Only show results available in Virginia? Ok

well level monitoring Applications

  • Remote level monitoring

    Leachate level control is a primary function in landfills. Although different types of pumps are used, all pumps need to be installed with a totalizing counter mounted at the top of the well head to monitor the pump cycles and to calculate the total volume of leachate removed from the well. Instead of manually monitoring the leachate level and collecting the pump count data, use FlexPower™ Counter Nodes to wirelessly send data from the pumps back to a central control location to save time and eliminate errors.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Premium

    Monitoring solutions for the process Monitoring

    Maintain specification in your process stream or bench top setup with a Cerex process analyzer. Cerex UV3000 F Series analyzers accurately detect gases from ppb level to percent level concentrations via a fiber coupled probe for precise control of a process stream. The F series are also well suited to fiber couple to a custom cell for laboratory analysis, and feature user programmable alarm levels to control process functions or give warning when a process filter needs replacement. Cerex analyzers are also available customized to customer specification.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Real-time In-situ Effluent Monitoring

    The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the UviLux BOD Indicator can be applied to both water supply and water recovery processing plants. For water supply processing, the UviLux BOD Indicator can be applied at the front end to the water intake to provide alarm of any contaminated water entering the plant. Applications within Waste Water Treatment Works can include monitoring of effluent levels at the final outflow point (into rivers and coastal areas) as well as the primary, secondary & tertiary stages, the data potentially feeding into energy saving systems to optimise process performances. The CTG UviLux BOD Indicator in-situ fluorometer can also be used within pipe and channel networks to test for incidences of black water and grey water cross-over.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Environmental radiation monitoring

    Every day, wherever we go, we are exposed to minute amounts of environmental radiation.* This environmental radiation is emitted continuously, day and night, from various objects and substances in the natural world and our living environment.

    Most environmental radiation consists of three types: alpha rays (α), beta rays (β) and gamma rays (γ).  HORIBA`s PA-1000 `Radi` environmental radiation monitor makes it easy for non-specialists to measure even minute levels of gamma rays.

    * Environmental radiation, also known as natural radiation, includes radiation emitted from space, soil, stones, the ground and the air, as well as from manmade objects such as concrete and buildings

    By HORIBA Europe GmbH based in Leichlingen, GERMANY.

  • Contrail(R) - for real-time hydrometeorological monitoring and early flood warning

    Visualization of information from your hydrometeorological & early flood warning network in a matter of seconds is critical in the decision making process. Contrail supports the data collection, processing, archiving and dissemination of your hydrometeorological and water resources data in one place. OneRain's Contrail enterprise level software platform collects, processes and archives rainfall, flow, stream level, weather station and many other hydrometeorological data from multiple sources including ALERT/ALERT2 line-of-sight radio data, cellular data, and satellite weather gauge data, and any web-accessible data sources as well as neighboring outside sources such as USGS gauges, METAR, TIDES, HADS, RWIS... . The platform supports any number of users from their laptops, their smartphones, their tablets, however they are connected to the Internet. At its core are the advanced alarm and notification capabilities. Used in Early Flood Warning, Safety of Dams, Emergency Management...

    By OneRain Incorporated based in Longmont, COLORADO (USA).

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a role in the determination of odor annoyance are: odor concentration and intensity, frequency, appreciation, duration, synergy and location. CHROMATOTEC® proposes an automatic solution to well identify the origin and the level of odors.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Mercury monitoring for ocean cruises

    Researchers at Battelle Pacific Northwest Laboratory used a Tekran 2600 on a 2009 ship cruise. Due to the low levels of mercury in water, Tekran provided them with a custom 2600 Event Table to pre-concentrate mercury from multiple samples to push the detection limit lower. When planning an ocean bound cruise, instrument dependability is a paramount concern. At sea, there is no possibility to return instrumentation to the manufacturer for quick repair. The Tekran 2600 has a well deserved reputation for dependability and performance. If any repairs are necessary, the instrument is highly user-serviceable and easy to maintain.

    By Tekran Instruments Corporation based in Knoxville, TENNESSEE (USA).

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. The fixed installation products for these purposes are the Gasmet™ CEM II measurement system, and the Gasmet™ FCX Gas Analyzers, both of which utilize the FTIR measurement technique for simultaneous multicomponent analysis of the sample gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Moisture Monitoring for Natural Gas & LNG

    The presence of moisture in high-pressure natural gas from production wells causes pipelines and associated valves to freeze. High moisture content also leads to the formation of hydrates of the liquid hydrocarbons present, thus causing further difficulties. The moisture content of the gas also adversely affects the calorific value of the gas, thus lowering the quality and value of the product. Moisture is therefore measured at the point of extraction, at export stations, at gas storage locations and in the transmission grid. As natural gas often contains high levels of contaminants, more complex systems are required to maintain instrument performance over prolonged periods and to verify data collected in spot-check moisture analysis.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Noise and vibration monitoring for the construction site

    By implementing a noise and vibration monitoring system, the impact of construction site activities can be managed by: Complying with legal requirements relating to public health sanctioning the absence of appropriate precautions to limit abnormally high levels of noise and vibrations. Taking environmental quality considerations into account (HQE approach). Limiting noise and vibration pollution with the comfort of neighbouring residents in mind. Enabling companies in the public works and construction industry to adopt a transparent approach to communication with local residents, in order to avoid resistance and instead gain their support for a given project. Providing the site manager with reliable and official data, should it be required. 01dB offers solutions for construction professionals to suit the requirements of each building site. It provides them with metrological systems (such as the certified DUO sound level meter, dB4 and MR2002) with 01dB WebMonitoring services to ensure optimal control of noise & vibration impact of the construction work, using as well communication tools intended for the general public.

    By ACOEM based in Limonest, FRANCE.

  • X-ray fluorescence XRF analysis for environmental protection and waste management

    To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well as to classify waste material and to specify products for recycling and disposal. Whether solids, sludge, filters, liquids or powders: there is a fast and simple sample preparation technique for every material type.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you