Only show results available in Virginia? Ok

water reservoir Applications

  • Premium

    Algae control in raw water reservoirs

    Increase the water quality, lower chemical consumption, and prevent taste and odor problems without harming the ecosystem.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Algae control in industrial reservoirs

    Increase the water quality and efficiency of your cooling water.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Wastewater treatment systems for reservoirs and impoundments

    For reservoirs and impoundments, GURNEY ENVIRONMENTAL offers highly efficient methods to mix, destratify and reaerate large areas.

    By Gurney Environmental Ltd. based in Kings Lynn, UNITED KINGDOM.

  • Ground Penetrating Radars (GPR) for Fresh Water Reservoirs Eploring

    In hydrobiology GPR also find its applications: fresh water reservoir bottom structure. find items lying on the reservoir’s bottom and inside bottom sediment. measure of peat and other bottom sediments thickness . search for underwater piping and other infrastructure items. archaeological underwater explorations.

    By Transient Technologies LLC based in Kyiv, UKRAINE.

  • Premium

    Algae monitoring of drinking water reservoir -

    Due to green algae problems in the water reservoir of a drinking water treatment plant, the ALGcontrol was installed to continuously monitor the algae concentrations and possible toxic blue green algae blooms. During almost 4 months the ALGcontrol measured the total chlorophyll and cyano chlorophyll concentrations of the water reservoir. In order to be able to compare these results, second off-line controls were carried out using the ISO 10260 chlorophyll-a quantification (extraction into ethanol, spectrophotometric detection at 665 and 750 nm). The results of the off-line standard lab method show a good correlation with the measurements of the ALGcontrol. The good correlation can be verified as well at high as at low concentrations of total chlorophyll.

    By microLAN On-line Biomonitoring Systems based in Waalwijk, NETHERLANDS.

  • Water Data Management Solution for Lake / Reservoir Management

    Whether it’s for hydro electric production, irrigation operations, or long term ecosystem monitoring, utilize KISTERS solutions to monitor lakes and reservoirs.

    By KISTERS AG based in Aachen, GERMANY.

  • Premium

    Core Analysis for unconventional reservoirs

    Low field Nuclear Magnetic Resonance (NMR) is routinely used in core analysis laboratories to examine the T2 relaxation time distribution of fluids in core plugs. These distributions can be interpreted to give information on: pore size distributions; permeability; total and effective porosity; free fluid index and bound water volumes. The partnership between Oxford Instruments and Green Imaging Technologies allows us to integrate hardware and software to enable any core analysis laboratory to generate these petrophysical results without the need for in-depth knowledge of NMR.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Water Quality in watersheds

    Metro Vancouver serves an area of 282,000 hectares (approximately 1,088 square miles). The drinking water supplied to the 2.3 million residents of this growing community is sourced from three major reservoirs – Capilano, Seymour and Coquitlam. These vast watersheds, located in the mountains north of Vancouver, gather billions of gallons of snowmelt and rainwater. From these reservoirs, the water is treated and filtered to remove turbidity and potentially harmful micro-organisms ensuring quality drinking water is available to homes throughout the Metro Vancouver district.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Premium

    algae control in drinking water plants

    By controlling algae, cyanobacteria and fouling LG Sonic can efficiently reduce taste and odor problems in a treatment plant. The performance of a drinking water treatment plant is consistent with the amount ol contamination in the water. Growth of algae and other fouling in and before a treatment plant can cause various problems within the process. In general, these issues are related with taste or odor of the water. Growth of algae, cyanobacteria and bacteria within the basins of the plant itself, increase the demand of chemicals or filtration and in turn creating problems with THM (trihalomethane) formation. Other common issues are growth of toxin and geosmin producing cyanobacteria (blue-green algae) within the intake reservoir or dam. These molecules give the water an unpleasant `earthy ` taste.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Monitoring of Algae in Drinking Water

    The UniLux in-situ fluorometer can be configured to detect a number of key parameters that are of importance to the Water Supply Industry. Primarily, the detection of Chlorophyll a in stored water systems, such as reservoirs, assists in the planning and informs decisions on water abstraction in relation to natural algae blooms that regularly occur throughout the year. As well as Chlorophyll a, these in-situ fluorometers can detect cyanobacterias, such as Phycocyanin and Phycoerythrin, which are often associated with algae groups of a toxic nature. Knowledge of concentrations of algae within the water can assist in determining the loading into water processing plants.

    These in-situ fluorometers are available as single parameter sensors (UniLux), or 3 channel sensors (TriLux).The CTG FastFlow fast repetition rate fluorometer provides information on the physiological state of algae it monitors. As well as providing detailed information on the growth rate of the algae (which can indicate the occurrence of a future algae bloom), it can immediately inform and alarm on toxins that have accidentally or deliberately been introduced into the water systems, as with the FastGuard system. The FastFlow differs from the FastGuard system in that it logs and displays detailed information on the state of the algae monitored for operational requirements.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Floating Cover – Water

    Hexa-Cover Floating Cover provide an ideal cover for all forms of water i.e.: Reservoirs for Fire Protection Reservoirs for Fire Protection, Spill over tanks Spill over tanks, Wastewater Wastewater tanks, reservoirs, Cooling water Cooling water, Process water Process water, Reserve water reservoirs Reserve water reservoirs, Compensation tanks Compensation tanks, Irrigation Reservoirs for Irrigation, Collected surface water Reservoirs for reuse of collected surface water, Water settlement lagoons Water settlement lagoons, Storm water ponds Storm water ponds, Bird deterrent Bird deterrent, Drinking troughs Drinking troughs.

    By Hexa-Cover A/S based in Thisted, DENMARK.

  • Premium

    Water Monitoring and Flow Measurement Systems for Water Power

    Hydro power contributes to supplying approximately 3,5 per cent of electric energy generated worldwide. Its share in power generation from renewable resources lies at 18 per cent and will continue to grow as resources of fossil fuels are depleted. Hydro electric performance depends essentially on the usable altitude difference between upper and lower reservoir, and hence the resulting water flow. In order to use the “fuel” water in an optimal way, the flow velocity has to be monitored without any interruptions. Ultrasonic flow meters, flow sensors and clamp-on flow meters (OR clamp-on technology) are ideal for accurate flow metering and flow monitoring.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Monitoring surface water for wastewater treatment industry

    Pollution Risk: Surface water encompasses storm water derived from hard standing areas, river water and reservoirs. All types of surface water are at risk from ingress of pollution and therefore need to be monitored. On-line continuous monitoring can identify and alarm pollution so corrective action can be taken

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Continuous Monitoring of Nitrates and Other Water Quality Parameters

    Nitrate is one of the most important parameters in assessing surface and ground water quality. Nitrates are naturally present in surface and ground waters in low concentrations, but are harmful to humans and livestock and cause aquatic ecosystem degradation in high concentrations. Nitrates enter the environment as human-induced pollution from a variety of sources, but the largest source is from agricultural fertilizer runoff . Other sources include wastewater treatment discharge, septic systems, and from pet waste. Nitrate is highly soluble in water and therefore readily leaches into water sources, whereas other human associated pollutants, such as phosphates and ammonia, are not transported as easily. This ability to be quickly transported into ground and natural waters such as drinking water wells, aquifers, reservoirs, lakes, and streams, coupled with its health and environmental implications make nitrate pollution and monitoring of major concern.

    By Hanna Instruments, Inc based in Woonsocket, RHODE ISLAND (USA).

  • Premium

    Geotextiles solutions for hydraulic constructions sector

    Water is irreplaceable for life and for a great many businesses. It is a guarantee of survival and a scarce resource. Today`s society demands increasingly large volumes of increasingly high-quality water. TenCate Geosyntehtics has had a constant hand in the creation of water management infrastructure. In the last 20 years it has built more than 30 dams of a wide range of types and has used for that purpose the most modern of construction systems. TenCate filtration systems offer optimized hydraulic properties with high compression strength. Sensitive hydraulic structures - dams, dykes, canals, reservoirs - require perfect water control. Whether used to protect banks, around a drainage structure or against clay sealing cores, TenCate filtration geosynthetics achieve this level of requirement.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Geosynthetic Lining for Ponds

    GCLs can be used for decorative ponds, golf course water features, fish ponds, water reservoirs, and wastewater lagoons. Their self seaming installation requires no specialized equipment, and their self-healing characteristics promote long life and high performance.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Gas Permeation Analysis

    Dissolved Species Analysis Dissolved species analysis employing Hiden's high sensitivity membrane sampling technology for analysis of respiratory gases, hydrocarbons and sulphides is applied to a wide range of application areas including: Ecolological studies in sea water Bio fuel production from algae Pollution monitoring in river, estuary and reservoir waters Soil core analyses Fermentation

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Premium

    Wastewater technology for the oil exploration and refinery

    In the secondary recovery stage of an oil reservoir, process water plays a central role, just as in the extraction of natural gas. After the oil exploration, the produced water must be separated from the oil and gas. The process water needs to be prepared in order to be re-injected into the water cycle of production. For this purpose, highly efficient separation methods are required.

    By AWAS International GmbH based in Wilnsdorf, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you