Only show results available in Virginia? Ok

water protection Applications

  • Protecting of Drinking Water Infrastructure

    Water abstraction points may be affected by spills from farms or factories, and deliberate contamination. Early warning monitoring systems are required to alert operators to these contaminants and to changes in key water quality parameters. A timely response is necessary to prevent contamination and disruption of the public water supply.

    Chelsea Technologies Group has developed FastGuard to observe the natural trends in water quality parameters and rapidly detect and report anomalies.



    FastGuard is ideally suited for early detection of contamination events. It gives prompt reporting and asessment of the threat and has high sensitivity with minimal false alarm rate.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Chemical Filtration in Water for the Environmental Protection / Waste Water Technology

    In waste water treatment systems our membranes are used with great success for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • WASTE WATER TREATMENT

    WASTE WATER TREATMENT MADE EASY WITH THE INTRODUCTION OF D-ANOOOZ PROCESS. IT WORKS ON VARIABLE INPUT OF EFFLUENT. LOW ENERGY CONSUMPTION, NO SOUND, MINIMUM MAINTENANCE. ENERGY CAN BE TAPPED IN THE FORM OF METHANE GAS FROM ANAEROBIC DIGESTION. TARGET CUSTOMERS ARE SCHOOLS, UNIVERSITIES, HOSTEL, HOTELS, HOSPITALS, RESIDENTIAL LAY OUTS.

    By DAKSHA GREENTECH INTERNATIONAL based in BANGALORE, INDIA.

  • Premium

    Drinking water solutions for the source water monitoring/ protection

    Problem: A challenging aspect of drinking water treatment is often predicting or monitoring the changes that occur with incoming water quality. Seasonality, weather events, agricultural practices or upstream discharges can influence the quality of both ground and surface water over time. With multiple variables impacting source waters, monitoring historical trends may not be sufficient to predict raw water changes or detect uncharacteristic events.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water intake protection monitoring for wastewater treatment industry

    Intake protection systems have been extensively installed to protect water treatment works, from ingress of polluted water and waste-water plants from toxic chemical loads. A suitable system typically comprises a suit of instrumentation, measuring key chemical, physical and indicator parameters dependant upon the identified risks, associated with the individual site activity or discharges from neighbouring industry.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Seawater Biotoxicity monitoring to protect the coastal waters of Italy

    The recorded death of fish in the river that flows out of the industrial zone of Scarlino has created the need of the installation of a biological alarm system. The decision was made to work with an automatic system, iTOXcontrol created by microLAN-The Netherlands represented in Italy by Ecotox Lds, which uses marine bacteria. The system compares the values of the light emission from these organisms at the entrance and exit of the canal, generating alarms in the presence of toxic substances.

    By microLAN On-line Biomonitoring Systems based in Waalwijk, NETHERLANDS.

  • Circuits Protections; nozzles, Injectors, etc. for filtration.

    The installation of an AZUD System eliminates the risk of clogging of nozzles, injectors, tubes and other small openings by removing the larger particles from the liquid flow.  It also helps in decreasing scale build up in the system and the accumulation of solids settling in the collection sump.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Solutions providing corrosion protection

    B-Team Corrosion Protection offers complete solutions providing corrosion protection for food processing plants. The composition of jointless lining systems comply with most food laws so that they are highly appropriate for use in the food processing industry. Typical applications in the food industry include:: Storage Tanks for starch production Pots and containers Sterilizers Processing zones Floors Water treatment systems Fermenters for the brewing industry

    By B-Team Corrosion Protection based in Bucharest, ROMANIA.

  • Channel Wall Protection

    Problem: Channels are oftentimes subject to debilitating erosion due to the water contained by the channel walls. Depending on the velocity of the water flow and the frequency and degree of stormwater runoff, severe hydraulic stresses upon the channel walls can pose significant dangers to the system.

  • Premium

    Concerned about PAHs in Parking Lot Sealcoats?

    There is growing concern - and regulations in the works - over the use of sealcoating products due to their high PAH content.  In the United States and elsewhere, most sealcoats are made from coal tar which can be toxic to aquatic life and threaten public water supplies from rain and runoff. Sitelab can be used to quickly check the concentrations of polycyclic aromatic hydrocarbons and determine if it's made from coal tar or alternative petroleum based black top sealants.  Got samples?  We'll test them for free!  Contact Sitelab Corporation for details.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Treatment of Municipal Water

    TIGG specializes in providing equipment and services for removal of disinfection byproducts, metals, organics and solids in the municipal water treatment market using activated carbon and other media. In addition to treatment systems for the municipal water market, TIGG can design and fabricate tanks for surge protection and emergency water storage.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • X-ray fluorescence XRF analysis for environmental protection and waste management

    To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well as to classify waste material and to specify products for recycling and disposal. Whether solids, sludge, filters, liquids or powders: there is a fast and simple sample preparation technique for every material type.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Premium

    Wastewater Testing for the the Water Treatment Industry

    There are strict regulations in place surrounding waste water, which makes it very important to monitor. Even small changes in aquatic ecosystems can have a huge impact in the chemical makeup of water, temperature, etc. By using real time monitoring on water quality, pollutants can be detected and mitigated before they pose a potential threat to these ecosystems and enter the water course. The rugged AP-2000 allows for real time testing of wastewater and helps to minimise risk of any potential fines. It is works to protect the device and allow for other essential parameters to be tested. Because it is portable, it is easy to transport between locations, and you can also save money from onsite visits by getting instant data readouts using telemetry.

    By AQUAREAD Limited based in Broadstairs, UNITED KINGDOM.

  • Wastewater Treatment

    AnoxKaldnes responds to the diverse water treatment needs of municipalities around the world with market-leading technologies and processes. Recognized as a world leader in environmental treatment, AnoxKaldnes operates as a supplier of technology and equipment for wastewater and drinking water treatment. Our process know-how has been acquired through years of extensive research and development. AnoxKaldnes`s fundamental philosophy is to offer specific solutions that optimize energy and cost factors. We are changing the look, performance, and reputation of Water and Wastewater Treatment Plants worldwide. For more than 25 years, AnoxKaldnes has designed and developed a wide variety of technologies to protect our most precious resources.

    By AnoxKaldnes AB - a Veolia Water Company based in Lund, SWEDEN.

  • Water measurement systems & sensors for water quality monitoring

    Effective water quality monitoring is the key to environmental protection of watercourses and for reliable process control and wastewater treatment.  Discharge consents under EPR regulations dictate that water quality monitoring is undertaken to ensure that consented parameters are below the consented concentrations.  Traditionally this has been done using water quality sampling methods but increasingly automatic water quality measurement sensors linked to real-time telemetry is seen as the most reliable and timely means of ensuring that treatment processes are operating efficiently and that EPR compliance is maintained.

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Floating Cover – Water

    Hexa-Cover Floating Cover provide an ideal cover for all forms of water i.e.: Reservoirs for Fire Protection Reservoirs for Fire Protection, Spill over tanks Spill over tanks, Wastewater Wastewater tanks, reservoirs, Cooling water Cooling water, Process water Process water, Reserve water reservoirs Reserve water reservoirs, Compensation tanks Compensation tanks, Irrigation Reservoirs for Irrigation, Collected surface water Reservoirs for reuse of collected surface water, Water settlement lagoons Water settlement lagoons, Storm water ponds Storm water ponds, Bird deterrent Bird deterrent, Drinking troughs Drinking troughs.

    By Hexa-Cover A/S based in Thisted, DENMARK.

  • Premium

    Municipal wastewater solutions for preliminary treatment industry

    Removing solids and grit plays a crucial role in protecting pumps and other equipment in a treatment facility. WesTech is your single source for headworks equipment to maximize your screening, washing, dewatering, grit removal and grit washing.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you