Only show results in Virginia? Ok

water testing instrumentation Applications

  • Premium

    Water monitoring instruments by waste water testing

    Waste water is one of the most important environments to monitor. Increasingly strict regulations require cleaner waste water discharges into both watercourses and sewer systems. Monitoring waste water before discharge allows you to detect any potential pollutants and trigger re-treatment, so that these can be removed. Aquaread designs and manufactures a range of water testing equipment that is ideal for various environments and deployments.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Premium

    Water monitoring instruments for water quality monitoring

    Measuring and looking after our water resource is a hot topic worldwide. Governments, Councils, Water Authorities, Companies and individuals all are increasing their efforts to help protect this resource. EU Legislation around monitoring landfills, nitrate levels and the water framework directive have been introduced to help guide water quality monitoring. Aquaread’s range of water quality instruments are all suitable for spot, short and long-term deployments and are a popular choice for companies as they continue to increase their focus and monitoring practices to protect water quality globally.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Premium

    Water monitoring instruments for surface water monitoring

    Surface water monitoring as an application covers many different environments and can require different equipment depending on the monitoring requirements. Possible environments include lakes, rivers and coastal waters where the monitoring may be focused on water quality or water level measurement. Aquaread offer instruments suitable for each of these environments and have a wide range of possibilities depending on the kind of data you wish to collect.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Premium

    Instruments and analyzers for spectral DNI measurements

    Where the pyrheliometer is most suitable to quantify the total DNI of the solar spectrum. The spectroradiometer gives details about the energy distribution which is important for PV or CPV cell research. The solar spectrum wil change with the angle of incidence and its path through the atmosphere. Photons wil be reflected, scattered or absorbed. Big absorbers of infrared irradiance are water vapor, carbon dioxide, and ozon.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Water monitoring instruments for groundwater monitoring

    Low flow groundwater sampling is a methodology used around the world to simulate ambient flow conditions and take water quality readings. A wide variety of pumps are used to draw a sample from the well such as bladder, inertial or peristaltic pumps and usually combined with a flow controller. Once the sampling methodology for your site has been selected, then choosing the right multi-parameter probe is vital.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Premium

    Flow Measurement instrumentation for digital air / gas, steam, water flow meters

    For over 40 years Sierra has advanced our flow technology to offer customers around the globe the most cutting-edge thermal technology on the market. From heavy industrial to research and analytical applications, Sierra has a wide range of digital air flow meters and controllers with digital output protocols for easy network integration. Sierra offers digital gas flow meters and mass flow meters across two core technologies: Capillary Thermal, and Immersible Thermal. Buy a large selection our air flow meter solutions online, ships the next day!

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Monitoring Once Through Cooling Water

    Fluorescence-based oil in water monitors from Turner Designs Hydrocarbon Instruments have been used extensively in industrial water processes for more than 20 years. These low maintenance fluorescence monitors have no significant measurement disturbance from water turbidity or naturally occurring organics in the water. Oil in water monitors can help detect and prevent major oil spills that may cause significant environmental damage and regulatory compliance infractions.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before discharge of effluent wastes. This can be done manually with handheld instruments or automatically with in-line monitor/controllers.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Laboratory instruments solutions for environmental industry

    The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its inhabitants.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Water Leak Location for the Leak Detection Industry

    Our water leak location instruments are used to firstly identify leaks in water distribution networks (pre-locate) and then to pinpoint their position using one of our correlators and/or ground microphones.

    By Hermann Sewerin GmbH based in G├╝tersloh, GERMANY.

  • Final effluent monitoring for wastewater treatment industry

    Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent monitoring and perform water analysis for key consent parameters.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Monitoring Well Inspection With 3/4-inch Video Camera

    Allegheny Instrument's Nano downhole camera is used to visually inspect groundwater monitoring wells from 1-inch diameter and larger to depths of 1,000 feet with the Heavy Duty hand reel system and depths of 2,000 feet with the Deluxe motorized winch.

    By Allegheny Instruments, Inc. based in Monterey, VIRGINIA (USA).

  • Moisture Monitoring for Liquid Benzene Feed Stock

    Moisture needs to be measured in feed stock gases in the manufacture of polymers . For example, pre-dried benzene is fed in to a reactor containing hydrochloric acid – if the dryers are not operating properly moisture in the benzene promotes acid corrosion of the reactor and process lines. Several processes require water concentrations of specific values to optimise efficiency and yield; in such cases more sophisticated instruments are required.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Dust monitoring and Sand Storm Monitoring

    The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and activities. They reduce visibility, layer on skin and cloths, infiltrate buildings and find their way into food and drinking water leaving a permanent sandy feeling in your mouth. Traditional dust monitoring instruments whether they be purely filter based gravimetric samplers or continuous monitors utilising Tapered Element Oscillating Microbalance (TEOM) or Beta Attenuation (BAM) simply are unable to cope with the high dust loads created by these storms. The filters on these instruments are quickly clogged and no further measurements are possible until a service technician visits to replace filters and filter tapes. In dust storm events this is impossible. Therefore, over the past few years a need for alternate technology which are non filter based, can cope with extremely high dust loads, require minimal maintenance and can operate off solar power has been employed in regions such as the Gobi Desert of China for the continuous monitoring of dust storm events. These instruments have demonstrated that an instrument can measure dust storm events with maintenance performed only once every 12 months. That it is possible to communicate remotely and that these systems can not only provide an early warning for dust events but have the accuracy and sensitivity to be an extremely useful tool in gauging hourly changes of visibility. Infact such instruments have been utilised by a number of EPAs around the world, including all Australian EPAs for the purpose of measuring ambient visibility as well as providing an accurate indication of rising dust events.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you