard water contains calcium carbonate that adheres to heating elements and the internal surfaces causing scale buildup that impairs efficiency. The limescale that deposits on the heating element will, if untreated, reduces efficiency, induces corrosion of the element and ultimately lead to appliance failure. In addition in restaurants, hard water also necessitates the use of additional detergents. In fact, for every additional grain of hard water, detergent use increases by between 2% and 4% per 1,000 gallons of water used. Many restaurants, like Roper’s use a water softener to reduce limescale. However, water softeners use copious amounts of both water and salt, which are expensive to buy and salt is also bulky to store. In addition, in many States now, including Southern California, municipalities and water departments are severely limiting, and in some cases prohibiting, the use of salt-regenerating water softeners due to concern regarding the increased levels of salt in ground water. The award-winning Scalewatcher system not only helps restaurants meet these regulations by minimizing salt usage but also saves money on salt purchase and has the additional benefit of removing scale from water-fed equipment. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “We are saving money each month because we do not have to purchase salt for the water softener and we are not dumping salt filled water down the drain because there is no brine process with Scalewatcher”, said Bryce Chant. “Living in New Mexico with our drought situation, I hated knowing all that water was being wasted. Scalewatcher is a truly ‘green’ technology that we are happy we have implemented”. Roper’s Restaurant has been so impressed with the Scalewatcher technology that the managers have bought units for their homes and have recommended it to family and friends. Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • KRYSTAL KLEEN CAR WASHES REMOVES WATER SOFTENERS AFTER SCALEWATCHER INSTALLATION

    Krystal Kleen Car Washes in Hoover, Alabama has removed the water softeners from its three self-service car washes following the installation of the computerized, electronic, water-conditioner Scalewatcher® from Scalewatcher North America. This has not only saved the company thousands of dollars a year in salt but also provided a short-term payback on the units. Krystal Kleen Car Washes is located in a hard water area, with Total Alkalinity of around 200mg/L. This necessitated Jim LeNoir, owner of Kyrstal Kleen Car Washes, using water softeners at his three premises to prevent scale formation and water spotting on the cars. “I decided to try Scalewatcher at Montevallo since this was the hardest water location of the three”, said Jim LeNoir. “I stored the water softener just in case it was needed. However, after a year the Scalewatcher was working just as efficiently as the water softener and the customers were happy. Next installation was at Calera with the same results and finally at Homewood which has a spot free rinse system.” All car washes, including conveyor or rollover; high-pressure touchless automatics and self-serve bays, use water as the primary means of removing the dirt, road grime, salt, and snow off the surface of the vehicle during the wash process. Water softeners are the mainstay in the wash industry, providing a means of removing the hard mineral deposits that prevent soap from working efficiently. Water softeners are utilized to overcome the calcium carbonate that is the primary component of water hardness. However, in many States now, including Southern California, municipalities and water departments are severely limiting, and in some cases prohibiting, the use of salt-regenerating water softeners due to concern regarding the increased levels of salt in ground water. The award-winning Scalewatcher system not only helps car washes meet these regulations by minimizing salt usage but also saves money on salt purchase and has the additional benefit of removing scale from lines and nozzles. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “All the water softeners have now been removed freeing up much needed space and saving me money. Best of all I no longer have to haul salt pellets”, concluded Jim LeNoir. Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 80 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Premium

    Chlorine Dioxide Water Treatment for the Irrigation Industry

    Irrigation Systems: A common problem encountered in all irrigation systems is growth of micro-organisms in the irrigation pipes causing poor flow, blockages and the potential for the spread of disease-causing organisms throughout the irrigated area, particularly fungal diseases. The micro-organisms flourishing in irrigation pipes include bacteria and fungi and, if sufficient light is present, algae. Irrigation pipes provide an ideal environment for the establishment of biofilm on the inside of the pipes.

    By NW Solutions based in Perth, AUSTRALIA.

  • Real-time In-situ Effluent Monitoring

    The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the UviLux BOD Indicator can be applied to both water supply and water recovery processing plants. For water supply processing, the UviLux BOD Indicator can be applied at the front end to the water intake to provide alarm of any contaminated water entering the plant. Applications within Waste Water Treatment Works can include monitoring of effluent levels at the final outflow point (into rivers and coastal areas) as well as the primary, secondary & tertiary stages, the data potentially feeding into energy saving systems to optimise process performances. The CTG UviLux BOD Indicator in-situ fluorometer can also be used within pipe and channel networks to test for incidences of black water and grey water cross-over.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • CUSTOMER CONFIRMS LONGEVITY OF SCALEWATCHER ELECTRONIC WATER CONDITIONER

    Scalewatcher North America, manufacturer of the original, patented and award-winning computerized electronic water-conditioner, states in its literature that the device is produced to last at least 20 years and comes with a 10 year warranty. However, no reports have been received on the longevity of the units sold since the company was launched over 20 years ago. Now a customer in Gilroy, California has come forward requesting a new Scalewatcher unit after the device she purchased in 1992 finally stopped working. She purchased the new Scalewatcher from local dealer, Aqua Genesis, and reported that: “ I noticed that the sprinklers are covering more of an area than before. When I squirt water on the black and white tile patio table there are no longer any calcium spots even if I do not dry it off. The tile shower and the clear shower door are easier to wipe down after my shower. The new ScaleWatcher is much better than before. It certainly was time to replace the old one.” The new, innovative, electronic Scalewatcher water conditioner uses proven technology to quickly and effectively dissolve existing limescale and prevent it recurring, returning water systems and water-fed appliances such as kettles, washing machines and dishwashers to their former efficiency. It also removes scale around faucets, sinks, baths, plugholes and shower roses as well as preventing white marks on shower screens and mould on shower curtains. The system requires no plumbing, chemicals or maintenance and is environmentally friendly. In addition scale costs money for householders through additional cleaning products, the early renewal of water–fed equipment and additional costs to heat water. It is estimated that 40% more energy is needed to heat water in a system fouled with ¼ inch of limescale. Commenting Jan de Baat Doelman, President of Scalewatcher North America says: “We have always built Scalewatcher electronic water conditions to last and this latest information confirms the device’s longevity. Scalewatcher will pay for itself in less than three years and then carry on providing homes with a scale free environment many more years to come. ” Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Amphibious multipurpose dredger for utilizing in construction projects

    The harder the conditions are, the greater the Watermaster`s advantages are.

    Civil engineering jobs in water are typical for Watermaster Classic. Watermaster is ideal when e.g. embedding cables and pipes in the bottom and it can also do other kinds of maintenance work effectively. The machine moves to the site with its own propulsion system and remote controlled spuds give proper anchorage for steady and efficient piling, excavating work as well as for cable mounting.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Civil engineering applications

    Civil engineering jobs in water are typical for Watermaster Classic. Watermaster is ideal when e.g. embedding cables and pipes in the bottom and it can also do other kinds of maintenance work effectively. The harder the conditions are, the greater Watermaster`s advantages compared to other technologies. The machine moves to the site with its own propulsion system and remote controlled spuds give proper anchorage for steady and efficient excavating work as well as for cable mounting.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • DOCUPAK LLC REDUCES COOLING TOWER CHEMICAL USAGE BY A THIRD

    Docupak LLC, a full service marketing company headquartered in Alabaster, Alabama, has reduced chemical usage by a third and removed all scale from its cooling tower at its plant after installing the patented, award-winning Scalewatcher computerized, electronic water-conditioner from Scalewatcher North America. In addition there are no longer signs of algae growth on the cooling tower louvres. Founded in 1998, Docupak, the operating name of Document and Packaging Brokers Inc., develops and distributes materials for businesses nationwide. In addition to its headquarters in Alabaster, Alabama, the company also operates a further plant in Alexandria, VA and has sales offices in Atlanta, Chicago, Cincinnati, Dallas, Los Angeles, Tampa and Washington, D.C. Aware that health agencies continually draw attention to the risks of limescale and algae in cooling towers and wanting to reduce the use of chemicals in the cooling tower, Plant Manager, Anthony Kinstley decided to install the Scalewatcher electornic water-conditioner through local dealer, Al Chatham of Water Processing and Well Supply in Harpersville, Alabama. An industrial Scalewatcher was installed on to the water-feed line to the building and then a further unit was specifically fitted on to the recirculation line of the cooling tower. “Since using the system the scaling on our cooling tower has been eliminated and we currently use only a third of the original chemicals intended for the water treatment within our system”, said Anthony Kinstley. Many air conditioning and refrigeration plant systems are water-cooled. The heat generated by cooling coils is removed by water, which is passed through a water-cooling tower. These are recirculating systems, which operate at temperatures ideal for bacterial and algae growth, and have plentiful supplies of nutrients. In cooling towers, temperature, water hardness, pH, scale and corrosion are all factors, which increase the chance of biofilms, algae and Legionella colonization. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “Scalewatcher has proven itself to be highly effective. I would highly recommend this product and service without limitation,” concluded Antony Kinstley. Scalewatcher models are based on continuous research and over 25 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and are shipped throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you