water quality measuring Applications in Australasia

  • Indoor air quality measurement

    CairTub allows the easy deployment of autonomous measurement points virtually anywhere. The system can be used in harsh weather conditions. It is also the ideal tool for low cost studies for the optimisation and setting-up of fixed air quality monitoring stations. Cairpol systems can be used for fugitive emissions and odour measurement on industrial sites like waste water treatment plants (WWTP), landfill, compost plant, along a street or motorway, or in any sensitive area. Cairpol monitoring systems also offer the possibility to measure continuously pollutant levels in workshop atmospheres, houses and public buildings.

    By Cairpol Environnement S.A Distributor in AUSTRALIA.

  • Water quality monitoring systems for cooling water treatment industry

    A number of treatment products are often added to prevent corrosion, scaling and fouling. Coating of sensors and other effects of these products must be taken into account when selecting analyzers. Discharge monitoring needs special attention because zero measurements must be reliable over time with little maintenance.

    By SWAN Analytische Instrumente AG Office in Hornsby, AUSTRALIA.

  • Premium

    Surface water quality testing for the environmental monitoring industry

    Aquaread stock a wide range of testing equipment designed to track a number of parameters and water quality testing measures. These can be used in many different bodies of water, including rivers, lakes, streams and seawater. The advantages of tracking water quality and testing for numerous parameters means that it is easier to notice changes which could cause damage to aquatic ecosystems. Early detection not only helps with monitoring water quality, but also helps to put mitigating measures in place. We have a wide range of parameters, although the most popular of these allow for surface water testing, pH, temperature, electrical conductivity and measuring levels of dissolved oxygen. These are standard measurements included in most standard Aquaprobes, although if you require more specific parameter testing then there are a number of additional parameters which can be added onto to the base Aquaprobe to compensate this.

    By Aquaread Limited Distributor in Scoresby, AUSTRALIA.

  • Premium

    Ambient air quality monitoring solutions for remote sensing of ship emissions

    New regulation forces ships to lower the emissions of SO2. Ships travelling in SECA areas has to either run on low sulphur fuel, or install SO2 scrubbers. To measure the SO2 emissions from a ship is not an easy task. OPSIS provides the Port Authorities with a unique measurement principle where the emissions from the ship is measured remotely. Light is passing the emissions and by analyzing the light, concentrations of SO2 can be measured.

    By Opsis AB Distributor in Knoxfield, AUSTRALIA.

  • Premium

    Water monitoring technology for coastal & estuary

    Measurement of water quality in coastal regions and estuaries is critical in the characterization of hypoxic ‘dead zones’ as a result of nutrient loading and algal blooms in the water bodies. Sediment loading analysis through turbidity measurement is also important for coastal trend identification and modeling. Hydrolab and Sea-bird Coastal offer a variety of multiparameter water quality instrumentation and nutrient sensors for long-term coastal applications.

    By The OTT Hydromet Group Distributor in AUSTRALIA.

  • Microbial testing for water treatment industry

    Why wait until tomorrow to know today`s water quality? How clean is your water? Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water distribution systems and aids with disinfection and flush cycles. LuminUltra`s QGA test is the ideal tool to help save time & money and reduce risk in water treatment and distribution!

    By LuminUltra Technologies Ltd. Distributor in Banyo, AUSTRALIA.

  • Premium

    Water monitoring instruments for surface water monitoring

    Surface water monitoring as an application covers many different environments and can require different equipment depending on the monitoring requirements. Possible environments include lakes, rivers and coastal waters where the monitoring may be focused on water quality or water level measurement. Aquaread offer instruments suitable for each of these environments and have a wide range of possibilities depending on the kind of data you wish to collect.

    By Aquaread Limited Distributor in Scoresby, AUSTRALIA.

  • Premium

    High quality gas sensor solutions for total organic carbon (TOC)

    Minimising costs through measurement of CO2 concentration. Both water suppliers and water users need to know the quality of the water they are supplying, using and disposing of so as to minimise their costs. One measure of water quality is the organic carbon content (TOC). TOC is measured by oxidising the organic carbon to produce CO2 which is then measured and the value converted into a TOC measurement. Edinburgh Sensors supply sensors to measure the CO2 concentration produced by oxidising the organic carbon in a water sample, allowing the TOC to be calculated. This TOC value determines one measure of how clean the water sample is.

    By Edinburgh Sensors Ltd Distributor in Otahuhu, NEW ZEALAND.

  • Premium

    Hydrological and environmental monitoring systems for Water resource management industy

    Water resource management refers to the conservation, custody and transport monitoring of water as a natural resource. Measurements are made to quantify water for the purpose of protection, forecasting, management, lawmaking, enforcement, policymaking, resource allocation and public reporting. Stevens has been providing quality products for water management for over 100 years.

    By Stevens Water Monitoring Systems, Inc. Distributor in Victoria, AUSTRALIA.

  • Phosphonate Testing in Hard Water

    Testing phosphonates in hard water can be difficult due to interference from high levels of calcium. Here we present a phosphonate test method for hard water samples. The method is based on a chemical masking of the calcium. The WAT hard water phosphonate test uses C30 Spectrophotometer to measure the chromogen PMB and digital thermoreactor to digest the phosphonate compound. The thermoreactor capacity of 16 simultaneous vials provides for running critical data quality assurance samples.

    By WAT Australia Pty.Ltd. based in West Australia, AUSTRALIA.

  • Premium

    Water treatment solutions for public swimming pools industry

    Technology from professionals for professionals. Does worrying about irregular water quality in the public swimming pool you are responsible for keep you awake at night? If so, that needn`t be the case. ProMinent has first-class treatment systems, including smart measuring and control technology, that are just the job.

    By ProMinent Group - ProMinent GmbH Distributor in Belrose, AUSTRALIA.

  • Premium

    Test Kits and Photometric Methods for agriculture, in food or water analysis

    When analyzing water and food, trust plays a very important role. Only careful analysis using tests that are performed correctly and are delivering sound results will help to maintain and improve our quality of life. With ready-to-use tests and test systems from Merck Millipore, you can trust your results. Our broad product range covers everything from water analysis to the control of production process up to the measurement of special food parameters.

    By Merck KGaA, Darmstadt, Germany Office in AUSTRALASIA.

  • Ground Penetrating Radars (GPR) for Pipes and Cables

    GPRs allow you to find a location, measure a depth of underground pipes, and cables, and other infrastructure items. The unique quality of GPR - they can find both metallic and non-metallic items with an equal efficiency.

    By Transient Technologies LLC Distributor in Coramba, AUSTRALIA.

  • Premium

    Ultraviolet disinfection systems for the USEPA UVDM validation

    For drinking water applications, atg UV Technology`s independently 3rd party validated UV systems are sized to deliver both 40 mJ/cm2 RED UV Dose, or a 3 log (99.9%) to 5 log (99.999%) reductions of Cryptosporidium. As a leading testing and validation protocol, the United States Environmental Protection Agency (US EPA) Ultraviolet Disinfection Guidance Manual (UVDGM) 2006 provides an advanced testing and validation method for guaranteeing UV disinfection performance for a large range of operating conditions, such as flow rate and water quality measured in UVT% (Ultraviolet Transmittance).

    By atg UV Technology Distributor in Sydenham, NEW ZEALAND.

  • Water Data Management Solution for Meteorology Sector

    The management of hydro-meteorological data demands the highest process standards. Both recorded and derived data from various observation areas are archived together, edited in graphical and tabular form, analyzed, evaluated and presented. In order that these tasks are carried out efficiently and economically, the support of a specialized software solution is required. Our water data management solutions offer a comprehensive spectrum of functions for integrated collection, processing, quality control, evaluation and publication of data from extensive hydro-meteorological measuring networks.

    By KISTERS AG Office in Weston Creek, AUSTRALIA.

  • Pig and Poultry Drinking Water Chlorine Dioxide Treatment

    Successful pig and poultry farming demands that measures are taken to control the introduction and spread of infectious agents. Chlorine Dioxide has been used very successfully in farming and slaughterhouses as a processing aid that is added to maintain water of good microbial quality. CleanOxide Chlorine Dioxide is used for sanitising hard surfaces and processing equipment to assist in the prevention of the propagation and transmission of disease.

    By NW Solutions based in Perth, AUSTRALIA.

  • Microbial testing in food & beverage industry

    Why wait until tomorrow to know today`s water quality? How clean is your water? Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water treatment and distribution systems used in the food and beverage industry, and aids with disinfection practices and flush cycles. LuminUltra`s QGA test is the ideal tool to help save time & money and reduce risk in food & beverage water management!

    By LuminUltra Technologies Ltd. Distributor in Banyo, AUSTRALIA.

  • Chemical Oxygen Demand (COD) Analyzer for Food & Beverage Industry

    Real Time Chemical Oxygen Demand Improves Wastewater Management. MANTECH’s PeCOD Analyzer water quality analysis technology provides food and beverage processors with accurate, real time data that enables them to make timely decisions and effectively manage their water and wastewater. The PeCOD Analyzer is a fast, green, accurate alternative to traditional chemical oxygen demand (COD) and biological oxygen demand (BOD) testing for measuring organics in wastewater. Rapid, reliable and economical testing helps companies remain in compliance with their permits and respond quickly when they are not.

    By MANTECH Inc. Distributor in Auckland, NEW ZEALAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you