Only show results available in Virginia? Ok

water utility system Applications

  • Premium

    Environmental Control for the Water Utility Industry

    This section contains applications relevant for compliance, water treatment, drinking water and natural sources.

    Collecting, treating and distributing water to consumers and industry, in compliance with quality standards, means a challenging task to water companies. Both private as public water treatment entities have to manage carefully and sustainably their sources, processes and even distribution networks. AppliTek supports them not only with an extended portfolio of analyzers but also with its experience in the advice, design and construction of complete monitoring systems and stations.

    By AppliTek NV based in Nazareth, BELGIUM.

  • PEHD membrane sealing systems for dams

    In the mining industry, dams are built in order to create large storage basins.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Premium

    Chemical Water Treatment for cooling and processing water

    An optimal heat transfer is the most important point in every water cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops for cooling and process water systems customized solutions, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and biocides.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Chemical Water Treatment for cleaning

    Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or impurities.

    By Kurita based in Tokyo, JAPAN.

  • Trenchless solutions for the utilities sector

    Whether you need to replace an aging conveyance system or simply increase capacity, we’ve got the equipment to keep you online as much as possible, make quick work of the job and ensure your continued profitability.

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA).

  • Early warning systems for drinking water

    Drinking water supply and distribution systems around the world (a critical and interdependent component of a nation’s infrastructure) are vulnerable to both intentional and accidental contamination. Unusual water quality may serve as a warning of potential contamination. The available physico-chemical sensors utilize general water quality parameters, such as free chlorine, oxidation reduction potential (ORP), total organic carbon (TOC), turbidity, pH, dissolved oxygen, chloride, ammonia, nitrate to detect the contamination. Generally, one or more of these water quality parameters will change due to the injection of a contaminant. However, no single chemical sensor responds to all possible contaminants nor can they give any indication of the potential toxicity of complex mixtures.

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Amphibious multipurpose dredger for utilizing in construction projects

    The harder the conditions are, the greater the Watermaster`s advantages are.

    Civil engineering jobs in water are typical for Watermaster Classic. Watermaster is ideal when e.g. embedding cables and pipes in the bottom and it can also do other kinds of maintenance work effectively. The machine moves to the site with its own propulsion system and remote controlled spuds give proper anchorage for steady and efficient piling, excavating work as well as for cable mounting.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Ozone Systems for Municipal Drinking Water, Waste Water, Water Reuse and Aquifer Recharge

    Piper Environmental Group, Inc. has partnered with Primozone Production AB in Löddeköpinge, Sweden for our municipal, groundwater, and wastewater applications. Our successful installations since 2015 have made our choice an obvious one. Primozone’s applications are in 30 countries worldwide, with documented OPEX (Operating Expense) savings that are key for companies and utilities who truly believe in a low carbon footprint, sustainability, and reducing their operating costs in maintenance, electricity and oxygen consumption.

    By Piper Environmental Group, Inc. based in Castroville, CALIFORNIA (USA).

  • Premium

    Elimination of mercaptan odor for wastewater lagoons

    Wastewater lagoons are utilized to collect and stabilize wastewater. Approximately one third of all U.S. secondary waste treatment facilities employ some type of pond system. Lagoons can become septic, or contain compounds that product significant odors.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • KRYSTAL KLEEN CAR WASHES REMOVES WATER SOFTENERS AFTER SCALEWATCHER INSTALLATION

    Krystal Kleen Car Washes in Hoover, Alabama has removed the water softeners from its three self-service car washes following the installation of the computerized, electronic, water-conditioner Scalewatcher® from Scalewatcher North America. This has not only saved the company thousands of dollars a year in salt but also provided a short-term payback on the units. Krystal Kleen Car Washes is located in a hard water area, with Total Alkalinity of around 200mg/L. This necessitated Jim LeNoir, owner of Kyrstal Kleen Car Washes, using water softeners at his three premises to prevent scale formation and water spotting on the cars. “I decided to try Scalewatcher at Montevallo since this was the hardest water location of the three”, said Jim LeNoir. “I stored the water softener just in case it was needed. However, after a year the Scalewatcher was working just as efficiently as the water softener and the customers were happy. Next installation was at Calera with the same results and finally at Homewood which has a spot free rinse system.” All car washes, including conveyor or rollover; high-pressure touchless automatics and self-serve bays, use water as the primary means of removing the dirt, road grime, salt, and snow off the surface of the vehicle during the wash process. Water softeners are the mainstay in the wash industry, providing a means of removing the hard mineral deposits that prevent soap from working efficiently. Water softeners are utilized to overcome the calcium carbonate that is the primary component of water hardness. However, in many States now, including Southern California, municipalities and water departments are severely limiting, and in some cases prohibiting, the use of salt-regenerating water softeners due to concern regarding the increased levels of salt in ground water. The award-winning Scalewatcher system not only helps car washes meet these regulations by minimizing salt usage but also saves money on salt purchase and has the additional benefit of removing scale from lines and nozzles. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “All the water softeners have now been removed freeing up much needed space and saving me money. Best of all I no longer have to haul salt pellets”, concluded Jim LeNoir. Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 80 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Premium

    Water treatment solutions for pulp & paper industry

    The Pulp & paper industry is characterized by high operational water usage. Rising water costs due to increasing water scarcity and more stringent environmental regulations have led pulp and paper companies to seek innovative and efficient water treatment solutions to assist them to reduce their water footprint, decrease operational cost and maintain regulatory compliance. Therefore, water quality management and conservation through the utilization of an advanced pulp and paper water treatment system is increasing becoming critical to the entire operations of a pulp & paper manufacturer.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Gravity Main Sulfide Odor Control with Hydrogen Peroxide

    Gravity main sewer systems include major trunk lines and the tributaries that feed them. Hydrogen sulfide (H2S) odor builds up in the collections system as the flows collect from upstream reaches and become larger, deeper and more septic (oxygen depleted) in the downstream reaches more near to the wastewater treatment plant. In general, most of the more significant hydrogen sulfide odor and corrosion control problems occur in the major trunk systems segments conveying flow to the plant. Therefore, selection of sulfide treatment for gravity systems has several options depending mainly on: Duration of control required Degree of septicity (oxygen depletion) Location of target control points or "hot spots" Location of available dosing points upstream of "hot spots" Availability of civil infrastructure and utilities Sensitivity to hazardous chemicals

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Amphibious multipurpose dredger for maintaining and cleaning industrial ponds

    Maintenance is easily done by utilizing Watermaster`s suction dredging capabilities and independent moving capabilities.

    Watermaster is easy to transport to the site on a trailer and from there the dredger simply walks into the pool by itself. In the pool Watermaster moves with its own propulsion system and can also move to another pool by using its excavator assembly and spuds. It can pump the mass into another pool up to 1,5 kilometres away. By backhoe work it can build and repair the pool banks.

    Watermaster can also recover valuable materials from tailings ponds and drainage ponds.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Vacuum excavation solutions for car wash pit clean out

    The Vac‐Tron trailer mounted vacuum system is the perfect tool for cleaning out car wash pits. By utilizing the vacuum portion of the system you can remove the oil, grease, chemical slick and garbage debris from the washout pits. Once all the debris is removed, you can utilize the high pressure water wand that offers 4 GPM at 4,000 psi to clean out the structure (i.e., walls, floor of the pits, grate overhead) leaving it clean and free of any build‐up. The Mini‐Combo Model is equipped with a jetter system which offers 15 GPM at 2200 psi. Use of this efficient tool will enable you to clean out the 4” lines that connect the washout pits so as to ensure proper drainage of contaminated water to the holding tank, if applicable.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. The fixed installation products for these purposes are the Gasmet™ CEM II measurement system, and the Gasmet™ FCX Gas Analyzers, both of which utilize the FTIR measurement technique for simultaneous multicomponent analysis of the sample gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you