Only show results in Texas? Ok

waterjetting Applications

  • Premium

    Waterjet protection

    By TST Sweden AB based in Boras, SWEDEN.

  • Pavement maintenance

    Problem: Highway and runway markings must be removed and repainted regularly, and runways face the additional problem of rubber build-up every time an airplane lands. Grinding it away can damage the pavement, and sandblasting generates a lot of ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Casting removal

    Problem: Ceramic shells are typically chipped away from investment castings, a process that is not only tedious and labor-intensive, but can damage the casting inside. The more intricate the casting shape, the bigger the ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Concrete cleaning

    Problem: You’ve got concrete where you don’t want it, or you’ve got a coating on concrete that’s failed and you need to get it ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Deburring & deflashing

    Problem: A burr left on a metal part – or flash on a molded one – not only sends a message of poor quality, it can cause serious problems down the road. If it breaks off later inside a fuel injector or other critical part, it can cause clogs or damage that can affect ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Paint shop cleaning

    Problem: Build-up on grates, skids, hooks, and carriers reduces paint shop efficiency and often leads to a below-quality finish. Chemical stripping and incineration are effective, but are hard on operating personnel and expose them to ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Pipe & tube cleaning

    Problem: As liquid product hardens, it builds up in a tube or pipe and restricts flow and efficiency. Removing it with drills or brushes can be hard, slow work, resulting in too much ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Water jet cutting

    Problem: Blades wear as they cut, and the duller they get, the less precise their cuts. Manual cutting exposes workers to safety and ergonomic ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Environmental technology for chilling - crystallisation industry

    For the generation of chilled water (down to 0°C) as well as for diverse crystallisation processes Körting steam jet chilling plants are used. This special chilling technique uses waste heat at a temperature level down to 80°C as motive energy. The first plants with combination of power/heat/chilling coupling are already in ...

    By Körting Hannover AG based in Hannover, GERMANY.

  • Unmanned surface vehicle solutions for surveillance

    There has been an increase in the use of autonomous patrol boats in extreme environments for reconnaissance and surveillance where demands for precision, endurance, and reliability are paramount. Maritime and border force customers work with us to develop unmanned patrol boats. At OceanAlpha, we have experience working with and developing various interfaces for propulsion systems, including outboard motors, diesel oil propellers, and water jets for high speed operations. Our USV is fitted with a high-resolution ...

    By OceanAlpha Group Ltd. based in Wan Chai, CHINA.

  • Tank & tote cleaning

    Problem: Manual cleaning of tanks and totes used to ship and store plastics and chemicals can take many hours. It also requires people to work in confined spaces, which is discouraged by today’s safety ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Environmental technology for shipbuilding industry

    In shipbuilding Körting water jet ejectors do all critical pumping jobs on board a ship: bilging inaccessible tank and ballast spaces. conveying solids on long dredger suction heads. essential component in fresh water production plants on ...

    By Körting Hannover AG based in Hannover, GERMANY.

  • Tube bundle cleaning

    Problem: Heat exchanger systems lose efficiency when deposits build up in, and on, tube bundles. High-pressure water jetting cleans both I.D. and O.D. very effectively, but manual methods clean a limited area at a time and expose operators to strain and ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Hydrodemolition

    Problem: The impact of concrete breakers and jackhammers is not limited to deteriorated concrete. It can damage rebar and produce vibration that generates microfractures in sound concrete. Not to mention the noise and the ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Diverse Surface Treatment Technologies for Military Industry

    We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and ballistic ...

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Drill pipe cleaning

    Problem: When scale and hardened mud build up in oil well drill pipe, plugged drill heads are the usual result. This reduces efficiency and increases downtime. Traditional rattle-and-brush systems can leave some build-up behind and require a rinse operation to flush debris and drilling ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Surface preparation

    Problem: Removing rust, scale and coatings with grit blasting requires containment and/or clean-up, and those costs can have a significant impact on profitability. For contractors doing environmental remediation – removing asbestos or lead paint, for example – the containment issue is even more ...

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Vacuum excavation solutions for lateral clean out – Jettings

    Vac-Tron Industrial Vacuum Equipment makes manhole clean out easy and efficient for municipal public works departments. Our Mini Combo Series can clean out a manhole in seconds, allowing a reduction in man-hours for this type of job, helping reduce overhead and accomplishing more for the taxpayer’s ...

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Fire fighting vehicles, rescue services trucks & civil protection vehicles for high pressure washing & intensifiers applications

    To avoid explosion or fire, electricity or gas driven engine power packs cannot be used, if inflammable fluid has flown out at a place of ...

    By Neron Pumps based in Ranica, ITALY.

  • Vacuum excavation solutions for locate underground utilities / soft dig / pot holing

    Vacuum excavation is fast becoming a best practice in the field of construction and site excavation. Why? Because it uses jets of air (air excavation) or water (hydro excavation) to loosen soil, instead of a heavy metal claw. After loosening, the soil is pulled out of the ground through an air vacuum hose to a debris tank for later disposal or back-filling. Using non-destructive technology can quickly, safely and economically excavate in areas inaccessible to conventional digging equipment like backhoes and ...

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you