Only show results available in Connecticut? Ok

water quality monitoring testing Applications

  • Premium

    Water Quality Monitoring

    By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA).

  • Premium

    Water monitoring instruments for water quality monitoring

    Measuring and looking after our water resource is a hot topic worldwide. Governments, Councils, Water Authorities, Companies and individuals all are increasing their efforts to help protect this resource. EU Legislation around monitoring landfills, nitrate levels and the water framework directive have been introduced to help guide water quality monitoring. Aquaread’s range of water quality instruments are all suitable for spot, short and long-term deployments and are a popular choice for companies as they...

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Surface water quality monitoring

    By HORIBA Europe GmbH based in Leichlingen, GERMANY.

  • Laser detection solutions for water-quality monitoring

    The technology of Spectral Fluorescence Signatures (SFS) is a very sensitive and selective tool to monitor many industrial processes on site and in real-time. The SFS analyzer series – SFS-Scanner and Instant Screener spectrofluorometers - are capable of detecting target substances even in complex mixtures without any pre-treatment of the samples.

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • Water measurement systems & sensors for water quality monitoring

    Effective water quality monitoring is the key to environmental protection of watercourses and for reliable process control and wastewater treatment. Discharge consents under EPR regulations dictate that water quality monitoring is undertaken to ensure that consented parameters are below the consented concentrations. Traditionally this has been done using water quality sampling methods but increasingly automatic water quality measurement sensors linked to real-time telemetry is seen as the most reliable and...

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Premium

    Water monitoring technology for nutrient monitoring

    Continuous monitoring of nutrient levels provides crucial information about daily, seasonal and event based changes in water quality conditions, and can be a strong indicator on the overall health of the water body. In recent years, monitoring of nutrients has grown in importance as it has come to the forefront in regulatory compliance of water quality in many regions.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly smelling...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Surface water quality testing for the environmental monitoring industry

    Aquaread stock a wide range of testing equipment designed to track a number of parameters and water quality testing measures. These can be used in many different bodies of water, including rivers, lakes, streams and seawater. The advantages of tracking water quality and testing for numerous parameters means that it is easier to notice changes which could cause damage to aquatic ecosystems. Early detection not only helps with monitoring water quality, but also helps to put mitigating measures in place. We have a...

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Water quality monitoring for the groundwater monitoring industry

    The reasons for testing water quality in groundwater are numerous. Monitoring water quality and conducting tests is a good way to gather data on aquifer hydraulics. It can also be used to monitor parameters such as rhodamine, which helps to understand movement of underground water. Human activities can have an impact on groundwater quality, and conducting tests in this field can help to track these effects. Leachate from landfill and fertiliser can both find their way into groundwater. It is important to monitor...

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Industrial solutions for water monitoring

    Water monitoring involves many different activitites, from ensuring the quality of surface or underground water, both for human beings and animal life, to the monitoring of a country’s water infrastructure. Wireless sensor networks are becoming increasingly popular in this area and ADVANTICSYS has already explored its use for many novel applications.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Premium

    Water monitoring instruments for surface water monitoring

    Surface water monitoring as an application covers many different environments and can require different equipment depending on the monitoring requirements. Possible environments include lakes, rivers and coastal waters where the monitoring may be focused on water quality or water level measurement. Aquaread offer instruments suitable for each of these environments and have a wide range of possibilities depending on the kind of data you wish to collect.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Drinking water solutions for the source water monitoring/ protection

    Problem: A challenging aspect of drinking water treatment is often predicting or monitoring the changes that occur with incoming water quality. Seasonality, weather events, agricultural practices or upstream discharges can influence the quality of both ground and surface water over time. With multiple variables impacting source waters, monitoring historical trends may not be sufficient to predict raw water changes or detect uncharacteristic events.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water solutions for the industrial processes sector

    Water is a critical component of almost any industry’s process and careful monitoring of water chemistry can have a dramatic impact on your quality, environmental impact, and bottom line. However, it is often difficult for operators to understand how their water chemistry will impact their process, particularly when the tools to acquire that data often don’t exist. This makes it incredibly costly and difficult to acquire the data you need to make decisions.

    By FREDsense Technologies Corp. based in Calgary, ALBERTA (CANADA).

  • Premium

    Water monitoring equipment for Surface water industry

    Easily and accurately assess the physical, chemical, and biological characteristics of any aquatic system. From spot sampling to long-term remote monitoring, In-Situ has the right equipment for your surface water quality monitoring project.

    By In-Situ, Inc. based in Fort Collins, COLORADO (USA).

  • Bio-based screening technologies solutions for the water quality industry

    Being one of the key necessities of life, water should be submitted to a thorough quality control. Targeted chemical analysis of priority compounds can give an impression of the chemical quality, but may not cover the entire load of pollutants that evoke biological effects. CALUX assays are successfully applied in the identification of water samples that are polluted with biologically active toxicants even at low levels and address the complexity associated with the compound mixtures.

    By BioDetection Systems b.v. based in Amsterdam, NETHERLANDS.

  • Premium

    Water monitoring equipment for Hydraulic fracturing industry

    Boost operational efficiency, prevent fracking water contamination and ensure regulatory compliance at your shale oil and gas site. In-Situ’s EPA-approved fracking water quality technologies help you achieve best practices at lower cost, protecting your company and water resources.

    By In-Situ, Inc. based in Fort Collins, COLORADO (USA).

  • Premium

    Waste water treatment plants Personnel Safety & H2S filter management

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. As a result of the confinement of the waste water stations, toxic components such as H2S and...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • CH4 Monitoring in Air

    CH4 (Methane) is a colorless, odorless natural gas that is used in a wide variety of industrial applications such as power generation and chemical production. It is also a byproduct of many biological and geological processes, fracking, and gas drilling. It is highly flammable and creates amounts of carbon monoxide as its combustion byproduct. Methane needs constant monitoring in waste water treatment (for co-generation) and to ensure proper process control (e.g. to determine burning efficiency). A quality CH4...

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Water monitoring instruments for groundwater monitoring

    Low flow groundwater sampling is a methodology used around the world to simulate ambient flow conditions and take water quality readings. A wide variety of pumps are used to draw a sample from the well such as bladder, inertial or peristaltic pumps and usually combined with a flow controller. Once the sampling methodology for your site has been selected, then choosing the right multi-parameter probe is vital.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you