Only show results available in Virginia? Ok

water quality measuring Applications

  • Water measurement systems & sensors for water quality monitoring

    Effective water quality monitoring is the key to environmental protection of watercourses and for reliable process control and wastewater treatment.  Discharge consents under EPR regulations dictate that water quality monitoring is undertaken to ensure that consented parameters are below the consented concentrations.  Traditionally this has been done using water quality sampling methods but increasingly automatic water quality measurement sensors linked to real-time telemetry is seen as the most reliable and timely means of ensuring that treatment processes are operating efficiently and that EPR compliance is maintained.

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Water Quality Measurement and Control for Nutraceuticals

    The dietary supplement and nutraceutical market is changing rapidly in response to the FDA`s new Dietary Supplement Current Good Manufacturing Practices (cGMPS) `Final Rule` (21 CFR Part 111), published on June 25, 2007. The Final Rule adopts all requirements specified in 21 CFR 210 and 211, which affect pharmaceutical manufacturers, and apply to all companies that manufacture, package, label, or hold dietary supplements and nutraceuticals. Dietary supplements or nutraceuticals imported from outside the United States are also subject to the Final Rule.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Continuous Water Quality Monitoring

    The Sorbisense method allows for continuous monitoring of water quality. Measurements can be conducted as screenings of water catchments, warnings in catchments or directly into the supply system. This method makes it possible to identify and map known problems, but also to trace the source of emergent problems.

    By Sorbisense A/S based in Tjele, DENMARK.

  • Indoor air quality measurement

    CairTub allows the easy deployment of autonomous measurement points virtually anywhere. The system can be used in harsh weather conditions. It is also the ideal tool for low cost studies for the optimisation and setting-up of fixed air quality monitoring stations. Cairpol systems can be used for fugitive emissions and odour measurement on industrial sites like waste water treatment plants (WWTP), landfill, compost plant, along a street or motorway, or in any sensitive area. Cairpol monitoring systems also offer the possibility to measure continuously pollutant levels in workshop atmospheres, houses and public buildings.

    By Cairpol based in La Roche Blanche, FRANCE.

  • Water quality monitoring systems for cooling water treatment industry

    A number of treatment products are often added to prevent corrosion, scaling and fouling. Coating of sensors and other effects of these products must be taken into account when selecting analyzers. Discharge monitoring needs special attention because zero measurements must be reliable over time with little maintenance.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Premium

    Surface Water Quality Testing for the Environmental Monitoring Industry

    Aquaread stock a wide range of testing equipment designed to track a number of parameters and water quality testing measures. These can be used in many different bodies of water, including rivers, lakes, streams and seawater. The advantages of tracking water quality and testing for numerous parameters means that it is easier to notice changes which could cause damage to aquatic ecosystems. Early detection not only helps with monitoring water quality, but also helps to put mitigating measures in place. We have a wide range of parameters, although the most popular of these allow for surface water testing, pH, temperature, electrical conductivity and measuring levels of dissolved oxygen. These are standard measurements included in most standard Aquaprobes, although if you require more specific parameter testing then there are a number of additional parameters which can be added onto to the base Aquaprobe to compensate this.

    By AQUAREAD Limited based in Broadstairs, UNITED KINGDOM.

  • Water quality monitoring for brewery industry

    Monitoring process streams and waste streams continuously in a brew house can provide many benefits to operations. Monitoring product in process for color or concentration provides consistency and quality measures. Product loss can be quantified by monitoring waste streams. Processes can be improved to increase efficiency and minimize effluent waste. Effluent waste streams can also be monitored for organic loading with BOD and COD correlations to ensure compliance for discharge.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring for food & beverage industry

    Wastes that are rich in starch such as those that occur in potato processing industries require a balanced addition of other macronutrients such as nitrogen and phosphorus. In order to optimize the dosing of these nutrients it is essential to have a good idea about the organic load entering the biological treatment reactor. Measurement of colour can help with quality control and flavour consistency.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Ambient air quality monitoring solutions for remote sensing of ship emissions

    New regulation forces ships to lower the emissions of SO2. Ships travelling in SECA areas has to either run on low sulphur fuel, or install SO2 scrubbers. To measure the SO2 emissions from a ship is not an easy task. OPSIS provides the Port Authorities with a unique measurement principle where the emissions from the ship is measured remotely. Light is passing the emissions and by analyzing the light, concentrations of SO2 can be measured.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Online Monitoring for the Drinking Water Industry

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards.

    On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Water Treatment Solutions for Turbidity Removal

    Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change causing a turnover of those levels, bringing sediment, plants, and algae to the top.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Water monitoring technology for coastal & estuary

    Measurement of water quality in coastal regions and estuaries is critical in the characterization of hypoxic ‘dead zones’ as a result of nutrient loading and algal blooms in the water bodies. Sediment loading analysis through turbidity measurement is also important for coastal trend identification and modeling. Hydrolab and Sea-bird Coastal offer a variety of multiparameter water quality instrumentation and nutrient sensors for long-term coastal applications.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Microbial testing for water treatment industry

    Why wait until tomorrow to know today`s water quality? How clean is your water? Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water distribution systems and aids with disinfection and flush cycles. LuminUltra`s QGA test is the ideal tool to help save time & money and reduce risk in water treatment and distribution!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Continuous Monitoring of Surface Water

    The Sorbisense method is especially suitable for measurements in dynamic environments. For example, in rivers, streams and lakes.

    The method is innovative and allows you to implement continuous and cost effective measurements in both urban and in rural areas. For example, measuring the leaching of nutrients from the cultivation of wetlands and measuring water quality in rainwater and sewage.

    By Sorbisense A/S based in Tjele, DENMARK.

  • Premium

    High quality gas sensor solutions for total organic carbon (TOC)

    Minimising costs through measurement of CO2 concentration. Both water suppliers and water users need to know the quality of the water they are supplying, using and disposing of so as to minimise their costs. One measure of water quality is the organic carbon content (TOC). TOC is measured by oxidising the organic carbon to produce CO2 which is then measured and the value converted into a TOC measurement. Edinburgh Sensors supply sensors to measure the CO2 concentration produced by oxidising the organic carbon in a water sample, allowing the TOC to be calculated. This TOC value determines one measure of how clean the water sample is.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Online Monitoring for the Demi-Water Production Industry

    Demineralization is the process of removing mineral salts as well as organic impurities from water by means of ion-exchange and can be found in various industries such as the chemical, food & beverage, irrigation and filtration industries. The consuming side of the industry relies on ever increasing quality and availability of demi-water while the manufacturers have to balance cost/output. AppliTek provides high quality analytical tools to increase process efficiency and quality control. Continuous measurements with high accuracy are carried out on the critical QC/QA parameters of the deionizing process:

    • Silica
    • Low sodium
    • Total Organic Carbon

    By AppliTek NV based in Nazareth, BELGIUM.

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Water treatment for the pharmaceutical industry

    The pharmaceutical market is at the center of personal care, serving to protect public health and improve the quality and span of life. This global market requires treatment technologies to disinfect, measure, control and filter process water and wastewater generated from production.

  • Phosphonate Testing in Hard Water

    Testing phosphonates in hard water can be difficult due to interference from high levels of calcium. Here we present a phosphonate test method for hard water samples. The method is based on a chemical masking of the calcium. The WAT hard water phosphonate test uses C30 Spectrophotometer to measure the chromogen PMB and digital thermoreactor to digest the phosphonate compound. The thermoreactor capacity of 16 simultaneous vials provides for running critical data quality assurance samples.

    By WAT Australia Pty.Ltd. based in West Australia, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you