Only show results available in Virginia? Ok

water risk Applications

  • Electrodeionization

    The Fractional Electrodeionization (FEDI) process is an advancement of conventional EDI. The patented dual voltage process allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant& design economics and reliability. By incorporating a two-stage separation process with different voltages the FEDI process is able to: Achieve a higher hardness tolerance by having distinctly different concentrate chambers with separate reject streams and thus reducing the potential of hardness scaling. Optimize power consumption by using higher electrical current only where required. Ensure the best water quality, continuously consistently by removing a major part of the deionization load in the hardness removal zone, while residual ionic impurities are effectively removed in the silica removal zone;, which stays in a polishing mode.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Wastewater Testing for the the Water Treatment Industry

    There are strict regulations in place surrounding waste water, which makes it very important to monitor. Even small changes in aquatic ecosystems can have a huge impact in the chemical makeup of water, temperature, etc. By using real time monitoring on water quality, pollutants can be detected and mitigated before they pose a potential threat to these ecosystems and enter the water course. The rugged AP-2000 allows for real time testing of wastewater and helps to minimise risk of any potential fines. It is works to protect the device and allow for other essential parameters to be tested. Because it is portable, it is easy to transport between locations, and you can also save money from onsite visits by getting instant data readouts using telemetry.

    By AQUAREAD Limited based in Broadstairs, UNITED KINGDOM.

  • Microbial testing for water treatment industry

    Why wait until tomorrow to know today`s water quality? How clean is your water? Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s Quench-Gone Aqueous (QGA™) test kit instantly measures the total microbiological content of any water sample to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing water distribution systems and aids with disinfection and flush cycles. LuminUltra`s QGA test is the ideal tool to help save time & money and reduce risk in water treatment and distribution!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • EDI Solutions

    QUA’s FEDI® (Fractional EDI) stacks have superior hardness tolerance compared to the other EDI products on the market. With a dual voltage process this allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant's design economics and reliability. FEDI stacks are available in three different models which can be applied either for higher hardness tolerance or high water flow rates. MEGA FEDI stacks are ideal for large capacity, high flow systems normally required in heavy industrial projects such as power, petrochemicals, & electronics for high purity water needs. Each stack can handle treated water flow of up to 75 GPM . MEGA FEDI’s unique stackable design minimizes piping, reduces footprint, and makes it simple and easy to install on skids. FEDI-Rx products are specially designed for applications in pharmaceutical, biomedical and laboratory applications where installations require hot water sanitization to meet

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Advanced Ultrafiltration Modules

    The Q-SEP Ultrafiltration membranes incorporate high-strength, hollow fibers that deliver superior performance without the risk of fiber breaks. They are made from a hydrophilic polyether sulfone material with excellent low fouling characteristics. These hollow fiber membranes operate under a pressurized inside-out flow configuration for superior performance. These hollow fiber UF membranes offer reliable removal of turbidity, microorganisms & viruses. Turbidity can be reduced to less than 0.05 NTU. Typically, a 6-log removal for bacteria, giardia & cryptosporidium, while a 4-log removal for viruses, can be achieved. The Q-SEP modules contain an advanced UF fiber, prepared by an innovative patented cloud point precipitation method. This method ensures a very uniform pore size distribution and high pore density in the membrane. As a result, the product water quality from the modules is significantly better than the quality from conventional UF modules at a very operating pres

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Water quality testing for drinking water services in remote areas

    In 1985, the University of Surrey in collaboration with Oxfam developed the Oxfam DelAgua Portable Water Quality Monitoring Test Kit. The Oxfam DelAgua kit enables field workers to test water quality in remote and isolated situations and in circumstances where there is no access to a water testing laboratory. Since its development in 1985, the water test kit has been used by all the major International NGO-s and other aid agencies in over 130 countries around the world.

    In 2006, The University of Surrey and other investors founded DelAgua Water Testing Limited to take over the management of the DelAgua organisation. Since then, various improvements have been made, including:

    • The upgrading of all kits
    • The upgrade of the design, manufacturing and distribution functions
    • R&D to produce a portable microbiological testing kit that provides quantitative results in less than 20 minutes.
    • The upgrade of existing services and the introduction of new services, including:
      • Free access to a water quality risk assessment software program on DWT`s website
      • Free access to a library of reference documents on DWT`s website

    In addition to distributing its own kits and consumables, DWT also offers a distribution service for other manufacturers` products. The most popular products are detailed on this website, but those not detailed can also be supplied - DWT is able to source in excess of 60,000 products from numerous manufacturers.

    DWT is committed to providing services and products to enable the provision of clean drinking water for everyone around the world.

    By DelAgua Group based in Marlborough, UNITED KINGDOM.

  • FEDI - Electrodeionization

    The Fractional Electrodeionization (FEDI) process is an advancement of conventional EDI. The patented dual voltage process allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant’s design economics and reliability. By incorporating a two-stage separation process with different voltages the FEDI® process is able to: Achieve a higher hardness tolerance by having distinctly different concentrate chambers with separate reject streams and thus reducing the potential of hardness scaling. Optimize power consumption by using higher electrical current only where required. Ensure the best water quality, continuously & consistently by removing a major part of the deionization load in the ‘hardness removal zone’, while residual ionic impurities are effectively removed in the ‘silica removal zone’, which stays in a polishing mode.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Power-independent flow measurement with GPRS

    In a pit water purification system it was necessary to detect the discharge volumes. The operator wanted a regular and automatic transmission of readings. On the selected measurement place no mains power connection was available. Due to the risk of vandalism, it was not planned to install a switching cabinet. See the NIVUS solution for this measurement task here.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Microbial testing for industrial process water sector

    Real-time Information for Same Shift Problem Solving! Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s QuenchGone21 Industrial (QG21I™) test kit instantly measures the total microbiological content in industrial process waters to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing process water systems and aids with disinfection and cleaning cycles. LuminUltra`s QG21I test is the ideal tool to help save time & money and reduce risk in industrial process water management!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Microbial testing in cooling water system industry

    Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire`s disease to reduced operating efficiency and eventually to equipment failure via microbiologically influenced corrosion (MIC).

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Monitoring surface water for wastewater treatment industry

    Pollution Risk: Surface water encompasses storm water derived from hard standing areas, river water and reservoirs. All types of surface water are at risk from ingress of pollution and therefore need to be monitored. On-line continuous monitoring can identify and alarm pollution so corrective action can be taken

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Water intake protection monitoring for wastewater treatment industry

    Intake protection systems have been extensively installed to protect water treatment works, from ingress of polluted water and waste-water plants from toxic chemical loads. A suitable system typically comprises a suit of instrumentation, measuring key chemical, physical and indicator parameters dependant upon the identified risks, associated with the individual site activity or discharges from neighbouring industry.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Non-chemical water treatment in hospitals

    Hospitals using hardwater can suffer from serious scaling in water heaters , sterilisers and elsewhere. Fluid Dynamics has a simple non chemical solution to the problems of hospital scaling. Fluid Dynamics also has solutions to the problems of legionella risk in hospitals

    By Fluid Dynamics International Ltd based in Maidenhead, UNITED KINGDOM.

  • Premium

    Contaminated Water Filtration

    Industry standard best practices are designed to ensure that all work done on Asbestos Abatement Projects is done to the highest level of safety and risk management. Containment of the generated waste water fibers and debris is critical to proper compliance and worker safety. If these fibers are not captured and contained, they can be very harmful for the environment, on-site workers and the occupants of neighboring areas. Exactly how you approach your containment and capture solutions will depend on the individual site’s risk assessment report. If you need help identifying solutions to the issues raised in the report, feel free to contact our customer service department and we can review your options together. Water from showers at Asbestos Abatement sites is often contaminated with asbestos fibers from washing protective gear and equipment. This water must be filtered prior to discharge into a drain.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Aeration and mixing technologies for food and beverage wastewater treatment

    Eliminate the risk of downtime: We understand how important water is in food and beverage manufacturing. We have been serving the food and beverage industry for many years and know how difficult it is to meet tightening FDA and EPA requirements, while still meeting your production schedule.  We offer customized food and beverage wastewater treatment solutions that support sustainable operations, reduces total cost of ownership, and keeps you in compliance… giving you the assurance you need so you can focus on quality production.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Q-Sep - Advanced Ultrafiltration Modules

    The Q-SEP Ultrafiltration membranes incorporate high-strength, hollow fibers that deliver superior performance without the risk of fiber breaks. They are made from a hydrophilic polyether sulfone material with excellent low fouling characteristics. These hollow fiber membranes operate under a pressurized inside-out flow configuration for superior performance. These hollow fiber UF membranes offer reliable removal of turbidity, microorganisms & viruses. Turbidity can be reduced to less than 0.05 NTU. Typically, a 6-log removal for bacteria, giardia & cryptosporidium, while a 4-log removal for viruses, can be achieved. The Q-SEP modules contain an advanced UF fiber, prepared by an innovative patented cloud point precipitation method. This method ensures a very uniform pore size distribution and high pore density in the membrane. As a result, the product water quality from the modules is significantly better than the quality from conventional UF modules at a very operating pressur

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Circuits Protections; nozzles, Injectors, etc. for filtration.

    The installation of an AZUD System eliminates the risk of clogging of nozzles, injectors, tubes and other small openings by removing the larger particles from the liquid flow.  It also helps in decreasing scale build up in the system and the accumulation of solids settling in the collection sump.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Ozone/UV systems for swimming pool water treatment

    Studies have proven that chlorine use has negative consequences due to the formation of byproducts, i.e. chlorinated organic compounds and chloramines. Irritation of eyes and mucous membranes, drying out the skin as well as “chlorine smell” are well known troubles. However, these byproducts also accelerate the corrosion in pool halls and significant risk is given by their toxicity (chloramines, combined chlorine) and/or carcinogenicity. Higher rate of asthma prevalence is one of the consequences. These are the reasons why the combined chlorine content - as a marker of chlorination byproducts presence - is to be monitored and why its limit values are specified by authorities. To meet the limits can be tedious and expensive because more water has to be changed and heated up. Chlorine disinfection is not sufficient to prevent infections caused by some waterborne pathogens as dangerous protozoan parasites Cryptosporidium parvum and Giardia lamblia.

    By Lifetech based in Brno, CZECH REPUBLIC.

  • Premium

    Pure drinking water solutions for high-security facilities

    In June 2002 an Al-Qaeda cell was captured in Rome just before they poisoned the water supply of the US Embassy. This event demonstrates the added risk that government buildings, military contractors, royal palaces and other high-security facilities can encounter. These facilities should not trust an outside company to deliver bottled water, but instead must stay in full control of their own water supply at all times. Our secure drinking water systems are in over 100 US Embassies around the world because they provide a consistent supply of fresh, distilled water, which is the highest level of protection against the full range of possible contaminants. We provide premium water distillers for these high-security facilities as well as small systems to protect the staff at home. We also provide risk assessment and water education services.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Vacuum excavation solutions for micro-tunneling / foundation stabilization sector

    Vac‐Tron vacuum excavation equipment can be used for the application of Micro‐Tunneling and/or Foundation Stabilization. Microtunneling is used to construct small tunnels. This process enables access to plumbing, electrical wiring, termite repair, flooding, crawl space and historical restoration without compromising the integrity of the foundation. By using the “soft‐dig” technique under the foundation or slab, there is no risk of damaging any previous utilities or structural damage to the building. The debris removed will only have to be handled one time. This process would be best served with the Vac‐Tron AIR855 model to accommodate the volume of debris, as well as having the flexibility of back‐filling with the dirt that was removed after the process has been completed.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you