Only show results available in Virginia? Ok

water recycling system Applications

  • Wastewater Recycling

    TIGG’s activated carbon wastewater systems allow industry to meet environmental effluent requirements and discharge directly to POTWs or permitted surface waters. In some cases TIGG’s systems are used to recycle wastewater for non potable water applications to lessen demand on local water resources.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • Premium

    Recycling and processing of WEEE

    Next to processing shredder light and heavy shredder fraction the Ad Rem machinery is also capable of processing waste of electrical and electronic equipment. WEEE can be processed on the same machinery as ASR is processed without any modifications. This makes it possible to get more input into the system and therefore costing less per ton.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    Patented Waste Water Recovery System for Body Shop Waste Capture

    The GEOMAT Waste Water Recovery Systems are designed to be ideal for semi-permanent installations where installing a ground recovery system is not desired or economical. A Body Shop is an ideal application for this system as it can be custom designed and manufactured to specific needs while meeting all EPA regulations.

    By GEOMAT based in Tampa, FLORIDA (USA).

  • Premium

    Patented Waste Water Recovery System for Marine Refinishing Industry

    Due to recent expansion of EPA regulations regarding discharge of water containing contaminants, owners of boats and marinas have had to heighten their awareness regarding waste water containment. If caught discharging any contaminated water overboard, even an ounce or less of light oil mixed with bilge water will produce a visible sheen on the ground or on the water. This is identified by the EPA as a reportable discharge, of which large fines are possible including clean-up costs, and even criminal prosecution when flagrant violations are detected. The GEOMAT Waste Water containment system can be customized to fit any size marine application such as refinishing, marine detailing, and waste disposal.

    By GEOMAT based in Tampa, FLORIDA (USA).

  • Premium

    Patented Waste Water Recovery System for Heavy Machinery & Parts Cleaning

    The GEOMAT systems can be designed to any specifications to fit your business needs - including maintaining and/or cleaning aviation equipment, military vehicles, golf course or farming equipment.

    By GEOMAT based in Tampa, FLORIDA (USA).

  • Dewatering and water purification for plastic recycling industry

    The preparation of plastic waste is an important process both for protection of raw materials as well as for reduction of waste. In this context, BELLMER KUFFERATH systems can be applied for all kinds of operations containing wet preparation processes.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Heavy-duty balers for paper mills

    We manufacture heavy-duty type ATS110-110 balers, adjusted to your specifications, and with a large 120 x 190 cm filling shaft, 5 horizontal binding devices, 110–205 ton compression force, and 45–180 kWs of power. We also offer smaller balers such as the ATS75-100 and ATS75-75. Each baler can be equipped with an anti-blocking system for dealing with congestion due to an excess of loaded material. We also offer smaller automatic channel presses without the binding device for water extrusion from the waste during paper production.

    By Anis Trend, d.o.o., based in Loški Potok, SLOVENIA.

  • Automated solutions for the municipal sludge recycling using dredges

    LWT`s dredging systems can be used for municipal sludge recycling applications. Sludge is mixed with compost and used in nurseries, sod farms, and agricultural applications.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Premium

    Industrial air pollution control for the recycling and waste management

    Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

  • Premium

    Chemical Filtration in Water for the Environmental Protection / Waste Water Technology

    In waste water treatment systems our membranes are used with great success for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • ElectroCoagulation Water Treatment Plant

    EnviroTech Limited, with distributors in Abu Dhabi, Dubai, Sharjah and Ajman in the United Arab Emirates specialise in a comprehensive range of air conditioning and refrigeration energy saving systems, grey water recycling systems and waste water treatment systems. Our Energy Management System target markets include:- Hotels, Offices, Leisure, Shopping Malls, Restaurants and Retail, Government Buildings, Schools and Universities, Factories, Cold Stores, Supermarkets Water Treatment and Energy Saving Systems EnviroTech Limited with Head Quarters in London, England and Masdar City, Abu Dhabi specialise in a comprehensive range of Air Conditioning Refrigeration Energy Saving Systems manufactured in England, UK and Grey Water Recycling Systems, Waste Water Treatment Systems generally Designed and Made in England in the UK. The water treatment and energy saving systems include ElectroCoagulation and ElectroChlorination systems which require low energy usage with no chemical requirement

    By EnviroTech Limited based in Masdar City, UNITED ARAB EMIRATES.

  • Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

    The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

    Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

    At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

  • Water treatment research for microelectronics industry

    As devices get smaller and the fabrication plants get larger, the purity of the water required for ultrapure water systems increases. In terms of water reuse, the industry has relatively conservative attitudes towards recycling water for ultrapure water applications, but wastewater is treated and reused for cooling and other less critical purposes. Besides semiconductors, two other silicon-based sectors of the microelectronics industry need large volumes of highly pure water: flat panel displays (FPD) and photovoltaics (PV). Although, both sectors are in the process of maturing we anticipate that the increasing complexity of FPD and PV devices will create demand for even higher purity water.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Process Belt Meshes for Dewatering / Pressing with Belt Presses

    WEAVEinMotion process belts are effective and robust cores for belt presses which are particularly efficiently acting systems for dewatering sludges and fruit mashes. A decrease in transport, disposal and recycling costs is obtained thanks to the reduction in volume achieved.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Dewatering applications for screw presses in pulp and paper mills

    Stock Thickening: Between Primary and Secondary Refining Stage. Between Secondary and Tertiary Refining Stage. In Front on High-Density Stock Chest. In Front of Dispersion Systems in Recycle Mills. Pulp Washing for Pine Tar and Chemical Removal.

    By Press Technology & Mfg., Inc. based in Springfield, OHIO (USA).

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Wastewater Treatment for Car Wash

    Our current solution is based on several years of experience with water treatment for car wash systems using Rotating Bed Biofilm Reactor technology (RBBR). When combined with a flotation unit, solids are separated from the water, most of which can be recycled back to the washing system. Rotating Bed Bio Reactor (RBBR) developed by Clewer and specific microbe population are patented and suitable for use larger scale applications.

    By Clewer OY based in Turku, FINLAND.

  • Biogas to Elecricity

    The range of supply of biogas to electricity solutions is from 10 kW to 1 MW. All the components of the solution are provided with matching capacities. It comprises the biogas digester system of the desired capacity, gas storage, biogas cleaning system to get rid of H2S from the gas, and the biogas genset. In the digester system, one may have a pre-digester or a feed mixing chamber or both. On the post-digester side, liquid from the slurry is separated and is recycled for feed preparation. It reduces the overall fresh water demand of the scheme. The digester itself may be temperature controlled and the input for the same could be given from heat recovery of the genset or from a solar heating system or from any other heat source as the case may be.

    By Kirloskar Integrated Technologies Limited based in Kothrud, INDIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you